NMR parameters of the tetrahedrane [Fe2(CO)6(μ-SNH)], studied by experiment and DFT

The intramolecular dynamic behavior of the tetrahedrane-type cluster [Fe₂(CO)₆(μ-SNH)] 1 was studied by ¹³C NMR spectroscopy. The ⁵⁷Fe chemical shift of 1 and the coupling constants ¹ J(⁵⁷Fe,¹³C) were measured. These NMR parameters, and also ¹ J(⁵⁷Fe,¹⁵N), were found to be in good agreement with data calculated by using density functional theory (DFT) methods (B3LYP), based on the geometry calculated at the 6-311+G(d,p) level of theory. The isolobal replacement of the Fe(CO)₃ with BH fragments leads to the tetrahedranes [Fe(CO)₃(BH)(μ-SNH)] 2 and [(HB)₂(μ-SNH)] 3. Both were identified by calculations as minima on the respective potential energy surface (PES). However, the tetrahedrane-type structure of 3 is much higher in energy when compared with the planar cyclic isomers 3a and 3b.     

Stereoselective total synthesis of (S)-Virol C and (S)-1-dehydroxyvirol A

A stereoselective total synthesis of (S)-Virol C and (S)-1-dehydroxyvirol A has been developed, based upon the selective and sequential substitution of the two trimethylsilyl groups of readily available 1,4-bis(trimethylsilyl)-1,3-butadiyne.     

An iterative acetylene-epoxide coupling strategy for the total synthesis of longimicin C

Longimicin C, a naturally occurring annonaceous acetogenin possessing a C₂-symmetrical bis-THF moiety and a short hydrocarbon chain between its THF-containing region and a terminal γ-lactone, was synthesized for the first time. The total synthesis was successfully achieved by an iterative acetylene-epoxide coupling strategy. d-Mannitol was used to establish the bis-THF-containing segment, in which the additional stereochemistries were introduced by Sharpless dihydroxylations and intramolecular Williamson etherifications. Regioselective epoxide-openings by the appropriate terminal acetylenes allowed coupling and elaboration of all four fragments including the introduction of three essential hydroxyls into the proper sites of the target skeleton.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Coupling and Cyclization of Sydnone Compounds

Cyclization were occurred via the coupling reactions of some mercuric chloride derivatives of sydnone with LiPdCl₃-CuCl₂. A unique six-membered ring, 3,3′-ethylene-4,4′-bissydnone, was obtained by the cyclization reation of 1,2-di[3-(4-chloromercuric)sydnonyl]ethane. However, the seven-membered 3,3′-trimethylene-4,4′-bissydnone and 1,3-di[3-(4-chloro)sydnonyl]-propane were obtained from the corresponding mercuric chlroide of sydnone. Onyl substitution reaction took place when 4,4′-di[3-(4-chloromercuric)sydnonyl]biphenyl, 4,4′-di[3-(4-chloromercuric)sydnonyl]benzene, di(p-[3-(4-chloromercuric)sydnonyl]-phenyl}methane and, di(p-[3-(4-chloromercuric)sydnonyl]phenyl]ether were treated using the same process.     

A new approach to the synthesis of oligomers. Application to the synthesis of p-phenylene thioether wires

Oligothioethers 4-RC₆H₄(SC₆H₄-4)_nX (n = 1-3; X = Br, I; R = NO₂; X = Br; R = MeO. n = 1 and 2; X = I; R = MeO. n = 4; X = Br; R = NO₂) have been prepared through a process involving (i) palladium-catalyzed C-S coupling between 4-RC₆H₄(SC₆H₄-4)_n−1I and 4-BrC₆H₄SH to give 4-RC₆H₄(SC₆H₄-4)_nBr and (ii) copper-catalyzed replacement of Br by I.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

TM模场入射到金属光栅的表面增强喇曼散射计算分析

以纳米量级金属履带矩形光栅为模型,研究了表面增强喇曼散射的特性.针对TM模的入射光,采用严格的耦合波原理对金属表面的衍射场进行了分析,并用数值计算方法讨论了光栅深度、光栅占空比等参量对金属表面增强的影响以及增强因子随光栅深度的变化关系.结果显示：当入射光波长为700 nm、入射角度为10°、光栅周期p=600 nm、 光栅深度d=37.5 nm、占空比为1/3时,获得最大增强,增强因子G达104倍.