Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.     

The MPE/UCB far-infrared imaging Fabry-Perot interferometer (FIFI)

FIFI is an imaging spectrometer with two or three Fabry-Perot interferometers (FPI) in series for airborne astronomical observations in the far-infrared range (=40...200m). It employs 5×5 arrays of photoconducting detectors and offers spectral resolutions as small as 2km/s. Resolution and bandwidth can be set over a wide range to match a variety of astronomical sources. Cryogenic optics minimizes thermal background radiation and provides for in-flight step tunable spatial resolution. At 158 m wavelength the background-limited NEP is 3 × 10^-15W/Hz at 40 km/s resolution and with two FPI's; with three FPI's the expected NEP is 10^-15WHz at 5 km/s resolution.The frequency-chopping mode of the high-resolution Fabry-Perot allows for line detection in extended objects. Absolute internal flux calibration ensures adequate flat fielding of the array elements.     

微粉化技术提高水不溶性药物溶解度

药物的微粉化可以改善颗粒的润湿性,进而提高水不溶性药物的溶解度和溶解速率。目前普遍采用的药物微粒化技术主要包括机械研磨、超临界流体过程、低温喷淋和溶剂蒸发沉积过程。本文介绍了这些微粉化制备技术的基本原理以及该类技术的应用进展。     

The reinforcing effect of polydopamine functionalized graphene nanoplatelets on the mechanical properties of epoxy resins at cryogenic temperature

In order to obtain epoxy nanocomposites with excellent mechanical properties at cryogenic temperature, an efficient method to functionalize graphene nanoplatelets (GNPs) is proposed. Through a simple dip-coating procedure, the GNPs were first functionalized with deposition of polydopamine coating (PDA@GNPs). Then, using polydopamine as a bridge, the PDA@GNPs were modified with amine groups after polyetheramine T403 grafting (T403-PDA@GNPs). Fourier transform infrared spectroscopy, thermogravimetric analysis and X-ray photoelectron spectroscopy analyses proved the successful functionalization of PDA and polyetheramine T403 on the surface of GNPs. Adding 0.1 wt% T403-PDA@GNPs significantly improved the cryogenic tensile strength and impact strength of the epoxy nanocomposites by 34.5% and 64.5%, which showed greater reinforcing effect than the pristine GNPs (12.6% and 19.1%) and PDA@GNPs (26.3% and 50.1%). The results of dynamic mechanical analysis and scanning electron microscopy observations indicated that the PDA and further polyetheramine T403 functionalization improved the interfacial interactions between GNPs and matrix, which ensured the much improved mechanical properties.     

The Determination Of Sub Part-Per-Billion Levels Of Volatile Organic Compounds In Air By Pre-Concentration From Small Sample Volumes

Abstract

Trace level Volatile Organic Compounds (VOCs) in ambient air are normally determined according to EPA Method TO-14. This method describes the analysis in ambient air of 41 VOCs, ranging in boiling point from -29 to 215°C. It covers a concentration range from 0.2 to 20 parts per billion, volume/volume (ppb), and specifies sample enrichment of a 400 mL air sample on glass beads at -160°C. While this sample volume provides sub-ppb levels of VOC detection for target analytes when using a quadrupole mass spectrometer detector in SIM mode or when using GC detectors, the identification of non-target analytes may only be done in full scan mode for higher concentrations. Also with this sample volume a Nafion dryer is needed for water removal thereby lowering the recovery of polar VOCs.

Because of the very high sensitivity of the ion trap MS, relatively small air volumes (60 mL) are adequate to obtain the required or lower detection levels. An integrated air analysis system based on a GC-ion-trap MS has been investigated and is described. This system has a built-in cryogenic trap and necessary valving, internal standard gas sampling loop, and is controlled from the GC-MS workstation. The linearity, precision, and method detection levels obtainable with this system when using small volumes are reported. In addition, examples of the quantitative and qualitative analysis of ambient air samples are shown.     

Flame stabilization in high pressure LOx/GH2 and GCH4 combustion

Planar laser induced fluorescence (PLIF) of OH is used to examine flame stabilization in high pressure cryogenic flames formed by injecting a central jet of low speed liquid oxygen surrounded by a high speed gaseous stream of hydrogen or methane. In the LO_x/GH₂ experiments injection conditions are transcritical as the chamber pressure is above critical but the temperature is below critical . In the LO_x/GCH₄ experiments the chamber pressure and LO_x injection temperature are below critical , . Hydrogen or methane are injected at room temperature LIF images delineate the flame edge in the injector nearfield. The two flames are stabilized in the vicinity of the liquid oxygen injector lip but the anchor point is found to lie closer to the lip in the LO_x/GH₂ case and its displacement from shot to shot is of a smaller amplitude than that corresponding to the LO_x/GCH₄ flame. Interpretation of these data is based on a previous analysis which indicates that stabilization is essentially controlled by a dimensionless group formed by comparing the lip thickness to the flame edge thickness Ψ = h_s/δ_f. It is found that Ψ slightly exceeds unity in the LO_x/GH₂ case essentially fulfilling the stability condition while Ψ < 1 in the LO_x/GCH₄ case. In this last situation the flame is thicker than the characteristic thickness h_s and it is therefore sensitive to the high speed methane stream. Anchoring is imperfect and the flame edge moves with the turbulent eddies shed from the lip. Global stabilization is achieved dynamically but the reactive layer is not well established and the large amplitude motion of the edge is a symptom of a possible lift-off. Theoretical estimates indicate that LO_x/GCH₄ flame stabilization requires a thicker lip size than the LO_x/GH₂ propellant couple.     

低温液体无损贮存压力升高的实验与计算

准确、简单地预测低温液体无损贮存时的压力升高具有重要的实用价值。对一低温容器利用液氮为介质进行了多次无损贮存实验,利用多元线性回归方法对实验数据进行分析和检验。分析表明无损贮存时间、初始充满率对压力升高的影响较大,而环境温度的影响可以忽略,并拟合出了压力升高的计算公式。计算结果和实验结果在很大范围内能够较好地吻合。该种计算方法在预测低温液体无损贮存压力升高时有较高的准确性与可靠性。     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

氮低温制冷循环系统在大科学装置中的应用与发展

大科学装置中低温设备的氮低温冷量需要日益快速增长,为减少能耗和保障装置的长期稳定运行,基于大科学装置氮低温系统运行需求,介绍了氮低温制冷循环系统在国内外大科学装置中的应用情况,总结了目前大科学装置中应用氮低温制冷循环系统的研究现状,并探讨以氮制冷机为核心的氮低温制冷循环系统在未来大科学装置中发展方向。     

高温超导电缆终端预制式应力锥的设计与分析

高温超导电缆终端是高温超导电缆系统的重要组成部分。借鉴常规电缆终端预制式应力锥的设计理论,结合高温超导带材的特殊工作特性,选用耐低温的绝缘材料,对高温超导电缆终端预制式应力锥进行设计。运用有限元分析软件ANSYS对设计的高温超导电缆终端预制式应力锥进行建模和仿真计算,得到终端处的电场和电位分布,并将仿真结果和理论计算结果进行对比分析,验证设计的可行性,为进一步的研究奠定了基础。