A comparative study on the single-scan and multiple-scan techniques in differential scanning calorimetry: Application to the crystallization of the semiconducting Ge0.13Sb0.23Se0.64 alloy

A method has been developed for analysing the evolution with time of the volume fraction transformed and for calculating the kinetic parameters at non-isothermal reactions in materials involving formation and growth of nuclei. By considering the assumptions of extended volume and random nucleation, a general expression of the fraction transformed as a function of time has been obtained in isothermal crystallization processes. Considering the mutual interference of regions growing from separate nuclei the Johnson–Mehl–Avrami equation has been deduced as a particular case. The application of the transformation rate equation to the non-isothermal processes has been carried out under the restriction of a nucleation which takes place early in the transformation and the nucleation frequency is zero thereafter. Under these conditions, the kinetic parameters have been deduced by using the techniques of data analysis of single-scan and multiple-scan. The theoretical method developed has been applied to the glass-crystal transformation kinetics of the semiconducting Ge_0.13Sb_0.23Se_0.64 alloy. The kinetic parameters obtained according to both techniques differ by only about 2.5%, which confirms the reliability and accuracy of the single-scan technique when calculating the above-mentioned parameters in non-isothermal transformation processes. The phases at which the above-mentioned semiconducting glass crystallizes after the thermal process have been identified by X-ray diffraction. The diffractogram of the transformed material shows that microcrystallites of Sb₂Se₃ and GeSe are associated with the crystallization process, remaining a residual amorphous matrix.     

Electrocatalysis of Nitrate Reduction at Copper‐Nickel Alloy Electrodes in Acidic Media

The cathodic reduction of NO in 1.0 M HClO₄ is investigated by voltammetry at pure Ni and Cu electrodes, and three Cu‐Ni alloy electrodes of varying composition, all configured as rotated disks. Voltammetric data obtained using these hydrodynamic electrodes demonstrate significantly improved activity for NO reduction at Cu‐Ni alloy electrodes as compared to the pure Ni and Cu electrodes. This observation is explained on the basis of the synergistic benefit of different surface sites for adsorption of H‐atoms, generated by cathodic discharge of H⁺ at Ni‐sites, and adsorption of NO at Cu‐sites on these binary alloy electrodes. Koutecky‐Levich plots indicate that the cathodic response for NO at a Cu₇₅Ni₂₅ electrode corresponds to an 8‐electron reduction, which is consistent with production of NH₃. In comparison, the cathodic response at Cu₅₀Ni₅₀ and Cu₂₅Ni₇₅ electrodes corresponds to a 6‐electron reduction, which is consistent with production of NH₂OH. Flow injection data obtained using Cu₅₀Ni₅₀ and Cu₂₅Ni₇₅ electrodes with 100‐μL injections exhibit detection limits for NO of ca. 0.95 μM (ca. 95 pmol) and 0.60 μM (ca. 60 pmol), respectively.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.     

Electrochemical characterization of Ni–Fe alloy codeposition under MHD control

The nickel–iron alloy electrodeposition is affected by a superimposed magnetic field. Some previous papers [Msellak et al., Magnetohydrodynamics, 39:487–493, 2003 and Msellak et al., J Magn Magn Mat, 281:295–304, 2004] have exhibited some dramatic changes in iron amount and morphology of these deposits. As it is usual for a magnetic field up to 1 T, no charge transfer effect can be expected, and the observed modifications can be explained by the magnetohydrodynamic convection that controls the iron species flux during the electrochemical reaction. By electrochemical impedance spectroscopy and physical investigations (scanning electron microscopy, X-ray diffraction, and inductively coupled plasma), the reduction process is analyzed, the characteristic parameters of the mechanism are determined, and the magnetic field effects can be quantified. Contribution to special issue on “Magnetic field effects in Electrochemistry”.     

激光沉积修复BT20合金的显微组织和力学性能

针对BT20钛合金锻件当量孔损伤进行激光沉积修复试验,考察了修复试样的组织和力学特点。修复区与基材之间形成了致密冶金结合,Al,Zr,Mo,V合金元素由锻件基体到激光修复区均匀分布,无宏观偏析,硬度分布从基材到修复区依次提高。热影响区组织是由基材的双态组织过渡到网篮组织;修复区组织为粗大的原始柱状晶,晶粒内为/网篮组织,晶内片层取向随机, 宽0.4~0.5 m。修复过程中发现,激光加工工艺参数选择不当、坡度过大等原因会造成修复区组织形成气孔和熔合不良等缺陷,但是通过优化工艺参数可以获得无缺陷修复试样。修复试样的室温静拉伸结果表明,试样的抗拉强度接近锻件基体强度,但修复件的韧性比锻件稍有提高。     

激光诱导AZ31B镁合金薄板动态响应实验研究

为分析在激光冲击波作用下AZ31B镁合金薄板背面的动态响应,采用聚偏氟乙烯贴片传感器与数字示波器对强激光诱导的冲击波进行测量,得到压电波形,结合冲击波的传播特性,对弹塑性双波的传播规律进行了研究。结果表明：激光诱导的材料动态响应是快速的;压电波形图反映出的弹性前驱波与塑性加载波传播到靶材背面的时间与理论时间相符;弹性前驱波能量小引发的波形振幅较小,紧随着的塑性加载波能量大并引起较大振幅波动,弹塑性双波卸载过程与紧接着的加载过程导致了压电信号的波动振幅提高。     

超细Ni80Cr20合金丝的冷拉拔制备及表征

开展特定直径超细Ni80Cr20合金丝的冷拉拔制备研究,并通过扫描电子显微镜（SEM）、X射线衍射仪（XRD）和金属丝强力仪等对超细合金丝进行了表征。研究结果表明：烧头过程最佳电解液浓度为0.05 mol/L,时间为3 s;制备的镍铬合金丝直径为24.54 m,表面光滑,尺寸精准;拉拔后晶粒尺寸减小,退火后晶粒尺寸长大;拉拔态镍铬丝由于加工硬化,其伸长率由16%降低至1.88%;退火可改善镍铬丝性能,其断裂强度降低,伸长率增大,合金塑性增强,氮气退火丝的断裂强度大于真空退火丝的断裂强度,伸长率则相反。