基于“透过表面接枝”方式制备低分散性和高接枝密度聚合物刷的研究

"透过表面接枝"(grafting-through)是一种聚合物表面改性的新方法,可以显著改善传统grafting-from和grafting-to方法接枝工艺的缺陷,获得兼具高接枝密度和低分散性的聚合物刷产物.本文采用布朗动力学模拟方法,模拟研究了grafting-through方法接枝聚合物刷过程中的主控因素,从微观动力学角度阐明其特有的链增长趋同化效应是保持产物聚合物刷较低分散性的主因.引发效率在grafting-through中可显著提高,且产物聚合物刷的分子量呈现泊松分布.此外,反应中保持高的单体通量,可以同时实现产物聚合物较长的平均链长和较低的分散性,有利于制备性能优异的改性材料.该研究对深入理解grafting-through接枝过程的动力学主控因素,促进grafting-through技术的推广和工艺的改进具有一定的理论指导意义.     

Triazine interlinked covalent organic polymer as an efficient anti-bacterial agent

Herein, we report the synthesis of new covalent organic polymer comprising triazine and o-tolidine by solvothermal method. The formation of polymer was confirmed by Fourier transform infra red spectroscopy (FT-IR), cross polarization–magic angle spinning nuclear magnetic resonance (NMR), transmission electron microscopy, and scanning electron microscopy. Their antibacterial activity toward S. aureus (gram-positive) and P. aeruginosa (gram-negative) was assessed by the optical density measurements and direct contact method. These results have great significance toward the design of new porous polymers for antibacterial applications.     

酰胺连接的共价有机骨架的制备及其在水中高效光催化性能

光催化是将太阳能转换为化学能的绿色可持续发展途径,有望解决日益严重的能源危机和环境污染问题.在光催化过程中,半导体材料作为光催化剂,负责可见光的捕获、光生载流子的生成和传输以及氧化还原反应,在整个光催化系统中起着决定性的作用.共价有机骨架材料(COFs)是一类新兴的半导体光催化剂,已被证明在可见光诱导的水分解、二氧化碳还原、有机转化反应和水中污染物降解方面具有应用前景.然而,大部分COFs是通过可逆反应构筑的,在水中及苛刻条件下的稳定性差.因此,提升基于COFs的光催化剂在水相中的光催化活性和循环稳定性仍然面临巨大挑战.本文提出了一种新策略,即通过实现多重协同效应,设计和开发2D-COFs作为在水中的高效非均相光催化剂.通过后合成策略将亚胺键连接的2D-COFs氧化,制备了两种具有丰富三嗪结构单元的以酰胺键连接的2D-COFs(命名为COF-JLU18和COF-JLU19).结果表明,COF-JLU18和COF-JLU19具有高比表面积和孔体积,其比表面积分别为1156和541 m2/g;COF-JLU19具有比相似拓扑结构的亚胺COF-JLU17更好的水蒸气吸附性能.此外,COF-JLU19表现出了极高的化学稳定性,在水中、盐酸和氢氧化钠溶液中浸泡两天,其结构和结晶性均没有发生明显变化.由此可见,酰胺键不仅可以增加材料骨架的亲水性,还能够提高COFs对水的稳定性.本文制备的酰胺键连接的COF-JLU19材料,在光降解罗丹明B水溶液(RhB)反应中可以获得高达0.69 min?1的光降解速率常数,活性明显优于其他光催化剂,如C3N4等.COF-JLU19具有较好的催化活性主要归因于以下两方面:一方面,良好的亲水性和固有孔隙率之间的协同效应可以增强COFs在水中对染料的吸附能力,使其光催化活性得到有效提升;另一方面,高的结晶度和优秀的稳定性使酰胺键连接的COFs在多相光催化中实现稳定循环利用.为了扩展COFs的应用前景,本文还制备了一种基于酰胺键连接COFs的静电纺丝膜,在以太阳光为光源的光降解罗丹明B水溶液实验中表现出较高的光催化活性和重复使用性.综上,本文提出的多重协同效应为基于COFs的高效光催化剂的设计提供了一种有效策略.     

辐射接枝法制备膨化聚四氟乙烯杂化膜及其抗菌性表征

通过共辐射接枝的方法,将聚丙烯酸成功接枝到膨化聚四氟乙烯薄膜上. 采用NaBH₄还原吸附在接枝链上的银离子,在膜中原位负载银纳米粒子,制备了抗菌性ePTFE杂化膜. 杂化膜的SEM、XPS、XRD和TGA表征结果表明,负载的银纳米粒子粒径为几十纳米至100 nm. 而银纳米粒子的负载量可由聚丙烯酸的接枝率控制. 细菌平板计数法测试结果证明,所制备的杂化膜具有优异的抗菌性,对大肠杆菌的抗菌率高达100%.     

Covalent immobilization of Candida antarctica lipase B on nanopolystyrene and its application to microwave-assisted esterification

Nanopolystyrene was used as a solid support for the covalent immobilization of Candida antarctica lipase B (CalB) using the photoreactive reagent 1-fluoro-2-nitro-4-azido benzene (FNAB) as a coupling reagent. The obtained derivative was then used as a biocatalyst in a microwave assisted esterification experiment. Factors such as contact time, pH, and enzyme concentration were investigated during immobilization. The hydrolytic activity, thermal, and operational stability of immobilized-CalB were determined. The maximum immobilized yield (218 μg/mg support) obtained at pH 6.8 exhibited optimum hydrolytic activity (4.42 × 10³ mU p-nitrophenol/min). The thermal stability of CalB improved significantly when it was immobilized at pH 10, however, the immobilized yield was very low (93.6 μg/mg support). The immobilized-CalB prepared at pH 6.8 and pH 10 retained 50% of its initial activity after incubation periods of 14 and 16 h, respectively, at 60 ℃. The operational stability was investigated for the microwave assisted esterification of oleic acid with methanol. Immobilized-CalB retained 50% of its initial activity after 15 batch cycles in the microwave-assisted esterification. The esterification time was notably reduced under microwave irradiation. The combined use of a biocatalyst and microwave heating is thus an alternative total green synthesis process.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

