Super-Oxidizing Covalent Triazine Framework Electrocatalyst for Two-Electron Water Oxidation to H2O2

Electrochemical two-electron water oxidation (2e WOR) is gaining surging research traction for sustainable hydrogen peroxide production. However, the strong oxidizing environment and thermodynamically competitive side-reaction (4e WOR) posit as thresholds for the 2e WOR. We herein report a custom-crafted covalent triazine network possessing strong oxidizing properties as a proof-of-concept metal-free functional organic network electrocatalyst for catalyzing 2e WOR. As the first-of-its-kind, the material shows a maximum of 89.9 % Faradaic Efficiency and 1428 μmol/h/cm² H₂O₂ production rate at 3.0 V bias potential (vs reversible hydrogen electrode, RHE), which are either better or comparable to the state-of-the-art electrocatalysts. We have experimentally confirmed a stepwise 2e WOR mechanism which was further computationally endorsed by density functional theory studies.     

Studies of interactions between silane coupling agents and cellulose fibers with liquid and solid-state NMR

The hydrolysis of three alkoxy-silane coupling agents, gamma-methacryloxypropyl trimethoxy silane (MPS), gamma-aminopropyl triethoxy silane (APS), and gamma-diethylenetriaminopropyl trimethoxy silane (TAS), was carried out in ethanol/water solutions (80/20 w/w) at different pH values and followed by 1H, 13C and 29Si NMR spectroscopy. Acidic media were found to stabilize the hydrolyzed forms. As expected, the formation of silanol groups was followed by their self-condensation to generate oligomeric structures, yielding, ultimately, solid homopolycondensated structures, as analyzed by 29Si and 13C high-resolution solid-state NMR. Hydrolyzed MPS in acidic media was then successfully adsorbed onto a cellulose surface and the ensuing substrates submitted to thermal treatment at 110-120 degrees C under reduced pressure, in order to create covalent bonds between cellulose and the coupling agent.     

Mechanical properties and deformation morphologies of covalently bridged multi-walled carbon nanotubes: Multiscale modeling

We formulate a multiscale modeling framework to investigate the deformation morphologies and energetics of covalently bridged multi-walled carbon nanotubes (MWCNTs). The formulation involves extending a previously established quasi-continuum model by incorporating the inter-wall bridging energy density function into the constitutive relations via message passing from fully atomistic simulations. Using the extended numerical model, we studied the mechanical responses of the 10-walled MWCNT with varying inter-wall bridge densities under torsion, bending, and uniaxial compression. Our simulation results show that the presence of inter-wall covalent bridges not only enhances the post-buckling rigidities of the MWCNTs, but also modifies the deformation morphologies and morphology pathways. For bending and uniaxial compression, we constructed in the space of bridge density and applied strain the deformation morphology phase diagram, where three phases, uniformly deformed phase, rippling pattern, and diamond-shaped pattern, are identified and separated by linear phase boundaries. We attribute the deformation phase transitions to the interplay of inter-wall and intra-wall interaction energies. The multiple shape transitions of MWCNTs and the elastic nature of the deformation suggest that MWCNTs can be designed as shape-memory nanodevices with tunable stabilities.     

Surface‐modified hydroxyapatite linked by L‐lactic acid oligomer in the absence of catalyst

A new surface modification method of hydroxyapatite nanoparticles (n‐HA) by surface grafting reaction of L ‐lactic acid oligomer with carboxyl terminal (LAc oligomer) in the absence of any catalyst was developed. The LAc oligomer with a certain molecular weight was directly synthesized by condensation of L ‐lactic acid. Surface‐modified HA nanoparticles (p‐HA) were attested by Fourier transformation infrared spectroscopy, ³¹P MAS‐NMR, and thermal gravimetric analysis (TGA). The results showed that LAc oligomer could be grafted onto the n‐HA surface by forming a Ca carboxylate bond. The grafting amount of LAc oligomer was about 13.3 wt %. The p‐HA/PLLA composites showed good mechanical properties and uniform microstructure. The tensile strength and modulus of the p‐HA/PLLA composite containing 15 wt % of p‐HA were 68.7 MPa and 2.1 GPa, respectively, while those of the n‐HA/PLLA composites were 43 MPa and 1.6 GPa, respectively. The p‐HA/PLLA composites had better thermal stability than n‐HA/PLLA composites and neat PLLA had, as determined by isothermal TGA. The hydrolytic degradation behavior of the composites in phosphate buffered saline (PBS, pH 7.4) was investigated. The p‐HA/PLLA composites lost their mechanical properties more slowly than did n‐HA/PLLA composites in PBS because of their reinforced adhesion between the HA filler and PLLA matrix. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5177–5185, 2005     

Properties of poly(dimethylsiloxane)/hydrogel multicomponent systems

The properties of surface‐ and bulk‐modified poly(dimethylsiloxane) (PDMS) were examined. Laser‐induced surface grafting of poly(2‐hydroxyethyl methacrylate) (PHEMA) on PDMS and a sequential method for preparation of interpenetrating polymer networks of PDMS/PHEMA were, respectively, used for surface and bulk modifications. The hydrogel content and water‐uptake capability of the modified samples were also investigated. The modified PDMS samples were examined by performing attenuated total reflection/Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, scanning electron microscopy, and water contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2145–2156, 2003     

Simple method for detection of extremely diluted anti beta-casein antibodies from glass bead based receptors

