Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography

In the present paper, two new methods, sol-gel and chemical bonding methods, were proposed for preparation of sulfonated fused-silica capillaries. In the sol-gel method, a fused-silica capillary was coated with the sol solution obtained by hydrolysis of 3-mercaptopropyltrimethoxysilane (MPTS) and tetramethoxysilane, and followed by age; while in the chemical bonding method, a capillary was chemically bonded directly with MPTS. Then, both the resulting capillaries were oxidized with an aqueous solution of hydrogen peroxide solution (H2O2) (30%, m/m) to obtain the sulfonated capillaries. The electroosmotic flow (EOF) for the sulfonated capillaries was found to remain almost constant within the studied pH range, and greater than that of the uncoated capillary. However, the coating efficiency of the capillary prepared by chemical bonding method was higher than that by sol-gel method, by comparing their magnitude of the EOF, the degree of disguise of the silanol and reproducibility of preparation procedure. The effects of the electrolyte's concentration and the content of methanol (MeOH) on the EOF were also studied. Especially, the study of the apparent pH (pH*) on the EOF in a water-MeOH system was reported. Finally, capillary electrophoretic separation of seven organic acids was achieved within 6.5 min under optimal condition using the chemically bonded sulfonated capillary. Moreover, separation of four alkaloids on the sulfonated capillary was compared with that on uncoated capillary in different conditions. Ion-exchange mechanism was found to play a key role for separation of these four basic analytes on the sulfonated capillary.     

Astragalus membranaceus ultrafine powder alleviates hyperuricemia by regulating the gut microbiome and reversing bile acid and adrenal hormone biosynthesis dysregulation

Ethnopharmacological relevanceMetabolic syndrome is closely related to the intestinal microbiota and disturbances in the host metabolome. Hyperuricemia (HUA), a manifestation of metabolic syndrome, can induce various cardiovascular diseases and gout, seriously affecting a patient’s quality of life. Astragalus membranaceus has a long history as a commonly used traditional Chinese medicine to treat kidney disease in China and East Asia.Materials and methodsWe compared the therapeutic effect of benzbromarone and two different doses Astragalus membranaceus ultrafine powder (AMUP) in rats with HUA. Ultra-performance liquid chromatography-mass spectrometer was used to analyze the AMUP metabolism in the plasma, urine, and feces. Further, 16S ribosome RNA sequencing and feces metabolomic were performed to capture the variation of the gut microbiota and metabolites changes before and after drug administration.ResultsAMUP had a notable impact on reducing blood uric acid levels while protecting the liver and kidney. Drug metabolism analysis demonstrated that effective constituent flavonoids are distributed in the blood, whereas saponins remain in the intestine. Gut microbiota analysis showed that low-dose AMUP ameliorated HUA-induced gut dysbiosis by reducing the abundance of harmful bacteria and increasing that of some beneficial bacteria with anti-inflammatory properties, such as Clostridia, Lachnospiraceae, and Muribaculaceae. In addition, HUA-induced changes in metabolite contents in bile acid and adrenal hormone biosynthesis pathways were restored after treatment with AMUP.ConclusionLow-dose AMUP exerts remarkable therapeutic effects on HUA by regulating the gut microbiome and mediating gut metabolism pathways associated with uric acid excretion.     

双(1,3-二硫杂环戊烯-2-硒酮-4,5-二硫)金属配合物的合成及其电化学性质的研究

以1，3-二硫杂环戊烯-2-硒酮-4，5-二硫盐为配体与二价金属离子配位合成了4种双(1，3-二硫杂环戊烯-2-硒酮-4，5-二硫)金属配合物，研究了它们的电化学性质和UV—Vis光谱，并讨论了形成中性产物的原因。     

Brightness Reversion of Mechanical Pulps. Part XVII: Diffuse Reflectance Study on Brightness Stabilization by Additives Under Various Atmospheres

