载Ag二氧化钛纳米线的制备及其光催化性能

利用水热合成法,制备出了二氧化钛纳米线,通过葡萄糖还原Ag(NH3)+2,在制备出的二氧化钛纳米线表面负载了 Ag纳米颗粒.利用透射电镜(TEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)和紫外-可见光谱(UV-Vis)对产物进行了表征.结果表明:该Ag/TiO2纳米线在可见光区域表现出较强的吸收性能.测试了样品降解酸性红3R溶液的活性.结果表明,TiO2纳米线表面负载Ag纳米颗粒对提高其光催化性能具有积极的作用.     

基于5-磺基水杨酸的单、双核铜(Ⅱ)三元混配配合物的合成及晶体结构

以5-磺基水杨酸和咪唑衍生物为配体合成了单核、双核结构的三元混配Cu(Ⅱ)配合物:[Cu(H2 biim)(Hssal)(H2O)2]·H2O(1)和{[Cu(MeHbiim)(Hssal)(H2O)]·0.5H2O}2(2)(H3ssal=5-磺基水杨酸,H2biim=2,2'-联咪唑,MeHbiim=N-甲基-2,...     

Click Chemistry Mediated Functionalization of Vertical Nanowires for Biological Applications

Semiconductor nanowires (NWs) are gaining significant importance in various biological applications, such as biosensing and drug delivery. Efficient and controlled immobilization of biomolecules on the NW surface is crucial for many of these applications. Here, we present for the first time the use of the Cu^I‐catalyzed alkyne–azide cycloaddition and its strain‐promoted variant for the covalent functionalization of vertical NWs with peptides and proteins. The potential of the approach was demonstrated in two complementary applications of measuring enzyme activity and protein binding, which is of general interest for biological studies. The attachment of a peptide substrate provided NW arrays for the detection of protease activity. In addition, green fluorescent protein was immobilized in a site‐specific manner and recognized by antibody binding to demonstrate the proof‐of‐concept for the use of covalently modified NWs for diagnostic purposes using minute amounts of material.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

共沉淀浸渍法制备由合成气直接合成二甲醚的Cu-Mn催化剂

采用共沉淀浸渍法,制备了直接合成二甲醚的Cu-Mn-Zn催化剂,通过对组成成分及其配比的研究,发现Cu含量一定的条件下,n(Zn)/n(Mn)摩尔比对催化剂性能有较大的影响,当n(Zn)/n(Mn)=1/3～1/2时,催化剂对CO的转化率和对二甲醚的选择性达到最佳,分别为53.6%和63.5%；如锰添加比例过大,对催化剂催化合成二甲醚有微弱抑制；添加锌比例过大,会大大降低CO的转化率。载体Y分子筛的含量对催化剂性能也有影响,用量过大将降低催化剂的活性和对二甲醚的选择性,当其含量为33%时,催化剂上CO转化率和选择性可分别达到66%和68%,且催化剂活性随分子筛含量减少不再有明显的变化。     

���뼤����Cu�к�CH���໥���ò����Ŀ��������ʵ���о�

为了研究靶材料对快电子能量分布的影响,采用电子谱仪测量了飞秒激光与Cu和CH靶相互作用中在靶前和靶后产生的快电子能谱。结果显示,在靶前Cu和CH靶的快电子能谱相似,反应了快电子发射对靶材料的依赖性较弱;在靶后Cu和CH靶的快电子能谱具有明显的差异,说明电子的输运过程与靶材料密切相关。冷电子环流以及自生磁场是导致Cu靶快电子能谱"软化"的原因,而对于CH靶麦克斯韦分布的快电子能谱主要由碰撞机制决定。     

衬底对Cu(In,Ga)Se2薄膜织构的影响

分别在苏打石灰玻璃、Mo箔、无择优取向的Mo薄膜以及(110)择优取向的Mo薄膜四种不同衬底上，采用共蒸发工艺沉积约2 μm厚的Cu(In,Ga)Se₂薄膜，用X射线衍射仪测量薄膜的织构，研究衬底对Cu(In,Ga)Se₂薄膜织构的影响.在以上四种衬底上沉积的Cu(In,Ga)Se₂薄膜的(112)衍射峰强度依次逐渐减弱，(220/204)衍射峰从无到有且强度逐渐增强.在苏打石灰玻璃和Mo箔衬底上的Cu(In,Ga)Se_{2关键词： 择优取向 Cu(In 2}薄膜')" href="#">Ga)Se₂薄膜 太阳电池     

层厚度和应变率对铜-金复合纳米线力学性能影响的模拟研究

采用分子动力学模拟方法, 研究了层厚度和应变率对铜-金多层复合纳米线在均匀拉伸载荷下力学性能的影响, 并分析了铜-金位错成核机理. 研究结果表明, 随着铜-金层厚度的增加, 复合材料的屈服强度也随之增大; 高应变率时复合材料的力学性能比低应变率时要强, 低应变率的塑性形变主要是位错运动和孪晶形变, 而高应变率主要以单原子运动为主, 表现出了非晶化. 该研究对制备高性能的多层复合材料提供了一定的理论依据.