The current work describes the elaboration of a simple, sensitive and reliable β-casein modified glass beads, for the detection and quantification of its specific antibody anti β-casein. This is an elementary receptor without electronic part, developed by grafting glass bead surface with the antigenic β-casein via 3-aminopropyltriethoxy silane and then glutaraldehyde as cross-linker. The whole is realized by a classical process, called in two steps and in mild conditions where chemical protocol is optimized for β-casein use. The detection and quantification of the specific reaction antibody-receptor is carried out by the technique of the second antibody labeled with horse radish peroxidase (HRP). Our receptor can detect the β-casein antibody present in the serum at dilutions up to a factor 10⁷ in strong ionic strength medium. The same antibody of the same serum and in the same conditions can be detected by ELISA test at dilutions up to a factor 10⁵. The whole test, after our receptor realization, takes about 5 h.     

In situ physical or covalent trapping of phthalocyanine macrocycles within porous silica networks

An effective way of trapping phthalocyanines inside porous silica has been achieved when an aqueous solution of these macrocyclic species is reacted in situ with silicon alkoxide. The resultant porous gel network can encapsulate a myriad of metal phthalocyanine molecules at relatively high concentrations and, most importantly, in a disaggregated way. By employing this method metal sulfophthalocyanines of Fe, Co, Ni, Cu, Al, Eu or Sm can be encapsulated within SiO₂ xerogels. Here, the chemical entrapment of phthalocyanines inside silica gel pore networks is accomplished by the attachment of bifunctional groups to the walls of these substrates; while one of these moieties is directly linked to the macrocycle end groups, the other one is covalently bonded to the silanol groups resting on the SiO₂ walls. Furthermore, when the proper concentrations of phthalocyanine species, H₂O, silicon alkoxide, and HCl are reacted together, it is possible to obtain monolithic translucent silica xerogels. This latter property provides straightforward evidence of the innate fluorescence of the trapped macrocycles. The average size of the cavities encapsulating the macrocyclic molecules range from 2.0 to 3.6 nm; the precise size depends on the cation present in the complex and on the identity and position of the substituent groups at the periphery of the macrocycle. When the silica network is prepared from standard and/or organo-substituted alkoxides, the aggregation, degradation or stability of the macrocyclic species trapped in silica cavities depends on the nature of the alkyl group attached to the pore walls.     

Solid-Liquid Interfacial Engineered Large-Area Two-Dimensional Covalent Organic Framework Films

Constructing uniform covalent organic framework (COF) film on substrates for electronic devices is highly desirable. Here, a simple and mild strategy is developed to prepare them by polymerization on a solid-liquid interface. The universality of the method is confirmed by the successful preparation of five COF films with different microstructures. These films have large lateral size, controllable thickness, and high crystalline quality. And COF patterns can also be directly achieved on substrates via hydrophilic and hydrophobic interface engineering, which is in favor of preparing device array. For application studies, the PyTTA-TPA (PyTTA: 4,4′,4′′,4′′′-(1,3,6,8-Tetrakis(4-aminophenyl)pyrene and TPA: terephthalaldehyde) COF film has a high photoresponsivity of 59.79 μA W⁻¹ at 420 nm for photoelectrochemical (PEC) detection. When employed as an active material for optoelectronic synaptic devices for the first attempt, it shows excellent light-stimulated synaptic plasticity properties such as short-term plasticity (STP), long-term plasticity (LTP), and the conversion of STP to LTP, which can be used to simulate biological synaptic functions.     

Reversible Postsynthetic Modification in a Metal–Organic Framework

Postsynthetic modification (PSM) of metal–organic frameworks (MOFs) provides access to functional materials and advanced porous solid engineering. Herein, we report the reversible PSM of a multivariate isoreticular MOF by applying dynamic furan-maleimide Diels–Alder (DA) chemistry. The key step involves incorporating a furan group into the MOF via “click” PSM, which can then undergo repeated cycles of modification and de-modification with maleimides. The structural integrity, crystallinity, and porosity of the furan-appended MOF remained intact even after three consecutive PSM/de-modification cycles using three different functionalized maleimides.     

Dynamic Exchange in 3D Cell Culture Hydrogels Based on Crosslinking of Cyclic Thiosulfinates

Dynamic polymer materials are highly valued substrates for 3D cell culture due to their viscoelasticity, a time-dependent mechanical property that can be tuned to resemble the energy dissipation of native tissues. Herein, we report the coupling of a cyclic thiosulfinate, mono-S-oxo-4-methyl asparagusic acid, to a 4-arm PEG-OH to prepare a disulfide-based dynamic covalent hydrogel with the addition of 4-arm PEG-thiol. Ring opening of the cyclic thiosulfinate by nucleophilic substitution results in the rapid formation of a network showing a viscoelastic fluid-like behaviour and relaxation rates modulated by thiol content through thiol-disulfide exchange, whereas its viscoelastic behaviour upon application as a small molecule linear crosslinker is solid-like. Further introduction of 4-arm PEG-vinylsulfone in the network yields a hydrogel with weeks-long cell culture stability, permitting 3D culture of cell types that lack robust proliferation, such as human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs). These cells display native behaviours such as cell elongation and spontaneous beating as a function of the hydrogel's mechanical properties. We demonstrate that the mode of dynamic cyclic thiosulfinate crosslinker presentation within the network can result in different stress relaxation profiles, opening the door to model tissues with disparate mechanics in 3D cell culture.