Characteristics of Subtractive Anodic Stripping Voltammetry of Lead,Cadmium and Thallium at Silver‐Gold Alloy Electrodes

Silver‐gold alloy electrodes have been studied for the purpose of the quantitative determination of heavy metals by subtractive anodic stripping voltammetry, (SASV). The results have been compared with those obtained with the silver and gold electrodes. The 50/50 a/o Ag/Au alloy electrode is the most suitable for quantifying thallium in the presence of lead and cadmium. The separation of its peak from those of lead and cadmium is 200 mV, which is about twice the separation obtained on the pure metal electrodes and is also better than on mercury. The silver electrode is suitable for the simultaneous determination of thallium, lead and cadmium. The peaks of lead and cadmium overlap on the 50/50 alloy. Pure silver or pure gold can be used for simultaneous quantification of these two metals. The use of gold for quantifying lead and cadmium is more limited because the peak potential of cadmium is shifted in the negative direction as its concentration increases and at [Cd²⁺]>200 nM, the two peaks merge. SASV enables correction for background currents and is of utmost importance for obtaining well‐defined peaks. The peaks of lead, cadmium and thallium appear over a relatively narrow potential range (ca. 200 mV) on all the electrodes presented in this work. For this reason, the quantifying of a peak is based on the derivative at the inflection point of only one of its branches (ascending or descending). All SASV measurements were carried out without removal of oxygen.     

Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.     

Preparation of nanometer FeCuP alloy and its application in decomposition of PH3

A new ternary Fe-based alloy catalyst FeCuP applied to decompose PH_3 was prepared with low-cost material by chemical reduction deposition method.The properties of it were characterized by XRD,ICP and SEM.Its catalytic activity on the decomposition of PH_3 and the decomposition conditions were studied.FeCuP alloy exhibits high thermal stabilities and high catalytic activity.Using it as catalyst,the decomposition temperature of phosphine decreases from over 800℃to 400-500℃.The decomposition rate of phosphine achieved 100%.     

Electrodeposition of a cobalt-molybdenum alloy from an ammonia-citrate electrolyte

Kinetics of processes of electrochemical production of a cobalt-molybdenum alloy out of an ammonia-citrate electrolyte is studied. The electrolyte’s composition is similar to that used for depositing a nickel-molybdenum alloy. It is established that the cobalt-molybdenum alloy undergoes deposition at smaller values of pH (5.0–6.0) than the nickel-molybdenum alloy (7.0–9.0). The current efficiency for the cobalt-molybdenum alloy is substantially dependent on the electrolyte pH, whereas the chemical composition of the obtained deposits is practically independent of the electrolyte pH in the pH interval 5.0–8.0 at current densities of 0.025 to 0.100 A cm^?2. On the other hand, a change in the electrolyte pH produces a considerable effect on the morphology of the obtained deposits. At large values of pH (pH 8.0), one can obtain a powder-like deposit of the cobalt-molybdenum alloy with a small value of the current efficiency. The deposits that are obtained in the pH region 5.0–6.0 have some cracks, with the number of cracks increasing with the electrolyte pH.     

高砷低金银的铅阳极泥中银的冶炼

本文报导了将纯碱加入砷含量高的铅阳极泥熔炼成贵铅，用硝酸溶解，硫氰酸盐沉淀，再用锌粉还原得银的方法。从而避免砒霜挥发。     

Use of the molybdenum-thiocyanate-rhodamine 6G ternary complex for spectrophotometric molybdenum determination without extraction

A modified thiocyanate method without extraction by using rhodamine 6G as a secondary ligand was developed. Molybdenum in 1.0×10⁻² M HCl, after the addition of ascorbic acid, was heated for 10 min in a 90 °C water bath for reduction. Suitable amounts of glycerine, Triton X-100, rhodamine 6G solutions and 2+1 (v/v) 9 M H₂SO₄+3 M KHSO₄ were added in this order. This solution was allowed to cool to room temperature and the absorbance at 570 nm was measured against a reagent blank 45 min after the addition of thiocyanate solution and the second aliquot of Triton X-100 solution. The complex was stable for at least 4 h, the order of reagent addition was important, and thiocyanate should be in large excess. Beer’s law was obeyed over the range 0.9×10⁻⁶ to 1.1×10⁻⁵ M Mo with the molar absorptivity being 1.1×10⁵ l mol⁻¹ cm⁻¹. The R.S.D. for the determination of 0.7 mg Mo l⁻¹ was 1.83% (n=8). Possible interferences of various cations and anions on molybdenum determination were studied. The proposed method was applied to the determination of molybdenum in a dental alloy, Wiron 99.     

离子交换树脂负载Ni—B无定形合金催化剂的制备与性能

制备了一种新型离子交换树脂负载的Ｎｉ－Ｂ无定形合金催化剂．用３种树脂作为催化剂载体，即弱酸型阳离子树脂Ｄ１５２，强酸型阳离子树脂Ｄ７２及强碱型阴离子树脂Ｄ２６１．用ＸＰＳ、ＴＥＭ和ＩＣＰ等技术对催化剂进行了表征．结果表明，催化剂上镍与带有功能基的载体树脂之间有着很强的相互作用，但其强度与所带的功能基有关．３种催化剂Ｎｉ２ｐ３／２的ＸＰＳ谱图上，ＮｉＢ／Ｄ１５２催化剂的氧化态峰最小，而ＮｉＢ／Ｄ２６１的氧化态峰最大．异丙醇脱氢反应活性实验证实了这一结果．     

Adsorption of n-Butanol from Aqueous Solutions on a Bi–Ga Electrode

Curves of the differential capacitance at the Bi–Ga/H₂O interface in 0.05 M Na₂SO₄ solutions with different concentrations of n-C₄H₉OH are obtained by a bridge method at 420 Hz and 32°C. Adsorption parameters of n-C₄H₉OH, determined by a regression analysis of these curves, are compared with relevant data for mercury and partially fused polycrystalline bismuth (pBi). That the adsorption behavior of organic molecules at Hg differs from that at pBi and Bi–Ga is due not to their different hydrophilicity but to a different physical interaction water–electrode. The reason for this phenomenon can be an unequal spread of electron density beyond the ionic cores of Hg and Bi. These notions are corroborated by the fact that the Bi–Ga data fit overall correlation dependence between the electronic capacitance of different electrodes in the absence of a chemisorption interaction metal–water and the adsorbability of the n-C₄H₉OH molecules on them.     

Characterization of chromate conversion coating on AA7075‐T6 aluminum alloy

Chromate conversion coatings (CCCs) on AA7075‐T6 were characterized using scanning electron microscopy, focused ion beam sectioning and scanning transmission electron microscopy with nano‐electron dispersive spectroscopy line profiling. The thickness and composition of the CCC was different at different locations on the heterogeneous microstructure of AA7075‐T6. The coating formed on the matrix phase was much thicker than that formed on the coarse Al–Cu–Mg, Al–Fe–Cu and Mg–Si intermetallic particles. Nano‐electron dispersive spectroscopy line profiling indicated that the coating on the Al–Fe–Cu particles was similar to the CCC formed on the phase matrix, primarily a chromium oxide. However, the coatings on the Al–Cu–Mg and Mg–Si particles were mixed Al/Mg/Cr oxide and Mg oxide, respectively. The growth of CCC followed a linear‐logarithmic kinetic rate law. The observations of this study support the sol‐gel model of CCC formation. Copyright © 2004 John Wiley & Sons, Ltd.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.