两性淀粉接枝共聚物在中性抄纸中的应用

为考察两性淀粉与丙烯酰胺接枝共聚及阳离子合成的具有功能化、网络化的多元变性淀粉对纸张的增强效果,采用废纸浆为原料,在中性抄纸条件下,对该多元变性淀粉的增强应用性能进行了研究。结果发现,两性淀粉与丙烯酰胺接枝共聚物(AS-g-PAM)及其阳离子化的衍生物(AS-g-CPAM)比两性淀粉具有更好的增强效果,尤其可大幅度提高纸张的环压强度。与两性淀粉比较,用量为0.5%AS-g-PAM和AS-g-CPAM可分别提高环压指数22%和45%以上,对纸张的抗张指数、耐破度等也比使用两性淀粉有不同程度的提高,同时,AS-g-CPAM在0.05%的低用量时,仍具有较好的增强效果。     

Cation exchange membranes by pre-irradiation grafting of styrene into FEP films. II. Properties of copolymer membranes

The structure and some physico-chemical properties of radiation grafted FEP-g-polystyrenesulfonic acid proton exchange membranes were studied as a function of the degree of grafting. The distribution of grafted polymer across the membrane thickness was obtained from microprobe measurements. It was found that for low levels of grafting (ca. 3%), polystyrene chains are located near the membrane surface only, and the interior of the membrane remains ungrafted. With the increasing degree of grafting, polystyrene chains were incorporated into the interior of the membrane as well. An almost homogeneous distribution of grafts in the membrane was obtained at a graft level of > 13%. The influence of the degree of grafting on membrane properties, such as ion exchange capacity, swelling, and specific resistivity was studied. Three different states of water, viz., freezing free, freezing bound, and nonfreezing water have been identified in noncrosslinked membranes. However, the nature and the amount of crosslinker had a profound influence on the states of water in a membrane. © 1996 John Wiley & Sons, Inc.     

Electrochemical Determination of Lead(II) in Environmental Waters Using a Sulfydryl Modified Covalent Organic Framework by Square Wave Anodic Stripping Voltammetry (SWASV)

A novel sulfhydryl-modified covalent organic framework was designed for the selective determination of lead(II) using square wave anodic stripping voltammetry. The introduction of sulfhydryl groups enhanced the selectivity and sensitivity of the covalent organic framework for analytes. The sulfhydryl-modified covalent organic framework was characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Under the optimized conditions, a sulfhydryl-modified covalent organic framework/gold electrode was successfully used for the determination of lead(II) in water samples. The newly developed square wave anodic stripping voltammetry method exhibited wide linearity (0.05 to 20?ng mL^?1, r?=?0.991), a low limit of detection (0.015?ng mL^?1) and good precision, with a relative standard deviation values <5.1%. The limit of detection was lower than 10?ng mL^?1, the level of lead(II) in drinking water permitted by the World Health Organization. The recoveries of three spiked samples ranged from 90.0% to 104.0%, with relative standard deviations <4.9%. Satisfactory reproducibility and good repeatability demonstrated that the newly developed method is very suitable for the detection of lead(II) in real water samples, with significant advantages over existing methods.     

室温离子液体法合成新型三维共价有机骨架材料

采用室温离子热法合成了一种氟取代的具有五重贯穿金刚石拓扑结构的三维共价有机骨架材料(COFs), 记为JUC-515. 与高温溶剂热法不同的是, 室温离子液体法具有反应温度和压力低、 反应时间短、 操作简单、 无需催化剂和不产生有机蒸汽污染等优势. 制备的材料具有高度结晶性、 较大的孔隙率和良好的CO₂选择性吸附性能.     

