Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Surface-enhanced Raman scattering study of polymer on metals. III. Chemisorbed polybenzimidazole and its corrosion-inhibiting properties at high temperature

Chemisorption of polybenzimidazole on silver and copper etched with nitric acid has been observed by surface-enhanced Raman scattering (SERS). The polymer is found to react chemically with silver, forming a complexed film on the surface. The SERS spectra show that polybenzimidazole film inhibits oxidation of the metal at high temperature, unlike chemisorbed benzimidazole, benzotriazole, and poly(4-vinyl pyridine). © 1992 John Wiley & Sons, Inc.     

Properties of polystyrene-poly(methylmethacrylate) random and diblock copolymers in dilute and semidilute solutions

Solution properties for random and diblock copolymers of polystyrene (PS) and poly(methyl methacrylate) (PMMA) have been measured by dynamic and total intensity light scattering in solvents of differing quality. The results are compared with the corresponding properties for PS and PMMA homopolymers of similar molecular weight, in order to determine if interactions between unlike monomers are significant. The hydrodynamic radius (R_h) and diffusion second virial coefficient (k_d) for the random copolymer are found to be larger than the corresponding values for the homopolymers in a solvent which is near-theta for the two homopolymers, whereas no such effect is observed for the block copolymer. This suggests that most intrachain interactions occur a relatively short distance along the chain backbone. In a mutual good solvent R_h and k_d of the random copolymer are comparable to the average of the values for the homopolymers, indicating that in a good solvent monomer/solvent interactions dominate over monomer/monomer interactions. For an isolated diblock copolymer in a mutual good solvent, there is no evidence that interactions between unlike monomers lead to additional expansion of the entire molecule, as measured by R_h, nor expansion of the individual blocks as probed by light scattering with one block optically masked. However, at low but finite concentration there is evidence (the coefficients of the binary interaction terms in the viscosity and the mutual diffusion coefficient, and the second and third virial coefficients) that a weak ordering effect may exist in block copolymer solutions, far from the conditions where microphase separation occurs. Finally, measurements of ternary polymer-polymer-solvent solutions show no dependence on monomer composition or monomer distribution for the tracer diffusion of probe PS-PMMA copolymers in a PMMA/toluene matrix. This indicate that the frictional interaction is largely unaffected by interactions between unlike monomers. However, there is evidence that the thermodynamic interaction is more unfavorable between a random copolymer and the homopolymer matrix than between a diblock and the matrix. © 1994 John Wiley & Sons, Inc.     

Influence of concentration on the activation energy for diffusion in polymer-solvent systems

The self-diffusion of benzene, toluene, and ethylbenzene in polystyrene have been analyzed using the Vrentas/Duda free-volume diffusion model. Diffusion coefficient predictions suggest an exponential concentration dependence of the activation energy required to overcome attractive forces, E. Without the use of any diffusion data approximating E as zero over the entire concentration range yields self-diffusion coefficient predictions which are in good agreement with experimental data. © 1992 John Wiley & Sons, Inc.     

Inexact Newton methods for the nonlinear complementarity problem

An exact Newton method for solving a nonlinear complementarity problem consists of solving a sequence of linear complementarity subproblems. For problems of large size, solving the subproblems exactly can be very expensive. In this paper we study inexact Newton methods for solving the nonlinear, complementarity problem. In such an inexact method, the subproblems are solved only up to a certain degree of accuracy. The necessary accuracies that are needed to preserve the nice features of the exact Newton method are established and analyzed. We also discuss some extensions as well as an application. This research was based on work supported by the National Science Foundation under grant ECS-8407240.     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

Crystallographic report: Bis{µ‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]1κ:S,2κ:S‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]‐1κ2S,S′}dicadmium(II)

The centrosymmetric title compound, [Cd₂{CH₃OC₆H₄P(OC₅H₉)S₂}₄], features an eight‐membered [? Cd? S? P? S? ]₂ ring owing to the presence of bridging dithiolate ligands. Tetrahedral coordination geometries for cadmium are completed by chelating ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

Domain size equilibration in sphere‐forming block copolymers

The kinetics of domain size equilibration were studied for asymmetric poly(ethylene‐alt‐propylene)‐b‐poly(dimethyl siloxane) (EPDMS) and polyisoprene‐b‐poly(dimethyl siloxane) (IDMS) block copolymers in the body‐centered cubic ordered phase. Small‐angle X‐ray scattering measurements of the principal peak position (q*) were made as a function of time after temperature jumps within the ordered state. The equilibration times were remarkably long, especially on cooling and for temperatures below 100 °C. For example, after a quench to 40 °C, q* for EPDMS had not fully equilibrated even after several weeks of annealing; IDMS required several days to equilibrate at the same temperature. In contrast, a lamella‐forming EPDMS sample was able to adjust q* within the timescale of the measurements (i.e., minutes) with both heating and cooling over the same temperature range. Measurements of tracer diffusion indicated that chain mobility was not the rate‐limiting step, although differences in mobility did account for the differences between EPDMS and IDMS. Rather, the limiting step was the required reduction in the number density of spheres on cooling; the disappearance of spheres, either by evaporation or by fusion, provided a large kinetic barrier. Lamellae, however, could adjust domain dimensions simply by local displacements of individual chains. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 715–724, 2003     

架起传统与现代的桥梁--建筑历史与理论课程体系教学改革的思考

重新审视建筑历史理论教学的目标、内容、教学方式和手段，通过对国内几座有影响的建筑院校的调研，比较各个院校在这些问题及途径上的异同，分析其利弊，以期促进建筑历史与理论课程体系教学的建设和改革．