Synthesis and characterization of polyethylene film grafted with acrylic acid and diethyleneglycol-dimethacrylate

Acrylic acid (AA) and diethyleneglycol-dimethacrylate (DEGDM) are grafted onto 25 μm low-density radio-peroxided polyethylene. Monomer content is determined by exchange capacity measurements. Studies of electrical resistance and zero-current membrane potential allow for the determination of the influence of DEGDM on both the dissociation of grafted AA and the permselectivity of these so-obtained cation-exchange membranes. DEGDM, acting as a crosslinking agent, limits the AA degree of grafting, slightly increases the electrical resistance, but contributes to enhance the permselectivity. For example, when these grafted films are immersed in 3M NaCl aqueous solutions, the addition of DEGDM leads to an increase of the transport number of Na⁺ close to 20%. © 1993 John Wiley & Sons, Inc.     

Changes in the properties of HDPE fibers upon radiation grafting with acrylic acid

The morphology and the physical and mechanical properties of graft-modified polyethylene fibers have been studied. Two types of fibers, with the diameters of 10 μm (1.1 dtex) and 40 μm (7.5 dtex), were modified by radiation-induced grafting with acrylic acid. The extent of grafting was determined gravimetrically. Confirmation of gravimetrically obtained values was achieved using conductometric titration. The fibers were hydrated at pH 2 and pH 7. The degree of swelling was 120% at pH 2 and 200% at pH 7. The transversal distribution of polyacrylic acid in the fibers was determined. Fibers were stained and observed with an optical microscope. The diffusion of the monomer into the bulk was found to be rather fast. The changes in the total crystalline content and the lamellar thickness distributions in consequence of irradiation and grafting were determined by differential scanning calorimetry analysis. The measurements showed no effects of irradiation on the crystallinity in either type of fiber, whereas a decreasing crystallinity caused by grafting was noticed in the 40 μm fibers. The lamellar thickness distributions narrowed upon irradiation, indicating recrystallization as a result of chain scission. Wide angle x-ray scattering and Raman analysis of dry and hydrated fibers were conducted to study the behavior of the fibers in an aqueous environment. These results both showed a decreasing crystalline content caused by fiber hydration. Tensile tests were carried out to evaluate how grafting, hydration and Ca²⁺-crosslinking of grafts affected the fiber strength. Grafting and Ca²⁺-crosslinking, as well as hydration, resulted in a decreasing E-modulus for the 40 μm fibers, whereas no significant change could be noticed in the 10 μm fibers. © 1995 John Wiley & Sons, Inc.     

Progress in Computer Simulation of Bulk,Confined, and Surface‐initiated Polymerizations

In this article we provide a brief summary of computational techniques applied to investigate polymerization reactions in general, with a focus on systems under confinement and initiated from surfaces. We concentrate on two major classes of techniques, i.e., stochastic methods and molecular modeling. We describe the major principles of the two classes of methodologies and point out their strengths and weaknesses. We review a variety of studies from the literature and conclude with an outlook of these two classes of computer simulation approaches as they are applied to “grafting from” polymerizations.

     

Surface functionalization of multiwalled carbon nanotubes by the photo‐responsive strategy of π‐π stacking and azide‐grafting

In this communication, we report a new, simple, and eco‐friendly method to develop highly dispersible multiwalled carbon nanotubes (MWCNTs) by π‐π stacking and azide‐grafting. MWCNTs were functionalized via standard physisorption, followed by nitrene addition using azido compounds upon ultraviolet activation. The functionalized MWCNTs show excellent dispersibility without raising distinct damage, which can bear comparison with that of MWCNTs oxidized with mixture acids. This method allows for the improvement of the chemical compatibility of MWCNTs with specific polymers for application in nanotube‐based composites and opens a potential pathway for surface protection.     

New acrylamide‐based monomer containing metal chelating units: Homopolymer grafted magnetite nanoparticles via ATRP for the magnetic removal of Co(II) ions

In this research, we synthesized and characterized a new acrylamide‐based monomer containing pyridine and 1,3,4‐oxadiazole moieties, N‐(4‐(5‐(pyridin‐2‐yl)‐1,3,4‐oxadiazol‐2‐yl)phenyl)acrylamide (POPA). Poly(POPA)‐grafted magnetite nanoparticles were then obtained via surface‐initiated atom transfer radical polymerization. The grafted nanoparticles were characterized by Fourier transform infrared analysis, scanning electron microscopy, wide angle X‐ray diffraction, and vibrating sample magnetometry. The amount of the grafted polymer was 126 mg/g, as calculated from thermo gravimetric analysis experiment. The capability of poly(POPA)‐g‐magnetite nanoparticles (MNPs) to remove Co(II) cations, under optimal time period, pH and adsorbent mass, was shown by atomic absorption. The adsorption kinetics obeyed the pseudo–second‐order kinetic equation, and the adsorption isotherm was best described by the Freundlich model with a maximum adsorption capacity of 59.90 mg/g. In addition, the poly(POPA)‐g‐MNPs were regenerated by simply washing with an aqueous 0.1M HCl solution, and no considerable decrease was observed in the extraction efficiency following the test of up to 7 cycles. These findings suggest that poly(POPA)‐g‐MNPs are stable and reusable adsorbent, and they could be potentially applied to water treatments for an efficient removal of Co(II) cations.     

