聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

脉冲激光在液体中激发的声波特性研究

理论上分析了脉冲激光在液体中产生的声波波阵面随光声源形状的变化,以及不同激发机制下光声脉冲波形的差别,并从实验中得出了脉冲CO2激光光声脉冲频谱特性.结果表明光声波波阵面为球面或柱面,热弹机制激发双极性的光声脉冲,汽化机制激发单极性的光声脉冲,CO2脉冲激光在水中激发的声波频谱峰值主要在100 kHz以下.通过选择光声源的形状和激发机制可以获得所需的光声信号.     

Transition from decelerated to accelerated cosmic expansion in braneworld universes

Braneworld theory provides a natural setting to treat, at a classical level, the cosmological effects of vacuum energy. Non-static extra dimensions can generally lead to a variable vacuum energy, which in turn may explain the present accelerated cosmic expansion. We concentrate our attention in models where the vacuum energy decreases as an inverse power law of the scale factor. These models agree with the observed accelerating universe, while fitting simultaneously the observational data for the density and deceleration parameter. The redshift at which the vacuum energy can start to dominate depends on the mass density of ordinary matter. For _m = 0.3, the transition from decelerated to accelerated cosmic expansion occurs at z _T ≈ 0.48 ± 0.20, which is compatible with SNe data. We set a lower bound on the deceleration parameter today, namely > − 1 + 3 _m /2, i.e., > − 0.55 for _m = 0.3. The future evolution of the universe crucially depends on the time when vacuum starts to dominate over ordinary matter. If it dominates only recently, at an epoch z < 0.64, then the universe is accelerating today and will continue that way forever. If vacuum dominates earlier, at z > 0.64, then the deceleration comes back and the universe recollapses at some point in the distant future. In the first case, quintessence and Cardassian expansion can be formally interpreted as the low energy limit of our model, although they are entirely different in philosophy. In the second case there is no correspondence between these models and ours.     

Mode-locked performance of hybrid soliton pulse source utilizing fiber grating external cavity lasers

Mode-locking characteristic of hybrid soliton pulse source (HSPS) utilizing linearly chirped raised-cosine flat top apodized fiber Bragg grating (FBG) is investigated by using coupled-mode equations. It is found that the fundamental repetition frequency range of HSPS is significantly extended by using linearly chirped raised-cosine flat top apodized FBG instead of linearly chirped Gaussian apodized FBG. The range of repetition frequencies over which proper mode-locking is obtained is 2-3.3 GHz with linearly chirped raised-cosine flat top apodized grating whereas this range is 2.1-2.95 GHz with linearly chirped Gaussian apodized grating.     

基于相关序列脉冲的布里渊光时域反射测量系统解码方法研究

布里渊光时域反射测量(BOTDR)系统空间分辨率和传感距离存在相互制约的关系.相关序列脉冲编码技术可用于解决这一矛盾,但直接对编码脉冲的布里渊散射采样信号进行解码,会因采样时间间隔小于编码单位脉冲宽度而导致解码信号的失真,从而降低了系统空间分辨率和测量精度.分析了直接互相关解码对BOTDR系统空间分辨率的影响,提出一种...     

V型稠密介质中脉宽对超短脉冲和频谱及其CEP依赖性的影响

利用不含慢变包络近似和旋波近似的全波Maxwell-Bloch方程组的数值解,研究脉宽对稠密V型三能级原子介质中超短激光脉冲和频谱及其载波包络位相(CEP)依赖性的影响.结果表明:脉宽较小时,脉冲分裂数目少,频谱较宽,高频部分显著,CEP的变化对脉冲及频谱的影响较大,尤其对子脉冲间的时间间隔及频谱高频部分强度大小的影响更为显著;随着脉宽的增大,脉冲分裂数目增多,频谱宽度变窄,高频部分强度明显降低,CEP的变化对脉冲及频谱的影响减弱.     

线性变压器源驱动相对论速调管放大器的初步实验

 利用新研制的紧凑型线性变压器驱动源（LTD）脉冲功率源二极管产生的电子束源,开展了S波段长脉冲相对论速调管放大器（RKA）的初步实验研究。采用无箔空心阴极和0.9 T恒流源引导磁场从LTD二极管引出了电压600 kV、束流6 kA、脉宽150 ns的环形电子束,该电子束经过1个同轴输入腔和2个同轴调制腔的调制后,产生了幅度5 kA、脉宽110 ns的基波调制束流,采用该调制束流驱动同轴微波提取腔,辐射输出了峰值功率820 MW/110 ns的辐射微波,效率28％,增益36 dB。同时,开展了重复脉冲RKA和相位特性的实验研究,重复频率10 Hz运行时,辐射微波达到800 MW/100 ns,相位抖动小于 20°。     

放电脉冲重频准分子激光器在不同应用领域的发展现状(英文)

研究了脉冲宽度为25～40 ns的放电脉冲XeCl准分子激光器的工作参数。结果显示,激光器产生的脉冲能量为0.2～0.7 J,重复频率为100 Hz,表明在泵浦功率为2.8～3.3 MW/cm3时,激光器实现了2.6%的激光效率和3.8%的本征效率。     

光纤放大器中的受激布里渊散射阈值

 从受激布里渊散射(SBS)耦合波理论出发,根据双包层光纤放大器中的受激布里渊散射阈值模型,理论仿真了信号带宽、纤芯直径、放大器增益对SBS阈值的影响,并从实验上研究了单频百纳秒脉冲信号在掺镱双包层光纤放大器中的受激布里渊散射现象。实验中输入脉冲信号重复频率1 Hz,脉宽200 ns,对不同的输入脉冲信号放大,前向放大脉冲在脉冲能量660 nJ、峰值功率3.3 W时出现畸变,产生后向SBS窄脉冲,达到了SBS阈值,实验计算的SBS阈值与理论分析结果基本一致。     

细线径螺旋线长脉冲产生技术

提出了双路输出的螺旋脉冲形成线(PFL)结构,该结构内置用于充电的高耦合变压器,在螺旋PFL的两端各自输出一个脉冲,副路匹配输出时主路输出脉冲波形具有良好的平顶品质,主路输出脉冲能量占储能的大部分,解决了Korovin提出的螺旋PFL充电问题。对比分析双路输出的螺旋 PFL与SINUS-700/130两种技术路线,结果发现双路输出的螺旋 PFL改善了输出脉冲的平顶质量,输出功率提高29%,但是副路输出占用11%的储能,不易充分利用。