The characterization of novel metal reinforced electro-dialysis ion exchange membranes, for water desalination, by attenuated total reflectance Fourier transform infrared spectroscopy mapping is presented in this paper. The surface of the porous stainless steel fibre meshes was treated in order to enhance the amount of surface oxide groups and increase the material hydrophilicity. Then, the metal membranes were functionalized through a sol–gel reaction with silane coupling agents to enhance the affinity with the ion exchange resins and avoid premature metal oxidation due to redox reactions at the metal–polymer interface. Polished cross sections of the composite membranes embedded into an epoxy resin revealed interfaces between metallic frameworks and the silane layer at the interface with the ion exchange material. The morphology of the metal–polymer interface was investigated with scanning electron microscopy and Fourier transform infrared micro-spectroscopy. Fourier transform infrared mapping of the interfaces was performed using the attenuated total reflectance mode on the polished cross-sections at the Australian Synchrotron. The nature of the interface between the metal framework and the ion exchange resin was shown to be homogeneous and the coating thickness was found to be around 1 μm determined by Fourier transform infrared micro-spectroscopy mapping. The impact of the coating on the properties of the membranes and their potential for water desalination by electro-dialysis are also discussed.     

硝酸根接枝诱导组装金红石相TiO2纳米束以增强光催化产氢（英文）

化石燃料的快速消耗加速了全球能源危机和环境污染等问题.光催化产氢直接利用清洁和可持续的太阳能实现向化学燃料的转化,因而成为一种有前景的技术.众多半导体光催化剂中,二氧化钛因其高光催化活性、稳定的化学性质、低成本和无毒等优势而被广泛用作分解水产氢的光催化剂.最近,金红石相TiO2纳米晶体在某些情况下被证明具有光催化的潜力,然而其光生电子-空穴对的快速复合显著抑制了光催化效率.表面修饰、构建异质结和负载助催化剂等策略被用来提高光生载流子的分离效率以减少复合损失,从而提升光催化活性.由于光催化反应通常发生在光催化剂的表面活性位点上,因此通过改善表面性质改变电荷转移途径对光催化活性具有重要影响.磷酸、硫酸、硼酸和盐酸等无机酸的修饰可以改变光催化剂的表面基团,分别通过促进表面羟基的形成和氧气的吸附以及改变表面电荷性质更有效地捕获空穴,实现光生电子和空穴的分离,有助于光催化降解有机污染物.然而,这种影响机制显然不适用于光催化产氢体系,目前对无机酸修饰用于分解水产氢的研究鲜有报道.因此,通过酸改性策略制备高效产氢的光催化剂仍然是一个相当大的挑战.本文利用硝酸诱导策略合成纺锤状金红石相二氧化钛纳米束(R-TiO2).首先,制备层状质子化钛酸盐(LPT)作为TiO2的前体,随后,加入浓硝酸以诱导向金红石相TiO2的转变,并组装形成纺锤状纳米束.对照实验显示,硝酸的酸化可以诱导LPT向金红石相TiO2的转变,而相同条件下浓硝酸后处理不会引起晶相的转变.纺锤形纳米束的形成源于,硝酸诱导R-TiO2沿(110)方向生长并彼此粘附,硝酸诱导组装过程成功在TiO2表面修饰上硝酸根,同时扩大了光吸收范围,有效减少了电荷复合损失.光催化产氢测试证明了R-TiO2光催化剂具有高效的产氢性能,产氢速率为402.4μmol h-1,是Degussa P25的3.1倍,并且显著高于未经浓硝酸处理的锐钛矿(52.0μmol h^-1)或金红石相(110.8μmol h^-1)光催化剂.为了说明表面硝酸根的影响,分别从晶体和化学结构、形态以及表面电荷性质方面比较了光催化反应前后的变化,结果表明,R-TiO2增强的光催化效率可归因于硝酸根基团的负场效应,有利于在表面上捕获带正电的质子以促进载流子分离,提高光催化产氢的效率.总之,本工作不仅对于发展表面修饰策略制备高效产氢光催化剂的研究具有重要意义,而且提出了一种不同于文献报道的无机酸影响机制.     

Cation exchange membranes by pre-irradiation grafting of styrene into FEP films. II. Properties of copolymer membranes

The structure and some physico-chemical properties of radiation grafted FEP-g-polystyrenesulfonic acid proton exchange membranes were studied as a function of the degree of grafting. The distribution of grafted polymer across the membrane thickness was obtained from microprobe measurements. It was found that for low levels of grafting (ca. 3%), polystyrene chains are located near the membrane surface only, and the interior of the membrane remains ungrafted. With the increasing degree of grafting, polystyrene chains were incorporated into the interior of the membrane as well. An almost homogeneous distribution of grafts in the membrane was obtained at a graft level of > 13%. The influence of the degree of grafting on membrane properties, such as ion exchange capacity, swelling, and specific resistivity was studied. Three different states of water, viz., freezing free, freezing bound, and nonfreezing water have been identified in noncrosslinked membranes. However, the nature and the amount of crosslinker had a profound influence on the states of water in a membrane. © 1996 John Wiley & Sons, Inc.