Theoretical approach and the practice to the evaluation of structural parameters characterizing concentration polarization alongside ion-exchange membranes by means of dielectric measurement

As the application of a dielectric theory proposed previously (J Membrane Sci 64:153–161 (1991)), theoretical formulation and the practical procedure of dielectric analysis are developed to calculate the structural parameters such as the conductivity gradient and the thickness of the concentration polarization layer, the capacitances and the conductances of the two adjoining aqueous phases from the observed dielectric parameters. The procedure of calculation consequent upon the theoretical formulation was applied to double relaxation data observed for cation-exchange membrane systems under application of d.c. bias voltage. As a consequence, the structural parameters of concentration polarization were readily obtained with accuracy.     

Propagating transverse electric and transverse magnetic modes in liquid crystal-clad planar waveguides

ABSTRACT

In a planar dielectric waveguide, weak confinement of a propagating mode in a high index core leads to a measurable evanescent interaction with the cladding. In this work, we study the effect of a reorientable anisotropic cladding on the behaviour of Transverse Electric (TE) and Transverse Magnetic (TM) mode polarisations using a liquid crystal (LC)-clad waveguide architecture. The polarised evanescent field of a guided mode interacts with a voltage-tunable birefringent LC cladding to deflect an out-coupled beam. Experimental measurements are coupled with a theoretical framework and show good consistency with simulation results. We isolate the effect of mode confinement by changing the thickness of the high index core. Interactions between the LC index ellipsoid and the mode polarisation are probed by changing the initial alignment of the LC. Finally, we examine the difference in deflection between TE and TM modes, which incorporates both a change in mode confinement and a difference in LC index components.     

Evidence of a phase transition of RbHCO3 from high-resolution solid-state 13C and 87Rb NMR by comparison with KHCO3

A variable-temperature high-resolution 13C and 87Rb solid-state NMR study of powder rubidium hydrogencarbonate, RbHCO3, is presented for the first time. At ambient temperature, RbHCO3 is formed by centrosymmetric dimers linked by hydrogen bonds, but almost no information is available on this compound concerning proton disorder and the low-temperature phase. However, potassium hydrogencarbonate, KHCO3, which has an isomorphic structure for the high temperature phase, was well studied: it undergoes a non-ferroic, non-ferroelectric phase transition at Tc = 318 K between two monoclinic structures. The protons are disordered in an asymmetric double-well potential in the low-temperature phase, and the double-well potential becomes symmetric in the high-temperature phase. By comparison with recent solid-state NMR experimental results on KHCO3, we show that RbHCO3 undergoes a phase transition at Tc approximately 245 K, and give evidence that the proton dynamic disorder in both compounds is very similar.     

Comparison of linear-scaling semiempirical methods and combined quantum mechanical/molecular mechanical methods for enzymic reactions. II. An energy decomposition analysis