嫁接Al改性MCM-41介孔分子筛催化合成双酚F

以十六烷基三甲基溴化铵和正硅酸乙酯为原料,合成纯硅MCM-41介孔分子筛。 再利用九水硝酸铝为改性剂来嫁接改性纯硅MCM-41介孔分子筛,NH3-TPD结果表明,嫁接后的AlMCM-41产生了中强酸。 用改性后不同n(Si)/n(Al)的AlMCM-41催化合成双酚F,在n（苯酚）/n（甲醛）=30、反应时间5 h、反应温度90 ℃、m（甲醛）/m（AlMCM-41）=7的反应条件下,在一定范围内,双酚F的产率随Al含量增加而增加,但在n（Si）/n（Al）＜50时,双酚F的产率反而下降,当n（Si）/n（Al）=50时,双酚F的产率最高,为42.28%。     

改性炭黑-LaMnO3复合材料的制备及其共价复合效应对氧还原性能的影响

以VulcanXC-72炭黑为载体,通过对炭载体石墨化处理和表面化学修饰,将其与化学沉淀法制备的纳米级LaMnO₃颗粒共混,再经特定温度下煅烧,制备出改性炭黑-LaMnO₃复合材料.X射线光电子能谱和热重分析表明,当煅烧温度在300℃时,炭载体与LaMnO₃纳米颗粒之间形成了大量C-O-M（M=La,Mn）化学键.扫描电子显微镜和高分辨透射电子显微镜分析发现,纯相LaMnO₃纳米颗粒主要呈现短棒、三支棒或竹节棒的形貌特征,炭载体则为具有完整石墨层的空心球结构,LaMnO₃均匀分散在炭载体上.在25℃,1mol/LNaOH溶液中的电化学测试结果表明,成分比（LaMnO₃：C）为2：3的复合材料具有很高的氧还原电催化活性,氧还原反应电子数为3.81,中间产物H₂O₂产率为9.5%,其活性接近商业Pt/C催化剂（E-TEK）.高的氧还原电催化活性主要归因于LaMnO₃纳米颗粒与炭载体之间形成了大量共价键.     

卟啉共价有机框架化合物的研究进展

共价有机框架化合物(COFs)是一类新兴的具有多孔结构的晶态有机聚合物,在储存与分离、催化、能量转化等领域具有广泛应用。本文介绍了一类基于卟啉单元的COFs,从框架构筑及应用开发两方面综述了这类材料的研究进展。     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

共聚法和嫁接法制备二茂铁杂化介孔材料及其催化性能

 以桥联硅氧烷 1,1'-双[(2-三乙氧基硅基) 乙基]二茂铁 (BTEF) 和正硅酸乙酯为前驱体, 以十六烷基三甲基溴化铵为结构导向剂, 采用共聚法制备了二茂铁功能化的周期介孔有机硅烷材料 (PMO-Fc). 同时以 BTEF 为修饰剂, 以甲苯为分散剂, 采用嫁接法制备了 Fc-MCM-41 杂化介孔材料. 采用 N2 物理吸附、X 射线衍射、透射电镜和红外光谱等手段对材料进行了表征, 评价了其催化苯羟化反应活性. 结果表明, PMO-Fc 具有有序的二维六方形孔道结构, 较大的比表面积和孔体积, 在苯羟化反应中表现出比 Fc-MCM-41 更高的催化活性, 苯酚的选择性和收率分别为 65.3% 和 20.2%.     

壳聚糖-g-N-羧甲基-2-硫代-4，5-2H咪唑啉酮的制备及其抑菌性能

以2-溴乙酸、壳聚糖、2-硫代四氢咪唑啉酮为原料,合成了不同接枝率的壳聚糖-g-N-羧甲基-2-硫代-4,5-2H咪唑啉酮（CTS-g-CSIDZ）,并对其理化性质进行了考察。用络合滴定法测定了该聚合物对Cd²⁺,CrO4^2-,Fe³⁺,Cu²⁺,Pb²⁺等重金属离子的吸附作用;进行了聚合物的悬菌定量实验,测定了接枝聚合物对一系列细菌的抑制能力;采用失重法研究了合成的聚合物在1mol/L HCl溶液中对N80钢片腐蚀的抑制作用。结果表明,部分接枝的CSIDZ比小分子化合物具有更高的对测试的多数金属离子吸附作用的热稳定性;接枝CSIDZ具有较强的抑菌效果,最小抑菌浓度为5.10 g/L;接枝CSIDZ比小分子缓蚀剂具有更高的热稳定性,在90 ℃时对N80钢片的缓蚀效率仍然可以达到71.1％,且用量仅为小分子化合物CSIDZ的1/2。