YBCO涂层导体用Ni5W基带的制备和立方织构的发展

为了制作能满足YBCO涂层导体（coated conductor）所需要的高强度、低磁性的立方织构基带，本工作用粉末冶金方法制作了Ni-5at％W合金基带．为评估基带中立方织构的发展，用March-Dollase函数对各种热处理样品的择优取向度进行了研究，结果与用X射线极图法和电子背散射衍射法得到的结果基本一致．研究结果表明，在实验中所用的工艺参数范围内，随总加工率和热处理温度的提高，基带中立方织构百分数明显增高．提高总加工率实际增加了冷加工样品中立方织构晶粒或立方核心的数量．实验中得到了较好的和实用的工艺制度，用这种工艺可以制作出具有99％～100％立方织构百分数，并具有很好一致取向度的Ni5W基带．     

两相钛合金再结晶退火组织与织构演变的蒙特卡罗模拟

蒙特卡罗(MC)方法被广泛应用于模拟金属材料在退火过程中的静态再结晶行为. 在已有两相材料晶粒长大MC模型基础上, 引入形核阶段, 综合考虑再结晶晶粒吞并形变晶粒和再结晶晶粒竞争长大两种情况, 建立了退火时两相合金再结晶MC模型.结合电子背散射衍射所测 初始晶粒形貌、相成分、晶体学取向及应变储能相对值, 该模型被应用于TC11钛合金退火过程中的微观组织及织构演变模拟.结果表明, 所建模型能够较好体现退火过程中两相晶粒的形核及晶粒长大行为. 与β相相比较, α相具有较低的再结晶速率和较高的晶粒长大速率, 前者主要归结于α相较低的初始应变储能, 后者则体现了该条件下初始组织形貌、分布及两相比例对晶粒长大具有重要影响; 由于非均匀形核的影响, 模拟得到的再结晶速率变化与 假设均匀形核的Johnson-Mehl-Avrami-Kolmogorov 再结晶方程存在明显差异.同时, 两相的基本织构特征在退火过程中无明显变化, 但织构强度增加. 关键词： 两相钛合金 再结晶 蒙特卡罗方法 织构     

第一性原理研究Hg2CuTi型Heusler合金Ti2FeB的磁性和半金属性

基于密度泛函理论的GGA计算,我们具体研究了Hg2 CuTi型Heusler合金Ti2 FeB的电子结构和磁性质,结果发现Ti2FeB合金在其费米面处存在100％的自旋极化,并在5.1～6.2(A)晶格范围内被保留.Ti2FeB具有大约0.5 eV的半金属带隙和1μB的原胞总磁矩,是一个稳定的半金属铁磁体.此外,我们的研究也表明RKKY型间接交换和d电子杂化在决定合金磁性质中起决定性作用.     

Mössbauer effect study of the decagonal quasicrystal Al65Co15Cu20

The ⁵⁷Fe Mössbauer effect study at 5.0 K and in an external magnetic field of 9.0 T on a high-quality stable decagonal quasicrystal Al₆₅Co₁₅Cu_19.9Fe_0.1 is presented. It is shown that the iron atoms are located in two distinct classes of sites. The values of the principal component of the electric field gradient tensor and the asymmetry parameter at these sites are, respectively, ?1.90(10)?×?10²¹ V/m², 0.97(15) and ?3.95(12)?×?10²¹ V/m², 0.00(17).     

Mossbauer investigations of corrosion environment influence on Fe valence states in oxide films of zirconium alloys

Mössbauer investigations about iron atom redistribution in oxide films of zirconium alloys subjected to corrosion at 500°C in pure oxygen and water pair have been analysed. The alloys were also subjected to autoclave conditions at a pressure of 10.0 MPa and autoclave conditions at 350°C and at a pressure of 16.8 MPa, using distilled water and water with additives of lithium and fluorine. It is shown that, depending on the corrosion environment, various compounds of iron, such as α-Fe₂O₃, Fe₃O₄, and FeO, as solid solutions of iron in ZrO₂ are formed in oxide films.     

Photoelectron spectroscopy study of Pb/Ag(1 1 1) in the submonolayer range

The vacuum deposition of Pb onto Ag(1 1 1) gives rise to two different surface structures depending on coverage and deposition temperature. At room temperature (RT), low energy electron diffraction (LEED) reveals a sharp reconstruction completed at 1/3 Pb monolayer (ML). Beyond, a close-packed Pb(1 1 1) incommensurate overlayer develops. At low temperature (LT, ∼100 K) the incommensurate structure is directly observed whatever the coverage, corresponding to the growth of close-packed two-dimensional Pb(1 1 1) islands. Synchrotron radiation Pb 5d core-level spectra clearly demonstrate that in each surface structure all Pb atoms have essentially a unique, but different, environment. This reflects the surface alloy formation between the two immiscible metals in the reconstruction and a clear signature of the de-alloying process at RT beyond 1/3 ML coverage.     

CrO2块体及其(0 0 1)和(1 0 0)表面的电子结构和磁性质

基于密度泛函理论的第一性原理计算,我们研究了CrO2块体以及其(1 0 0)和(0 0 1)表面的磁性和电子结构。CrO2(1 0 0)表面中表面层Cr原子向内收缩,而(0 0 1)表面中的表面层Cr原子却向外伸展;越往内层,原子驰豫幅度越小。由于表面效应。表面层原子的磁矩有了大幅的提升,其中(1 0 0)表面中表面层Cr原子的磁矩最高,为3.03μB。电子结构计算表明,CrO2 (1 0 0)和(0 0 1)表面均保持了块体中良好的半金属性,并且半金属带隙在(1 0 0)表面中受到了进一步的拓宽,因此具有更稳定的半金属性     

High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

CuCrZr合金质子辐照效应的模拟研究

基于Monte Carlo方法,跟踪一大批入射粒子的运动,模拟1~10 Me V质子辐照下质子与CuCrZr合金的相互作用,计算出合金的阻止本领、能量传递、能量损失、射程、空位分布情况以及合金的辐照损伤分别与辐照深度、质子能量的关系,通过模拟CuCrZr合金在聚变反应中的工作环境,分析热沉材料的失效机理.研究结果表明:质子能量在1~10 Me V时,质子与CuCrZr合金发生非弹性碰撞,能量损失以电离能损失为主,表现出很好的抗辐照性能;质子在合金中的峰值深度随质子能量增加而增加,且近似指数关系,峰值深度为2~250μm;入射质子能量达到Me V级别时,溅射产额为零,CuCrZr合金可以很好的避免器壁的侵蚀;合金中空位的个数与入射质子能量呈线性关系,合金中空位和质子在合金中的分布具有同步性;质子损伤效率在合金深度方向呈现高斯分布,损伤最大值位置与辐照深度接近,随着入射质子能量的增加损伤效率最大值不断减小.     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.