QM/MM methods have been developed as a computationally feasible solution to QM simulation of chemical processes, such as enzyme-catalyzed reactions, within a more approximate MM representation of the condensed-phase environment. However, there has been no independent method for checking the quality of this representation, especially for highly nonisotropic protein environments such as those surrounding enzyme active sites. Hence, the validity of QM/MM methods is largely untested. Here we use the possibility of performing all-QM calculations at the semiempirical PM3 level with a linear-scaling method (MOZYME) to assess the performance of a QM/MM method (PM3/AMBER94 force field). Using two model pathways for the hydride-ion transfer reaction of the enzyme dihydrofolate reductase studied previously (Titmuss et al., Chem Phys Lett 2000, 320, 169-176), we have analyzed the reaction energy contributions (QM, QM/MM, and MM) from the QM/MM results and compared them with analogous-region components calculated via an energy partitioning scheme implemented into MOZYME. This analysis further divided the MOZYME components into Coulomb, resonance and exchange energy terms. For the model in which the MM coordinates are kept fixed during the reaction, we find that the MOZYME and QM/MM total energy profiles agree very well, but that there are significant differences in the energy components. Most significantly there is a large change (approximately 16 kcal/mol) in the MOZYME MM component due to polarization of the MM region surrounding the active site, and which arises mostly from MM atoms close to (<10 A) the active-site QM region, which is not modelled explicitly by our QM/MM method. However, for the model where the MM coordinates are allowed to vary during the reaction, we find large differences in the MOZYME and QM/MM total energy profiles, with a discrepancy of 52 kcal/mol between the relative reaction (product-reactant) energies. This is largely due to a difference in the MM energies of 58 kcal/mol, of which we can attribute approximately 40 kcal/mol to geometry effects in the MM region and the remainder, as before, to MM region polarization. Contrary to the fixed-geometry model, there is no correlation of the MM energy changes with distance from the QM region, nor are they contributed by only a few residues. Overall, the results suggest that merely extending the size of the QM region in the QM/MM calculation is not a universal solution to the MOZYME- and QM/MM-method differences. They also suggest that attaching physical significance to MOZYME Coulomb, resonance and exchange components is problematic. Although we conclude that it would be possible to reparameterize the QM/MM force field to reproduce MOZYME energies, a better way to account for both the effects of the protein environment and known deficiencies in semiempirical methods would be to parameterize the force field based on data from DFT or ab initio QM linear-scaling calculations. Such a force field could be used efficiently in MD simulations to calculate free energies.     

Recent progress in nanomaterial-enhanced fluorescence polarization/anisotropy sensors

In this review, we summarize the number of scientific publications in the field of FP/FA sensor in recent five years, and introduce the recent progress of FP/FA sensor based on nanomaterial. The various analytical applications of FP/FA sensor based on nanomaterial are discussed. We also provide perspectives on the current challenges and future prospects in the promising field.     

Comparative study of three immunoassays based on monoclonal antibodies for detection of the pesticide parathion-methyl in real samples

Three immunoassay systems: indirect, direct competitive enzyme-linked immunosorbent assay (IC-ELISA and DC-ELISA), fluorescence polarization immunoassay (FPIA) based on monoclonal antibodies for the detection of parathion-methyl (PM) were developed and optimized. Several PM derivatives (haptens) were conjugated to proteins and fluoresceinthiocarbamyl ethylenediamine (EDF) to obtain immunogens and competitors. The influence of immunogen and competitor structures on the assay performance was investigated. IC-ELISA was the most sensitive of all techniques developed, with a detection limit of 0.08 ng ml⁻¹, but assay time was the longest (3.5 h per 96-well microtitre plate). DC-ELISA was easier to perform and quicker (1.5 h per 96-well microtitre plate) but less sensitive than IC-ELISA (detection limit was 0.5 ng ml⁻¹). FPIA was the fastest and simplest (7 min per 10 samples) but the least sensitive (detection limit was 15 ng ml⁻¹) technique. The methods were characterized by high specificity and reproducibility. The cross-reactivity for parathion-ethyl was around 30-40% for IC-ELISA and FPIA, but significantly higher (125%) for DC-ELISA. The immunoassays were applied to the analysis of PM residues in different food and environmental matrices. Methanol extracts of vegetable, fruit and soil samples were used for the analysis. Recoveries for most spiked samples averaged between 85 and 110%. The methods developed can be used for screening of food and environmental samples for PM residues without complicated clean-up.     

