阵列波导光栅波分复用/解复用器光谱响应效率的理论模型

基于单模光波导的本征模场分布,瑞利－索末菲衍射积分公式和天线原理的互易定理,给出耦合器中两个非接触平面光波导耦合特性的描述.基此,根据等光程差不等振幅多光束干涉的光场叠加原理,推导出新颖的阵列波导光栅波分复用/解复用器的光谱响应效率的解析函数表达式,这些表达式可为快速精确分析阵列波导光栅波分复用/解复用器的特性提供理论基础.同时,介绍了一个计算阵列波导光栅波分复用/解复用器特性的例子,给出其光谱响应度和信号通道串扰.     

Modeling ExB drift transport in conceptual slot divertor configurations

At DIII-D, a slot divertor concept, called small-angle-slot (SAS), is under development, aiming to enable detachment at relatively low plasma edge density. We report on simulations using the SOLPS-ITER two-dimensional edge code to examine the performance of conceptual “SAS 2” slot configurations. The focus of the analysis is on E  ×  B drift effects on upstream density at detachment (UDD), with detachment marked by electron temperature T_e ≤ 3 eV at the outer strike point (OSP). With toroidal field such that radial E  ×  B drift carries particles from the OSP towards the private flux region (PFR), placing the OSP near the inner slot wall gives ≈20% lower UDD than having the OSP near the outer wall. The inner wall effectively traps the radial E  ×  B drift flux, resulting in low T_e and associated radial electric field in the PFR, and thus small losses from the slot to the inner target via poloidal E  ×  B drift flux. With toroidal field reversed such that radial E  ×  B drift is reversed, OSP placement near the inner wall gives ≈10% lower UDD than OSP placement near the outer wall. Although radial E  ×  B flux is from the OSP towards the outer wall, this flux largely escapes the slot, raising the UDD. A change in the slot shaping is suggested with the goal of eliminating such E  ×  B -driven particle losses from the slot.     

光锥与TDI-CCD耦合监控中测试目标的一种实现方法

为了给光锥与时间延迟积分电荷耦合器件耦合监控装置提供有效的被测运动条纹,分析了传统推扫成像实验装置的不足之处,设计了电子显示目标滚屏运动装置.采用光学相机对印刷条纹静止成像,并用TDI-CCD数字相机对监视器屏幕上的运动条纹动态成像.实验结果表明,该方案解决了高分辨率的鉴别率图样无法在监视器或投影仪上精确显示的困难.与传统的实验室模拟装置相比,该方案提高了鉴别率条纹的运动稳定性,减小了条纹运动速率与TDI-CCD扫描行频间的失配误差,不仅能够对耦合过程实施监控,而且还能用于耦合系统的像质评价.     

CaCO3/PEEK复合体系的力学行为和热行为研究

以聚醚醚酮和碳酸钙复合体系为研究对象,考察了偶联剂和填料添加量对复合材料力学行为和热行为的影响.发现磺化聚醚醚酮作为偶联剂能有效地改善材料的力学性能,提高基体树脂的玻璃化转变温度,降低基体树脂的熔点,有助于改善聚醚醚酮的加工条件     

Pd–Co bimetallic nanoparticles supported on graphene as a highly active catalyst for Suzuki–Miyaura and Sonogashira cross-coupling reactions

Graphene (G) supported Pd–Co bimetallic nanoparticles (NPs) as a highly active catalyst was prepared by a chemical reduction method and used for coupling reactions. With the characterization of X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and Raman spectrum, the composition of resulting Pd–Co material was identified to be alloy structural. The Pd–Co (1:1)/G exhibited the highest catalytic activity for the Sonogashira-type coupling reactions and also exerted satisfied catalytic activity and recycle stability for Suzuki–Miyaura cross-coupling reactions. This Pd–Co/G material also possessed other advantages such as low-cost, easy recycled from reaction system by a magnet for their magnetic property, and easy experimental handling.     

四原子分子中Majorana算子矩阵元的新计算公式

李代数方法在研究双原子分子、三原子分子振－转光谱及相关问题等方面已被证明是一种有效方法[‘－0,并被成功推广到多原子分子[’－门．构造代数哈密顿量是此方法的关键,这就要求选择合适的     

光电解水制氢耦合生物质醇/醛氧化的研究进展

生物质醇/醛是一类重要的生物基平台化合物, 通过催化氧化重整可将其进一步转化为高值含氧化学品或燃料. 太阳能驱动的光电催化技术是实现生物质醇/醛氧化最为绿色高效的途径之一. 与传统光电解水制氢相比, 利用生物质醇/醛氧化来替代阳极析氧过程不仅可以提高阳极产物的附加值, 同时可以提升太阳能到氢能的转化效率. 因此, 光电解水制氢耦合生物质醇/醛氧化对绿氢提效降本和高值化学品合成具有重要意义. 本文综合评述了光电解水制氢耦合生物质醇/醛的氧化反应机理, 总结了目前光电催化技术在生物质醇/醛氧化方面的研究进展, 最后对该领域所面临的机遇和挑战进行了展望.     

金属光栅表面增强喇曼散射TE模的计算分析

以纳米量级金属履带矩形光栅为模型,研究了表面增强喇曼散射的特性.针对TE模的入射光,采用耦合波原理对金属表面的衍射场进行了讨论,并用数值计算方法讨论了光栅周期、光栅深度等参量对表面增强的影响以及增强因子随第一级瑞利系数的变化关系.结果表明：在入射光波长为700 nm、光栅周期p=400 nm、 光栅深度d=150 nm、占空比为1/3、入射角度为10°时,获得最大增强,增强因子G可达102.     

基于C语言的等效电子耦合原子态的编程计算

详述了用turboc2.0编程计算等效电子LS耦合原子态的方法,并给出了计算nf5电子组态的LS耦合原子态的具体程序.     

Analysis of Coupling and Radiation Properties for an Improved Dielectric Waveguide Directional Coupler Utilizing a Tapering Left-Handed Slab Core

The coupling and radiation characteristics of an improved dielectric waveguide directional coupler with a tapering left-handed slab core located in the coupling region are analyzed by the staircase approximation method, which combines the building block approach and multi-mode network theory with a rigorous mode-matching procedure. Particular attentions are directed toward the radiation characteristics under different structural parameters of the coupler. Numerical results indicate that the proposed coupler is very promising by shortening the coupling length significantly while keeping the radiation loss at a low level.