THERMAL PROPERTY, MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF POLY（3-HYDROXYBUTYRATE-co- 3-YDROXYHEXANOATE） AND POLY（BUTYLENE SUCCINATE-ADIPATE） （PHBHHX/PBSA） BLENDS

Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.     

多组分单体接枝聚丙烯/尼龙6反应共混物结晶行为研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)共同接枝到聚丙烯 (PP)上 ,制得具有较高GMA接枝率的多单体接枝聚丙烯 ,PP g (GMA co St) .将PP g (GMA co St)与尼龙 6 (PA6 )进行共混 ,利用扫描电镜 (SEM) ,差示扫描量热计 (DSC)和广角X射线衍射 (WAXD)对共混物的形态和结晶进行了研究 .在共混过程中 ,PP g (GMA co St)与PA6反应原位生成了PP g PA6 ,有效改善了共混物的相容性 ,分散相尺寸明显减小 .在PP g (GMA co St) PA6为 3 7的体系中 ,PP g (GMA co St)出现分级结晶现象 ,其在较低温度下的结晶属于均相成核结晶 .在PP g (GMA co St) PA6为 7 3的体系中 ,由于PA6相分散细微 ,在通常结晶温度下不结晶 ,而是在低温下均相成核与PP g (GMA co St)同时结晶 .WAXD证实体系中接枝PP ,PA6为分别结晶 ,无共晶或新的晶型产生     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨     

Effects of Heat Treatment on the Crystallization Behavior of Poly(3-alkylthiophenes)

IntroductionPoly( 3- alkylthiophenes) ( P3ATs) ,as a newkind of soluble,fusible and processable conductivepolymers,have attracted a great interest and muchattention ofchemistsand physicists[1,2 ] . Ithas beenwidely accepted that P3ATs can form similarlayered structures with alkyl side chains beingoriented in the lateral a- axis direction[3— 6] .Moreover,when the number of the carbon atoms inthe alkyl side chains is more than1 0 ,some orderlyarrangements of the side chains will occur between…     

大分子固液界面吸附行为的数字模拟研究方法

介绍了随机数字模拟方法在研究链状大分子吸附行为的一般原理,以立方格子模型的自避行走为例,分析了模型的建立、初始位形的产生以及分子链运动的处理方法.回顾了随机数字模拟方法在研究大分子界面吸附行为方面的发展状况.预测了随机数字模拟方法在大分子吸附行为研究方面的应用前景.     

A Study of PbTiO3 Crystallization in Pure and Composite Nanopowders Prepared by the Sol-Gel Technique

Summary.  In this investigation the crystallization of PbTiO₃ upon annealing of pure nanopowders and PbTiO₃–SiO₂ (1:1 v/v) nanocomposite powders prepared by the sol-gel technique was studied. Using X-ray diffraction phase analysis, the start of PbTiO₃ crystallization in pure PbTiO₃ powders was detected at 400°C. Distinct crystallization of PbTiO₃ in PbTiO₃–SiO₂ nanocomposites starts at 700°C, whereas SiO₂ remains amorphous. There are indications that an interface interaction between the PbTiO₃ and the SiO₂ phase plays an important role in hindering the crystallization of PbTiO₃. The particle size (size of coherently scattering regions) was estimated from the broadening of the X-ray diffraction line profiles. The average size of PbTiO₃ nanocrystallites increases with temperature and time of annealing, the influence of temperature being more significant than that of the annealing time. Differential scanning calorimetry confirmed the results of the X-ray diffraction with respect to the start of the crystallization. Laser beam scattering and scanning electron microscopy provided the statistical distribution of the grain size and the morphology of the powder grains, showing that each grain of the powders contains several nanocrystallites (coherently scattering regions). Received October 4, 2001. Accepted (revised) December 14, 2001     

Synthesis and Characterization of Nitrato-Triamine-Metal(II) Complexes. Conglomerate Crystallization Part 55. Crystal Structure of [Ni(dien)(O2NO)(ONO2)] (I), {[Cu(dien)-(μ-ONO2)]NO3}∞ (II), [Zn(dien)(O2NO)(ONO2)] (III), [Ni(Medpt)(O2NO)(ONO2)] (IV) and [Cu(Medpt)(ONO2)2] (V)