Synthesis and Evaluation of Biocompatible pH‐Sensitive Hydrogels as Colon‐Specific Drug Delivery Systems

Because of the growing importance of pH‐sensitive hydrogels as drug delivery systems, biocompatible copolymeric hydrogels based N‐vinyl‐2‐pyrrolidinone (NVP) and methacrylic acid (MAA) were designed and synthesized. These hydrogels were investigated for oral drug delivery. Radical copolymerizations of N‐vinyl‐2‐pyrrolidinone (NVP) and methacrylic acid (MAA) with the various ratios of cross‐linking agent were carried out at 70 °C. Azabisisobutyronitrile (AIBN) was the free‐radical initiator employed and Cubane‐1,4‐dicarboxylic acid (CDA) linked to two 2‐hydroxyethyl methacrylate (HEMA) group was the crosslinking agent (CA) used for hydrogel preparations. The hydrogels were characterized by differential scanning calorimetry and FT‐IR. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). A model drug, olsalazine [3,3′‐azobis (6‐hydroxy benzoic acid)] (OSZ) as an azo derivative of 5‐aminosalicylic acid (5‐ASA), was entrapped in these gels and the in‐vitro release profiles were established separately in both enzyme‐free SGF and SIF. The drug‐release profiles indicated that the amount of drug released depended on the degree of swelling. The swelling was modulated by the amount of crosslinking of the polymer bonded drug (PBDs) prepared. Based on the great difference in hydrolysis rates at pH 1 and 7.4, these pH‐sensitive hydrogels appear to be good candidates for colon‐specific drug delivery.     

Neue Kupferkomplexe mit Phosphaalkenliganden. Molekülstruktur von [Cu{P(Mes*)C(NMe2)2}2]BF4 (Mes* = 2,4,6‐tBu3C6H2)

New Copper Complexes Containing Phosphaalkene Ligands. Molecular Structure of [Cu{P(Mes*)C(NMe₂)₂}₂]BF₄ (Mes* = 2,4,6‐tBu₃C₆H₂) Reaction of equimolar amounts of the inversely polarized phosphaalkene tBuP=C(NMe₂)₂ ( 1a ) and copper(I) bromide or copper(I) iodide, respectively, affords complexes [Cu₃X₃{μ‐P(tBu)C(NMe₂)₂}₃] ( 2 ) (X =Br) and ( 3 ) (X = I) as the formal result of the cyclotrimerization of a 1:1‐adduct. Treatment of 1a with [Cu(L)Cl] (L = PiPr₃; SbiPr₃) leads to the formation of compounds [CuCl(L){P(tBu)C(NMe₂)₂}] ( 4a ) (L = PiPr₃) and ( 4b ) (L = SbiPr₃), respectively. Reaction of [(MeCN)₄Cu]BF₄ with two equivalents of PhP=C(NMe₂)₂ ( 1b ) yields complex [Cu{P(Ph)C(NMe₂)₂}₂]BF₄ ( 5b ). Similarly, compounds [Cu{P(Aryl)C(NMe₂)₂}₂]BF₄ ( 5c (Aryl = Mes and 5d (Aryl = Mes*)) are obtained from ArylP=C(NMe₂)₂ ( 1c : Aryl = Mes; 1d : Mes*) and [(MeCN)₄Cu]BF₄ in the presence of SbiPr₃. Complexes 2 , 3 , 4a , 4b , and 5b‐5d are characterized by means of elemental analyses and spectroscopy (¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR). The molecular structure of 5d is determined by X‐ray diffraction analysis.     

Effect of the Electrode Potential on the Oxygen Reaction Rate in the Electrode System O2, Au/La0.88Sr0.12Ga0.82Mg0.18O2.85

The polarization dependences of a porous gold electrode in contact with a solid electrolyte of the composition La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 are studied at 600–800°C and oxygen pressures of 2 × 10⁻²-1 atm. It is shown that the rate of cathodic reduction of oxygen out of the gas phase depends on the preliminary treatment of the sample. The activation energy is equal to 110–135 kJ mol⁻¹ at a low polarization. After increasing the polarization, the activation energy for the cathodic reduction of oxygen equals 75–85 kJ mol⁻¹ and depends on the oxygen pressure as a power function with a power index of 1/4. The rate of the anodic evolution of oxygen is dependent neither on the preliminary treatment of the sample nor on the oxygen pressure in the gas phase and the polarization curve has a characteristic segment, which corresponds to a limiting overvoltage.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 954–962.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Beresnev.