Spectroscopic and Electrochemical Characterization of Cytochrome P450st‐DDAB Films on a Plastic‐Formed Carbon Electrode

We have studied the characterization of thermophilic cytochrome P450 (P450st)‐didodecyldimethylammonium bromide (DDAB) films by using UV‐vis absorption, resonance Raman spectroscopy, and electrochemical methods. The observed Raman spectrum indicated near‐native conformation of the heme iron in DDAB film on the surface of a glass slide, while on the surface of a plastic‐formed carbon (PFC) electrode, the conformation of P450st‐DDAB was very similar to that of heme‐DDAB film, suggesting the release of heme from P450st in DDAB films on PFC electrodes. When NaBr was added as salt to the casting solution, the result of Raman spectrum indicated near‐native conformation of P450st in DDAB film even on the PFC electrode, but no redox potential of P450st which has near native structure was observed. This study suggests the essential experimental conditions when working with heme protein‐DDAB films as, in some cases, heme iron from proteins is released on the surface of the electrode.     

Synthesis of photoreactive polyimide having indan structure

Polyimide containing an indan unit and alkyl moiety with a high molecular weight was prepared from 5,7‐diamino‐1,1,4,6‐tetramethylindan and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride. This polyimide was amorphous and soluble in common organic solvents, such as tetrahydrofuran, chloroform, and cyclopentanone. Thermogravimetry of the polyimide showed good thermal stability, indicating that a 10% weight loss of the polyimide was observed at 500 °C in nitrogen. The glass‐transition temperature of the polyimide was not observed by DSC measurement between room temperature and 400 °C at a heating rate of 10 °C/min (Apparatus: DSC3100 MAC Science Co., Ltd.). Transparency of the polyimide at 365 nm was 80%. The polyimide acted as a photosensitive resist of negative type by UV radiation. The resist had a sensitivity of 31 mJ/cm² and a contrast of 2.3 when it was developed with cyclopentanone at room temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 423–428, 2002     

Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.     

Structural and Optical Properties of Sol-Gel Derived Aluminosilicate Planar Waveguides Doped with Er3+ Ions

Er3+ doped-aluminosilicate thin films were prepared on silica and silica/Si substrates by the sol-gel process and dip-coating. The sol-gel aluminosilicate planar waveguides were prepared from silicon and aluminium alkoxides. Their structural characterization has been carried out by Raman spectroscopy, Atomic Force and Scanning Electron Microscopies. The results indicated that these films present an amorphous structure until an annealing temperature of 900°C, while at temperatures higher than 1000°C, crystallization occurs. An estimate of microcrystallite sizes using Raman spectroscopy is given, which agrees with data from scanning electron microscopy. The optical properties have been investigated by Fluorescence spectroscopy in the visible region.     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Thermal analysis of Vectran® fibers and films

Vectra^® liquid crystalline polymers (LCP's) were introduced as commercial products in the mid-1980's. The first of these (Vectra A130) was a wholly aromatic thermotropic copolyester ofp-hydroxybenzoic acid and 6-hydroxy-2-naphthoic acid. Vectra A130 is a thermotropic LCP that can be melt spun into filaments that on heat treatment are characterized by high strength and high modulus. Vectra resin can also be extruded into films. In the fiber or film form this material is commercially known as Vectran^®. Heat treatment enhances the tensile strength of Vectran fiber variants. Because of this, the elucidation of the physical transformations taking place in the internal structure of the material during heating has always been an important subject. Several thermal techniques are used to indicate clearly that what is observed as a glass transition is unlike the conventional glass transition in typical semicrystalline polymers. There is also an indication of the presence of multiple states of mesophase aggregation that collapse into a single state when taken to high enough temperatures.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Heterometallic lead-titanium oxyalkoxide precursors to lead titanate thin films

Two lead titanium oxyalkoxides with composition Pb₂Ti₄O₂(O₂CCH₃)₂(OC₂H₅)₁₄ and Pb₂Ti₂O₂(O₂CCH₃)₂(OCH(CH₃)₂)₈ have been isolated and characterised by elemental analysis, IR, ²⁰⁷Pb NMR and molecular weight measurements. X-ray structural analysis of the 1:2 complex confirmed the presence of two Pb₂Ti₂O units which are linked by a common Pb···Pb edge and are held together by alkoxide and acetate bridges. The acetate groups have migrated from the Pb to the Ti centres during the reaction. Hydrolysis of the 1:1 Pb/Ti complex produced clear gels providing the H₂O/complex ratio was less than 4. Heat treatment of the gel results in loss of residual organics below 400°C. The XRD pattern indicates the presence of the pyrochlore and perovskite phases after heating at 500°C but the sample is poorly crystalline. Complete conversion to the perovskite phase of lead titanate occurs on heating to 600°C for 1 hour. Thin films of lead titanate were deposited by dip-coating a solution of this complex in isopropanol. Analyses of the films, carried out using electron microprobe, Scanning Auger Spectroscopy and Rutherford Backscattering, indicated that they were of excellent quality, crystalline after heating at 600°C and with relatively sharp substrate-coating interface.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.