Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.     

SiO2/炭泡沫和SiC/炭泡沫复合材料的制备及表征

对炭泡沫为支撑骨架的氧化硅气凝胶(SiO₂/炭泡沫)和碳化硅(SiC/炭泡沫)复合材料分别采用XRD、SEM、激光导热仪、万能力学试验机进行物相、微观结构、热学及力学性能方面的表征.结果表明:所制备的SiO₂/炭泡沫与原炭泡沫相比,具备更高的抗压强度(14.95 MPa)和更低的室温热导率(0.44 W·m^-1·K^-1).SiC/炭泡沫材料则保持了较高的抗压强度值(14.66 MPa),其在 1 200 ℃下具备极低的高温热导率(2.18W·m^-1·K^-1).热重分析表明,SiC/炭泡沫在氧化氛围中到610 ℃才发生质量的损失,而内部炭发生完全烧蚀的温度高达844 ℃,这表明该材料的抗氧化性能远好于纯的炭泡沫材料.     

Improved Photovoltaic Performance of MEH-PPV/PCBM Solar Cells via Incorporation of Si Nanocrystals

We have studied the effect of silicon nanocrystals （SiNCs） as a third component on performance of organic bulk heterojunction solar cells composed of poly[2-methoxy,5-（2＇-ethylhexyloxy）-l,4-phenylene vinylene] （MEH- PPV）：[6,6]-phenyI-C61-butyric acid methyl ester （PCBM） blend film. By adding suitable amounts of SiNCs into MEH-PPV：PCBM blend, the device performance such as external quantum efficiency, short circuit current density （Js（）, and power conversion efficiency （PCE） improved. Incorporation of 2.5% SiNCs in the blend led to 13.6% improvement of Jsc, which in turn resulted in 18% improvement of PCE up to 2.28%. The improved performance was mainly due to the improvements both in the charge generation from the interface of MEH-PPV/SiNCs and the charge collection at the cathode.     

Novel,Mild, and Highly Efficient Method for the Synthesis of 2-Arylbenzothiazoles by the Oxidation of 2-Arylbenzothiazolines with Silicon Lewis Acids

Oxidation of structurally diverse 2-arylbenzothiazolines to give the corresponding 2-arylbenzothiazoles has been carried out in benzene using dimethyldichlorosilane and trimethylchlorosilane. Short reaction times, mild reaction conditions, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure.     

Enantioselective Morita–Baylis–Hillman reaction catalyzed by a chiral phosphine oxide

An application of a hypervalent silicon complex, generated from a chiral phosphine oxide catalyst and silicon tetrachloride, to the enantioselective organocatalytic Morita–Baylis–Hillman reaction is described. A chloride anion liberated from the hypervalent silicon complex smoothly generated a γ-chloro silyl enol ether that subsequently reacted with an aldehyde to afford the Baylis–Hillman adducts in good yields and with good enantioselectivities.     

Regular arrays of triangular‐microstructure formed on silicon (111) surface via ultrafast laser irradiation in KOH solution

The regular micrometer‐scale triangular arrays were formed using ultrafast femtosecond laser irradiation on (111) surface of silicon wafer immersed in KOH solution (0.1 g/ml). At low laser fluence, the resulting surface is covered by triangular pits microstructures, whereas at high laser fluence, the structures are transformed to multilayer‐triangular stacks‐microstructures. The number of triangular stacks layer increased as the laser fluence increased. The formation of triangle microstructure arrays depends on both silicon surface crystallographic orientation and the concentration of KOH solution. Either for lower KOH solution concentration (0.02 g/ml) or other silicon crystallographic orientation, triangle arrays cannot be obtained. We attribute the formation of triangular microstructure arrays to the laser‐assisted chemical etching process. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method

In this work, an all the way green analytical procedure based on a silicon oxide film-solid phase extraction system is proposed for lead traces determination. From the synthesis of a solid phase extraction (SPE) system and throughout the metal preconcentration and determination only aqueous media were employed. Characterisation of the film was carried out by Scanning Electron Microscopy and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Preconcentration conditions, prior to Pb(II) Electrothermal Atomic Absorption Spectrometry (ETAAS) determination, such as adsorption and desorption time, pH and temperature, were optimised. Langmuir, Freundlich and Dubinin-Radushkevich isotherm models were analysed along with the evaluation of adsorption energy and standard free energy (ΔG ⁰). The greatest adsorption was obtained with incubation at pH 7 and 37°C. By using a small volume of 0.5?mol?L^?1 HNO₃ (0.5?mL) lead was desorbed from the silicon oxide film after 2?h incubation, generating low amount of waste. The films showed better adjustment for the Langmuir model (R^{2 ?}=?0.989). The detection limit (3.29σ) for Pb(II) was 0.228?µg?L^?1. The developed procedure is 10-fold more sensitive in comparison to direct ETAAS determination. Recovery values from soft tap-water and soft well-water were above 95%. When hard water was analysed, Pb(II) adsorption was found to be interfered by Mg²⁺ and Ca²⁺. After five preconcentration cycles relative recovery was found not to decay below 90%, indicating that the silicon oxide film could be used for multiple lead determinations.     

A Silyliumylidene Cation Stabilized by an Amidinate Ligand and 4‐Dimethylaminopyridine

The synthesis and reactivity of a silyliumylidene cation stabilized by an amidinate ligand and 4‐dimethylaminopyridine (DMAP) are described. The reaction of the amidinate silicon(I) dimer [ L Si:]₂ ( 1 ; L =PhC(NtBu)₂) with one equivalent of N‐trimethylsilyl‐4‐dimethylaminopyridinium triflate [4‐NMe₂C₅H₄NSiMe₃]OTf and two equivalents of DMAP in THF afforded [ L Si(DMAP)]OTf ( 2 ). The ambiphilic character of 2 is demonstrated from its reactivity. Treatment of 2 with 1 in THF afforded the disilylenylsilylium triflate [ L′ ₂( L )Si]OTf ( 3 ; L′ = L Si:) with the displacement of DMAP. The reaction of 2 with [K{HB(iBu)₃}] and elemental sulfur in THF afforded the silylsilylene [ L SiSi(H){(NtBu)₂C(H)Ph}] ( 4 ) and the base‐stabilized silanethionium triflate [ L Si(S)DMAP]OTf ( 5 ), respectively. Compounds 2 , 3 , and 5 have been characterized by X‐ray crystallography.