大豆油煎炸过程理化指标与LF-NMR弛豫特性的相关性研究

在对大豆油无料/薯条煎炸过程[温度:(180±5)℃,持续36 h]中的酸价(AV)、粘度(V)、吸光值(A)及总极性化合物(TPC)含量等及低场核磁共振(LF-NMR)弛豫特性(峰起始时间T21、T22、T23、相应的峰面积比例S21、S22、S23、单组份弛豫时间T2W)变化规律研究的基础上,利用多元回归分析建立了理化指标与其LF-NMR检测结果的相关性模型,并进行验证。结果表明:大豆油的酸价、TPC含量及S21峰面积均随煎炸时间的延长而线性增大,T21、T22峰起始时间及T2W则随煎炸时间的延长而线性减小(r2>0.90),粘度、吸光值随煎炸时间的延长逐渐增加并符合二项式关系(r2>0.90),而T23峰起始时间及S22、S23与煎炸时间之间无明显规律性变化。煎炸薯条后,油样的酸价、粘度、TPC含量、吸光值及S21均较无料煎炸显著增大(P<0.05),而T21、T22峰起始时间及T2W显著缩短。多元回归分析表明,酸价及TPC含量与T2W、T21,粘度与T2W,吸光值与S21间均可建立良好的相关性模型(R2>0.93)。模型验证合理可靠,可通过油样的LF-NMR检测结果有效预测其理化指标的变化。     

Synthesis of benzaldehyde-functionalized LewisX trisaccharide analogs for glyco-SAM formation

LewisX (Le^x) antigen based carbohydrate–carbohydrate interactions are mediated by complexation of metal ions. Although theoretical studies about the influence of participating hydroxyl groups in the Le^x trisaccharide head group (Galβ(1-4)[Fucα(1-3)]GlcNAc) could gave same rudimental information about the basic mechanism behind this interaction, a little is known about orientation and configuration of the hydroxyl groups required for the specific interaction mediated by Ca²⁺ complexation. Therefore, there is a need of non-natural derivatives to provide detailed information about the requirements for hydroxyl group arrangement in Le^x head group surface plasmon resonance and gold nanoparticle techniques have shown to be powerful tools to investigate carbohydrate–carbohydrate interactions. Benzaldehyde-functionalized glycans can be used for attachment to both gold nanoparticles and surface plasmon resonance sensor surfaces. Therefore, seven benzaldehyde equipped Le^x analogs including the natural trisaccharide were synthesized utilizing convergent approach. The derivatives were applied in ongoing carbohydrate–carbohydrate interaction studies by surface plasmon resonance experiments to prove theoretical postulate about the structural requirements of hydroxyl group arrangements in Le^x trisaccharides.     

Performance of density functional theory in computing nonresonant vibrational (hyper)polarizabilities

A set of exchange‐correlation functionals, including BLYP, PBE0, B3LYP, BHandHLYP, CAM‐B3LYP, LC‐BLYP, and HSE, has been used to determine static and dynamic nonresonant (nuclear relaxation) vibrational (hyper)polarizabilities for a series of all‐trans polymethineimine (PMI) oligomers containing up to eight monomer units. These functionals are assessed against reference values obtained using the Møller–Plesset second‐order perturbation theory (MP2) and CCSD methods. For the smallest oligomer, CCSD(T) calculations confirm the choice of MP2 and CCSD as appropriate for assessing the density functionals. By and large, CAM‐B3LYP is the most successful, because it is best for the nuclear relaxation contribution to the static linear polarizability, intensity‐dependent refractive index second hyperpolarizability, static second hyperpolarizability, and is close to the best for the electro‐optical Pockels effect first hyperpolarizability. However, none of the functionals perform satisfactorily for all the vibrational (hyper)polarizabilities studied. In fact, in the case of electric field‐induced second harmonic generation all of them, as well as the Hartree–Fock approximation, yield the wrong sign. We have also found that the Pople 6–31+G(d) basis set is unreliable for computing nuclear relaxation (hyper)polarizabilities of PMI oligomers due to the spurious prediction of a nonplanar equilibrium geometry. © 2013 Wiley Periodicals, Inc.     

Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.     

Laterally dibenzyloxy-branched nematogens with large nematic range and rich solid polymorphism

Mesogenic compounds containing four rings in the core usually have very high melting points. However, when two identical lateral benzyloxy groups are introduced on the same side of one of the central rings, the melting point is lowered dramatically and a large nematic range is retained. This range is affected by the bulkiness of the para-substituents in the lateral rings. Methyl groups can be introduced in the ortho- or meta-positions with a consequent decrease in the melting temperature without much affecting the nematic range. These compounds exhibit a rich solid polymorphism which is certainly related to the effect of the conformations of the lateral substituent on the molecular arrangment in the solid phase. Some preliminary NMR experiments on the nematic phase indicate that the molecular long axis coincides with the core axis, whereas the para-axis of the lateral fragment makes an angle close to the magic angle with respect to the molecular long axis.     

Dielectric behaviour of binary dual-frequency nematics with low crossover frequencies

Binary dual-frequency nematic liquid crystals synthesised at the Military University of Technology were measured by dielectric means. All the investigated materials exhibit low crossover frequency. They were composed of only two molecules with longitudinal and transverse dipole moments. The main difference is the molecular weight of the molecules. Results of relaxation parameters of detected mode and crossover frequency are shown. The influence of structure on ion conductivity is discussed. The broad phase transition from an isotropic phase to a nematic one was observed.     

A convenient synthesis and the mesomorphic properties of new chiral ferroelectric thiobenzoates

A secondary chiral (R)-(?)-2-alcohol underwent the Mitsunobu reaction with triphenylphosphine, diethyl azodicarboxylate and ethyl 4-hydroxybiphenylcarboxylate, resulting in the desired (S)-(+)-product with high enantiomeric purity (>99% ee), with the chiral branched chain attached to the biphenyl. This method is operationally simple and provides the very important chiral precursor in good yields (62% in dry THF and 72% in dry Et₂O). The condensation of the (S)-(+)-acid chloride from this material and a suitable 4-n-alkylthiophenol in toluene in the presence of pyridine or triethylamine furnishes the chiral (S)-(+)-thiobenzoate liquid crystals in good yields (80–83% in pyridine and 65–68% in Et₃N). (S)-(+)-4-(1-Methylheptyloxy)biphenyl 4-alkylthiobenzoates are abbreviated (S)-MHOBSn , where n varies from 4 to 10 and denotes the number of carbon atoms in the alkyl chain. DSC, polarizing microscopy and X-ray diffraction showed that the (S)-MHOBSn series possesses a rich phase polymorphism: two highly ordered tilted phases CrG* and SmI*, as well as the ferroelectric smectic C (SmC*) and chiral nematic (N*) phase. In this series, the seldom observed transition between the chiral phases SmI*–SmC* is seen. All the compounds possess stable enantiotropic SmC* and N* phases. The existence of weak intermolecular hydrogen-bonding in (S)-MHOBSn was confirmed by FTIR spectroscopy.