Metal Ion Guest Responsive Benzoxazine Dimers and Inclusion Phenomena of Cyclic Derivatives

This study was carried out with the aim to optimize the dissolution propertiesof diclofenac (DIC) – a non-steroidal anti-inflammatory drug sparingly solublein water – through association -with -cyclodextrin (CD). Theeffect of CD on the aqueous solubility of DIC was evaluated by thephase solubility method. The amount of DIC dissolved increased linearly withthe addition of CD according to an AL type plot and without precipitationof the complex. The apparent stability constant of the complex, calculated supposinga 1:1 stoichiometry, was 295 M^-1; this value was confirmed by circulardichroism analysis. DIC/CD interactions were also studied in water by¹H and ¹³C NMR spectroscopy. Equimolar DIC/CD solid systems were prepared by physical-mixing, kneading, co-evaporation andfreeze-drying, and their properties in the solid state studied by DifferentialScanning Calorimetry, X-ray powder diffractometry and Fourier-TransformInfrared analysis. For sake of comparison, the mixture of DIC and CDseparately lyophilized was investigated too. The results demonstrated that thefreeze-dried product had the highest degree of amorphization and they were inagreement with the existence of an inclusion complex in the solid state. Thedissolution profiles of the drug from each solid system were affected by its physico-chemical properties, the freeze-dried being the most rapidly dissolvingforms.     

The influence of the mercury and thallium atoms in organomercury and organothallium nitroxyl radicals on their reactivity

An increase is found in the reactivity of organomercury and organothallium nitroxyl mono- and biradicals of the imidazoline type in comparison with the analogous compounds without organometallic fragments. This is explained by the formation of coordination bonds NHg, NTl, and NOHg.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 224–226, January, 1993.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Advanced kinetic tools for the evaluation of decomposition reactions

Summary An advanced kinetic study on the thermal behaviour of pyrotechnic ignition mixtures has been carried out by differential scanning calorimetry using different B/KNO3 mixtures (50:50, 30:70, 20:80) as a model reaction. The experimental conditions applied (isochoric conditions/closed crucibles and isobaric conditions/open crucibles) as well as the composition of the mixtures noticeably influences the relative thermal stabilities of the energetic materials. The kinetic study focused on the prediction of the thermal stability of the different mixtures both in extended temperature ranges and under temperature conditions at which ordinary investigation would be very difficult. Using advanced numerical tools [1], thermal ageing and influence of the complex thermal environment on the heat accumulation conditions were computed. This can be done for any surrounding temperature profile such as isothermal, non-isothermal, stepwise, modulated, shock, adiabatic conditions and additionally for temperature profiles reflecting real atmospheric temperature changes (yearly temperature profiles of different climates with daily minimal and maximal fluctuations). Applications of accurate decomposition kinetics enabled the determination of the time to maximum rate under adiabatic conditions (TMR_ad) with a precision given by the confidence interval of the predictions. This analysis can then be applied for the examination of the effects of the surrounding temperature for safe storage or transportation conditions (e.g. determination of the safe transport or storage temperatures).     

Surface transient effects in ultralow‐energy Cs+ sputtering of Si

This study examines the dependence of the sputter rate and the transient width (z_tr) as a function of Cs⁺ primary ion energy (impact energy (E_p) = 320 eV, 500 eV and 1 keV) and incident angles between 0 and 70° . The instrument used was the ATOMIKA 4500 SIMS depth profiler and the sample was Si with ten delta layers of Si_0.7 Ge_0.3. We observed the narrowest transient widths of between 1.4 and 2.0 nm apparent depth. This was achieved at incident angles (θ) of 30–50° . An extended transient effect was observed when profiled at θ > 50° . Below this incident angle, the transient width is less than twice the penetration depth (z_tr < 2R_norm). At minimum z_tr, z_tr ≈ R_norm. The detection sensitivity is best achieved at θ ≈ 30° for all energies investigated. The sputter rate is lowest at normal incidence, rising gradually to a maximum at θ ≈ 50–60° . This is similar to that observed with ultralow‐energy O₂⁺ primary ion beams. 1 At ultralow energies, reducing E_p does not have a significant effect in reducing z_tr. We conclude that for E_p < 1 keV, the optimum condition to achieve minimum z_tr while maintaining good sensitivity and high sputter rate is at θ ≈ 30° . Copyright © 2007 John Wiley & Sons, Ltd.     

计及位置不确定的喷雾机喷杆系统仿形姿态渐近跟踪控制北大核心CSCD

针对喷雾机喷杆仿形系统中同时存在负载变化、未建模不确定项、物理参数摄动以及外部干扰等问题,提出了一种基于小波网络逼近的具有自适应性和鲁棒性的反步控制方法.首先,将含有不确定、未知和非线性项的喷杆仿形系统建立为完整的数学模型,将其等价转化为具有严格反馈的状态空间形式;其次,采用设计的小波基元去构造神经网络,在满足最优误差有界条件下逼近反步法中虚拟等效控制部分,选取自适应更新律估计系统中存在的未知参数,引入鲁棒补偿项减小复合干扰对系统的不利影响,降低了输入指令信号的阶次要求;最后,通过构造合适的Lyapunov函数,应用稳定性理论证明了闭环系统位置跟踪误差渐近收敛到原点.仿真结果表明,所提控制方法可实现喷雾机喷杆位置姿态快速升降机动调整,有效地增强了喷杆系统的鲁棒稳定性和控制精度.     

Parameter choice by discrepancy principles for ill-posed problems leading to optimal convergence rates

Schock (Ref. 1) considered a general a posteriori parameter choice strategy for the Tikhonov regularization of the ill-posed operator equationTx=y which provides nearly the optimal rate of convergence if the minimal-norm least-squares solution belongs to the range of the operator (T ^* T) ^v , o<v1. Recently, Nair (Ref. 2) improved the result of Schock and also provided the optimal rate ifv=1. In this note, we further improve the result and show in particular that the optimal rate can be achieved for 1/2v1.The final version of this work was written while M. T. Nair was a Visiting Fellow at the Centre for Mathematics and Its Applications, Australian National University, Canberra, Australia. The work of S. George was supported by a Senior Research Fellowship from CSIR, India.     

Exponential distributions on semigroups

Three fundamental characterizations of the standard exponential distribution on [0, ) are the remaining life, memoryless and constant failure properties. Analogs of these properties are studied for distributions on a class of semigroups in which the semigroup operation replaces addition, a compatible partial order replaces the ordinary order, and a left-invariant measure replaces Lebesgue measure. Partial characterizations of exponential distributions on such semigroups are obtained and the semigroup formulation provides new characterizations of certain aging properties studied in reliability-increasing failure rate, new better than used, and increasing failure rate average.