Rapid and scalable synthesis of chiral bromolactones as precursors to α-exo-methylene-γ-butyrolactone-containing sesquiterpene lactones

The sesquiterpene lactones cover a diverse and pharmacologically important diversity space. In particular, the electrophilic α-exo-methylene-γ-butyrolactone moiety that is preponderant in this natural product family has been shown to readily engage in covalent inhibition via conjugate addition of cysteine residues in target proteins. However, the synthetic accessibility of sesquiterpenes or related probes to investigate their mode of action remains laborious. Herein, we present a rapid and scalable route to chiral bromolactones as enabling precursors in the synthesis of sesquiterpene lactones.     

Oxidation-Reduction Molecular Junction Covalent Organic Frameworks for Full Reaction Photosynthesis of H2O2

The full reaction photosynthesis of H₂O₂ that can combine water-oxidation and oxygen-reduction without sacrificial agents is highly demanded to maximize the light-utilization and overcome the complex reaction-process of anthraquinone-oxidation. Here, a kind of oxidation-reduction molecular junction covalent-organic-framework (TTF-BT-COF) has been synthesized through the covalent-coupling of tetrathiafulvalene (photo-oxidation site) and benzothiazole (photo-reduction site), which presents visible-light-adsorption region, effective electron-hole separation-efficiency and photo-redox sites that enables full reaction generation of H₂O₂. Specifically, a record-high yield (TTF-BT-COF, ≈276 000 μM h⁻¹ g⁻¹) for H₂O₂ photosynthesis without sacrificial agents has been achieved among porous crystalline photocatalysts. This is the first work that can design oxidation-reduction molecular junction COFs for full reaction photosynthesis of H₂O₂, which might extend the scope of COFs in H₂O₂ production.     

A Dicyanomethyl Radical Conjugated with a Pyridylamino Group: Combining Radical-based Dynamic Covalent Chemistry and Coordination Chemistry

In this work, we aimed to develop a dicyanomethyl radical that undergoes both reversible C−C bond formation/dissociation and metal-ligand coordination reactions to combine dynamic covalent chemistry (DCC) based on organic radicals with coordination chemistry. We have previously reported a dicyanomethyl radical conjugated with a triphenylamine ( 1 ⋅) that exhibits a monomer/dimer equilibrium between the σ-bonded dimer ( 1₂ ). We designed and synthesized a novel dicyanomethyl radical with a pyridyl group as a coordination point ( 2 ⋅) by replacing the phenyl group of 1 ⋅ with a 3-pyridyl group. We showed that 2 ⋅ is also in an equilibrium with the σ-bonded dimer ( 2₂ ) in solution and has suitable thermodynamic parameters for application in DCC. 2₂ coordinates to PdCl₂ in a 2 : 2 ratio to selectively form a metallamacrocycle ( 2₂ )₂(PdCl₂)₂, and its structure was clarified by single crystal X-ray analysis. Variable-temperature NMR, ESR, and electronic absorption measurements revealed that ( 2₂ )₂(PdCl₂)₂ also undergoes the reversible C−C bond formation/dissociation reaction. Ligand-exchange experiment showed that 2₂ was liberated from ( 2₂ )₂(PdCl₂)₂ by the addition of another ligand with a higher affinity for Pd^II. This work demonstrated that DCC based on dicyanomethyl radicals works orthogonally to metal-ligand coordination reactions.     

Thermally Responsive Selenide-containing Materials Based on Transalkylation of Selenonium Salts

Covalent adaptable networks (CANs) possess unique properties as a result of their internal dynamic bonds, such as self-healing and reprocessing abilities. In this study, we report a thermally responsive C−Se dynamic covalent chemistry (DCC) that relies on the transalkylation exchange between selenonium salts and selenides, which undergo a fast transalkylation reaction in the absence of any catalyst. Additionally, we demonstrate the presence of a dissociative mechanism in the absence of selenide groups. After incorporation of this DCC into selenide-containing polymer materials, it was observed that the cross-linked networks display varying dynamic exchange rates when using different alkylation reagents, suggesting that the reprocessing capacity of selenide-containing materials can be regulated. Also, by incorporating selenonium salts into polymer materials, we observed that the materials exhibited good healing ability at elevated temperatures as well as excellent solvent resistance at ambient temperature. This novel dynamic covalent chemistry thus provides a straightforward method for the healing and reprocessing of selenide-containing materials.