Electrical properties and Schottky diodes using N-N′diphenyl-1-4phenylenediamine

Thin films of, N-N′diphenyl 1-4phenylene-diamineane are prepared using vacuum sublimation technique. The electrical conductivity from room temperature down to 127 K is studied. It is found that the conduction of charge carriers obeys T^−1/2 dependence on temperature. The average hopping distance, hopping energy, density of states and their variation due to post-deposition heat treatment are studied. Schottky diodes are fabricated with gold as ohmic contact and aluminium as Schottky contact. From the observed current voltage characteristics the saturation current density, diode ideality factor and the barrier height are determined. Their variation with air annealing is also investigated.     

Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

狭缝式高速摄影机胶片的计算机判读

根据狭缝摄影机胶片的成象原理,运用数字图象处理技术,对狭缝式高速摄影机胶片判读工作的计算机化进行研究.应用结果表明,该技术先进实用,极大地提高了判读的精度和效率,将是这种胶片判读技术的发展方向.     

紫外光电材料ZnO的反应溅射制备及研究

采用直流反应溅射法分别在Si(111),Si(001),及K4玻璃衬底上制备ZnO薄膜,研究了氧氩比、衬底温度以及退火处理对于晶体结晶质量的影响,发现生长过程中的退火处理提高了薄膜质量和晶面取向.通过优化生长条件,在衬底温度为350℃,氧氩比为1:2的条件下生长出了XRD半高宽为01°、C轴取向高度一致的ZnO薄膜.     

模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。     

辉光等离子体辅助化学气相沉积低温合成金刚石薄膜的研究

采用辉光放电等离子体增强化学气相沉积 (GP CVD)技术在低温条件下合成了高品质的亚微米金刚石薄膜 ,并通过对合成过程的实时发射光谱诊断确定了 [CH4 H2 ]系统参与金刚石合成反应的主要荷能粒子。对合成过程的研究表明 :采用这种技术能使电子增强热丝化学气相沉积 (EACVD)合成高品质金刚石薄膜的温度从 85 0℃降至 (340± 5 )℃ ;薄膜低温合成中的主要荷能粒子为CH3 、CH ,CH+ 、H 等 ,其中过饱和原子氢保证了高品质金刚石薄膜的合成 ;根据光诊断和探针测量的结果推断近表面辉光放电可在基片表面形成电偶极层 ,该偶极层是进行超常态反应的必要环境 ,并在低温合成中起重要作用     

Influence of surface ordering on the wetting of structured liquids

The substrate is shown to induce substantial ordering in diblock copolymer thin films above the bulk order-disorder transition (ODT) where, thermodynamically, a phase mixed state is favored. Initially, uniform films reorganize to form a hierarchy of transient surface patterns and stable film thicknesses that depend on the initial film thickness and on the substrate. Self-consistent field calculations of the free energy of the system for different situations, depending on the relative tendency for the different block components to be attracted to the substrate and/or free surface, provide an explanation of the formation of the stable film thicknesses. A continuum picture proposed earlier by Brochard et al.rovides an explanation of the wetting characteristics of this system. In some cases the ordering destabilizes the film so that dewetting occurs (wetting autophobicity), whereas in other cases the surface ordering results in a kinetic stabilization of a film that would otherwise dewet. Received 3 August 2001 and Received in final form 1 November 2001     

Probing antiferromagnetic order with heat capacity in exchange-biased structures

We explore the magnetic heat capacity in exchange-biased ferromagnet/antiferromagnet bilayers theoretically. We show that changes in the antiferromagnetic structure due to the reversal of the ferromagnet layer can be detected by distinct features in the heat capacity. This offers a method for probing antiferromagnetic domains in exchange-biased systems.