In absolute ethanol and in the presence of triethylorthoformate, reactions of metal(II) nitrates with linear tridentate amines afforded metal complexes of the formula M(NNN)(NO₃)₂, where M = Ni²⁺, Cu²⁺ and Zn²⁺, and NNN = dien and Medpt. The compounds fall into three categories in accordance with their stereochemistry and mode of binding of the nitrato ligands. Compounds I, [Ni(dien)(O₂NO)(ONO₂)] and III, [Zn(dien)(O₂NO)(ONO₂)] are isomorphous and isostructural. They crystallize in the monoclinic space group P2₁/n with nearly identical cell constants. The stereochemistry of these two compounds is such that the terdentate dien ligand forms a fac MN₃ moiety with the two oxygens of the bidentate nitrato ligand trans to the terminal NH₂. These ligands form the base of the octahedral arrangement in which the sixth position, trans to the secondary nitrogen of the dien, is an oxygen of the monodentate nitrato ligand. Compound IV, [Ni(Medpt)(O₂NO)(ONO₂)] falls into the same category as I and III despite the fact that the two rings in the Ni-Medpt moiety are six-membered rings, unlike those in compounds I and III which are five-membered rings. Nevertheless, the nickel-amine arrangement is fac. The bidentate nitrato-oxygens are trans to the terminal NH₂ of the amine ligand, and the oxygen of the monodentate nitrato ligand is trans to the tertiary amine-nitrogen. Such stereochemistry is prevalent for nickel and zinc compounds. Interestingly, compound IV crystallizes as a conglomerate (space group P2₁2₁2₁). Compound II, {[Cu(dien)(μ-ONO₂)]NO₃}_∞ belongs to the second category and has a polymeric structure. The repeating fragment in the polymeric chain is a Cu(dien)-O fragment with the monodentate nitrato ligand occupying an equatorial position of the base. A second oxygen of the equatorial nitrate becomes an axial ligand for an adjacent Cu-N₃O fragment. In this way the substance propagates into an infinite chain. The repeating unit has an effective square pyramidal, five-coordinate, configuration. Finally, the compound crystallizes as a racemate. The second nitrate necessary for charge compensation of this copper(II) compound is ionic and its function is to hold the infinite chains of the lattice. The third category represented by compound V, [Cu(Medpt)(ONO₂)₂] contains two molecules in the asymmetric unit of the racemic lattice (monoclinic, space group P2₁/a). The structure of Cu-Medpt is unlike that of IV in that both species present in the asymmetric unit have the amine ligand in a mer configuration which together with a monodentate oxygen of a nitrato ligand form a base plane of a square pyramid. The fifth ligand of both Cu²⁺ ions is a second monodentate nitrato ligand. The stereochemical differences between the two Cu²⁺ ions are insignificant for the Cu-Medpt fragment, which share the same conformation and configuration. The major difference between the two species is the torsional angles defined by the Cu-O-N-O angles. The difference arises from variation in the hydrogens of the primary amine moieties selected by nitrato-oxygens to form intramolecular hydrogen bonds. Finally, there is a little variation in the equatorial Cu-ONO₂ stereochemistry because of steric hindrance, imposed by the Medpt, preventing large torsional angles by these nitrato ligands. This is evident by comparing the two copper species shown in Finally, nitrate-to-Br ligand exchange was found to take place when KBr pellets are prepared for IR spectral measurements.     

贵金属Au冷却过程中结构及能量变化的分子动力学计算机模拟

通过分子动力学方法,研究了不同冷速下贵金属Au在温度2000～300K的冷却过程中微观结构的变化特点。结果发现,冷却速度对Au的微观结构产生重要影响。采用偶关联函数和键对分析技术对原子局域团簇结构进行分析,并考察了冷却过程中原子势能随温度的变化,比较了Au的微观结构转变与能量变化的对应关系,从能量转化的角度对冷却过程中Au的结构变化进行了说明。     

The Crystallization of Poly (3-dodecyltbiophene) in an Oriented Solidification Environment

Poly (3-alkylthiophenes) (P3ATs) have made up of a family of conductive polymerswhich are soluble, fusible and processable, since the introduction of flexible alkyl sidechains"'. It is generally accepted that P3ATs can form similar layered structures. inwhich the thiophene rings possess planarity and the side chains act as spacers'-'. Whenthe number. of 'carbon atoms of alkyl side chains is more than 10, some orderlyarrangements will occur for side chains betWeen the' layers'. It has been w…     

2,3,7,8,12,13‐Hexaaryltruxenes: An ortho‐Substituted Multiarm Design and Microwave‐Accelerated Synthesis toward Starburst Macromolecular Materials with Well‐Defined π Delocalization

We present herein a novel design and the efficient synthesis towards a “homogeneous” starburst fluorene system based on the novel 2,3,7,8,12,13‐hexaaryltruxene scaffold. Controlled microwave heating provides a facile and powerful approach for each step in the synthesis of these bulky materials with large steric hindrance, suggesting an avenue to access structurally well‐defined complex organic semiconductors (OSCs) rapidly and conveniently with high yield and purity. The resulting materials exhibited good thermal stability and an excellent glassy structure as revealed by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) as well as wide‐angle X‐ray diffraction (WAXD) studies. Moreover, compared with their corresponding three‐arm‐substituted counterparts T1 – T4 , the introduction of the ortho substituents around the truxene core in Tr1 – Tr4 results in significant blueshifts (of 7–24 nm) of the absorption maxima λ_max and higher energy optical gaps (E_g). Comparative studies with corresponding linear, rod‐shaped oligofluorene counterparts (OFX) have revealed that the longest para‐conjugated segment in the TrX (X=1–4) structures plays the dominant role in determining their electronic properties. UV/Vis data and cyclic voltammetry (CV) investigations have indicated that there is little electronic interaction between the arms, even for the shortest armed oligomer Tr1 . A clear linear relationship of both 1/λ_max and E_g with the inverse of (n+1) for these branched systems was found. Our findings highlight a novel molecular design comprising an ortho‐substituted, multiarmed architecture that would allow the introduction of isotropic physical and/or mechanical properties, while at the same time maintaining most of the important electronic properties of the rod‐shaped constituents of a fully conjugated system.