The structure of fullerene films and their metallocene doping

Hexagonal close-packed (HCP) C₆₀ and C₇₀ films have been prepared by the Langmuir method and examined by electron microscopy and electron-diffraction analysis. It has been shown that the vacuum deposition of a C₆₀+C₇₀ mixture results in the formation of a film with small sized grains and a distorted C₆₀-HCP structure. The simultaneous deposition of C₆₀ and ferrocene results in the formation of a film with a changed morphology and an electron-diffraction pattern that contains a variable amount of ferrocene depending on the experimental conditions. The electron-diffraction pattern corresponds to the presence of the known molecular complex C₆₀[(C₅H₅)₂Fe]₂. The analogous simultaneous deposition of fullerene C₆₀ and cobaltocene results in the formation of a C₆₀ film stable in air and water, which contains carbon and cobalt (from the data of X-ray fluorescence, electron microscopy and microdiffraction). It has a different morphology and different diffraction patterns than pure C₆₀ films and, depending on the cobaltocene content (relative to that of fullerene), appears to be a fullerite film doped with various amounts of cobaltocenium fullende, which is an ionic compound.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1379–1383, August, 1994.The work was financially supported by the Russian Foundation for Basic Research (Projects 93-03-4676 and 93-03-18368).     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Phase separation of symmetrical polymer mixtures in thin-film geometry

Monte Carlo simulations of the bond fluctuation model of symmetrical polymer blends confined between two neutral repulsive walls are presented for chain lengthN _A=N _B=32 and a wide range of film thicknessD (fromD=8 toD=48 in units of the lattice spacing). The critical temperaturesT _c (D) of unmixing are located by finite-size scaling methods, and it is shown that , wherev ₃0.63 is the correlation length exponent of the three-dimensional Ising model universality class. Contrary to this result, it is argued that the critical behavior of the films is ruled by two-dimensional exponents, e.g., the coexistence curve (difference in volume fraction of A-rich and A-poor phases) scales as , where ₂ is the critical exponent of the two-dimensional Ising universality class ( ₂=1/8). Since for largeD this asymptotic critical behavior is confined to an extremely narrow vicinity ofT _c (D), one observes in practice effective exponents which gradually cross over from ₂ to ₃ with increasing film thickness. This anomalous flattening of the coexistence curve should be observable experimentally.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

The studies of the effect of photostimulated changes in thin carbon films

Photostimulated changes in thin carbon films deposited onto fused silica substrates by reactive magnetron sputtering and irradiated by the light of the first (1060nm) and the second (530nm) harmonics of a QW-switched Nd³⁺ AVG laser were investigated. The changes are supposed to be connected with the reordering of chemical bounds.     

SAXS对NLO芪唑盐LB薄膜稳定性的研究

具有优良NLO性质的芪唑盐(记为S)已被用于制备LB薄膜,但其成膜性不好,稳定性差;S和花生酸镉(记为A)的混合系虽可改善成膜性,但在此混合膜系中,S相的稳定性仍然不佳。应用SAXS和微机模型拟合(MCMI)研究了上述两类LB薄膜的凝聚态结构,结果指出:在LB薄膜的二维类晶系结构中,S分子中呈哑铃形的芪唑基倾向于作倾斜状的密堆砌,S分子中的丙条脂肪链则倾向于采取全反式燕尾式构象,而且脂肪链只占S分子长的2/3,这就导致了S分子在二维类晶系结构中凝聚力的下降,以及造成LB薄膜层状超分子结构的破坏和崩塌。     

聚酰亚胺光控取向膜的研究现状

用线性偏振紫外光照射聚酰亚胺膜可以诱导液晶取向。本文对四种聚酰亚胺光控取向膜进行了详细的概述，并简述了这种光控取向膜的机理及未来应用。     

Organic molecular beam deposition of oligophenyls on Au111: A study by X-ray absorption spectroscopy.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy has been applied to reveal the molecular arrangement of ultrathin oligophenyl films [p-quaterphenyl (4P) and p-hexaphenyl (6P)] on Au(111). In the half-monolayer films the molecules lie flat on the surface but still have a considerable inter-ring twist of 30 degrees -40 degrees , similar to the gas-phase conformation. In the saturated monolayer film the second half of the molecules is side-tilted by an angle of less than 66 degrees with respect to the surface. This arrangement is already similar to that in bulk net planes of thicker films parallel to the surface, that is, the 4P(211) and 6P(21-3) planes, respectively.     

The effect of nanosized titania-silica film composition on the photostability of adsorbed methylene blue dye

The effect of nanosized porous films (average density 10 g/m²) of TiO₂. TiO₂/SiO₂, and SiO₂ on the photostability of adsorbed methylene blue (MB) dye during UV irradiation in air was investigated by optical spectroscopy and laser-induced mass spectrometry. The effectiveness of the photodecomposition of MB decreases in the order TiO₂ > TiO₂/SiO₂ > SiO₂ with rate constants 1E-2, 0.6E-2, and 0.3E-2 min⁻¹ respectively. A mechanism including the participation of both excited states of the dye molecules and photoexcited titanium dioxide is proposed for the photodecolorization of MB adsorbed on the surface of the investigated films. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 220–225, July–August, 2007.     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.