Brightness reversion of softwood (SW) and hardwood (HW) bleached chemithermomechanical pulps (BCTMP) with a 300–400nm light source under argon, oxygen, and air were studied in the absence and presence of UV-screens using UV–Vis reflectance difference spectroscopy. The UV-Vis difference absorption spectra of control SW and HW BCTMP testsheets indicate that as the concentration of atmospheric oxygen is increased, the absorption at max 360nm increases and a blue shift occurs. In all of the cases studied, brightness reversion was observed to occur under an argon atmosphere. The addition of benzophenone and benzotriazole additives to BCTMP testsheets resulted in a significant decrease in formation of chromophores absorbed at 400nm and 360nm. The possible mechanisms contributing to these effects are discussed in terms of the photoformation of lignin chromophoric structures.     

Spectrochemical Properties of Noncubical Transition Metal Complexes in Solution. XII. Angular Overlap Studies of Salicylideneethylenediamine Cu(II) Complex in Various Solvents

As a part of our general interest in the UV-Vis spectroscopy of multidentate mixed-donor ligands, the (salicylideneethylenediamine)Cu(II) complex has been prepared and characterized by elemental analyses, solubility in common solvents, molar conductivities, and ultraviolet (UV), and visible (Vis) spectroscopy. The combined results of spectrophotometric measurements and EPR spectra, as well as known the X-ray structure for solids, were used to determine the structure of the investigated complex in solutions. The spectra of [Cu(salen)] (H₂salen = salicylideneethylenediamine), were measured in various solvents at room temperature, resolved by Gaussian analysis, and angular overlap model (AOM) treated in C _2v symmetry. Because of overparametrization problems, the bis(salicylaldehyde)Cu(II) complex has been characterized and AOM treated. The results of this have been used for AOM studies of [Cu(salen)]. The effect of the solvents upon the - and -bonding ligand abilities is discussed.     

Dimethyl carbonate as a novel methylating reagent for fatty acids in analytical pyrolysis

Dimethyl carbonate (DMC) was investigated as a mild, harmless and odorless reagent for pyrolytic methylation of fatty acids. Soybean oil was selected as test material for its high content of (poly)unsaturated fatty acids. Pyrolyses were performed at 500, 700 and 900 degrees C by means of a heated platinum filament pyrolyser on-line and off-line to the GC-MS apparatus. Methyl esters of palmitic, linoleic, oleic and stearic acid were formed as prominent products from off-line pyrolysis of soybean oil in the presence of DMC and zeolite 13X. Fatty acid methyl esters (FAMEs) were not observed at important levels in the absence of zeolite, while on-line Py-GC-MS experiments resulted principally in the formation of free fatty acids and hydrocarbons. The FAME profiles obtained from the DMC/zeolite off-line pyrolysis were compared to those resulting from tetramethylammonium hydroxide (TMAH) thermochemolysis and BF3-methanol procedure. The observed differences between pyrolysis and methanolysis methods were principally attributed to the thermal degradation of unsaturated fatty acids. The effectiveness of the DMC/zeolite pyrolytic methylation was further demonstrated by the analysis of tripalmitine and soybean seeds.     

Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

Electrochemical studies of the oxidation mechanism of polyamide on glassy carbon electrode

Polyamides containing N-methyl pyrroles and N-methyl imidazoles are a type of small molecule that can bind and recognize the bases of DNA with high affinity and specificity. Five polyamides were studied at glassy carbon electrode in acetate buffer by cyclic and differential pulse voltammetry to clarify their redox pathways. The polyamide electrochemical responses are compared by peak currents and peak potentials. The slopes of the three anodic E_p vs. pH plots of a typical polyamide are linear and show 0.059, 0.057, 0.056 V per pH in acid media, respectively, which correspond to a mechanism involving the equal number of electrons and protons. A possible mechanism for the redox pathway of various polyamides is proposed: the oxidation product of imidazole ring is acylamide and the results of in situ UV–Vis spectroscopy at Pt web electrode support the proposed mechanism. electrospray ionization mass spectroscopy (ESI-MS) indicates that one or two oxygen atoms are added into polyamide molecule after electrochemical oxidation.