On the Buchstaber Subring in MS p

A formula is given to calculate the last n number of symplectic characteristic classes of the tensor product of the vector Spin(3)- and Sp(n)-bundles through its first 2n number of characteristic classes and through characteristic classes of Sp(n)-bundle. An application of this formula is given in symplectic cobordisms and in rings of symplectic cobordisms of generalized quaternion groups.     

Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.     

高速电视摄象系统的象质评价和动态计测精度

本文对高速摄象系统(包括电视摄象系统和光机式摄象系统)的象质评价方法予以讨论,并用实验方法对目前广泛使用的Kodak SP-2000、NAC HSV-200等高速电视摄象系统及我们自己开发的一维扫描电视摄象系统的象质,在新的定义下给出了评价,对它们的动态精度作了对比性测试,同时和光机式高速摄象系统作了比较。     

A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Interactions between kinetic and radiative processes inside moving absorbing fluids

The aim of this paper is to present several features of the couplings occurring between radiative transfer and the kinetics of a moving dielectric. After determining how the velocity field affects the apparent thermo-optical properties of matter, the energy transport problem is investigated in instationary regime and the general form of transient radiative transfer equation inside a moving medium is built. Then, the model is applied to the particular case of turbulent flows: a system of two equations for mean and fluctuating radiative energies is presented, and the resolution of this system is finally carried out.     

Zeroth and second laws of thermodynamics simultaneously questioned in the quantum microworld

A new and rather trivial model is suggested with mechanism that implies simultaneous violation of the zeroth and the second laws of thermodynamics. Mathematically rigorous quantum theory reduces to a trivial application of the Golden rule formula. It yields exciton on-energy-shell diffusion caused by bath-nonassisted excitation hopping between tails of different exciton site levels ε₁ < ε₂ broadened by bath-assisted finite life-time effects. The elastic character of the hopping implies 1 ↔ 2-symmetric transfer rate W. Thus the net diffusion exciton flow W(P ₁ - P ₂) and also, as argued, the net energy flow are possible due to different near-to-equilibrium exciton populations P ₁ > P ₂. As the sites are provided with two different baths, the population imbalance and the flows survive even for slightly different local bath temperatures T ₁ < T ₂ < T ₁ε₂/ε₁. Thus spontaneous exciton and also energy flows against temperature step become possible, in contradiction with the Clausius form of the second law. Violations of both the laws disappear in the high-temperature, i.e. classical limit Received 16 May 2001 and Received in final form 20 September 2001