铁磁/ 反铁磁双层膜中交换偏置

铁磁/反铁磁交换偏置在巨磁电阻器件中具有重要的应用。引起了物理学及材料学等领域内广大科学家的浓厚兴趣，本文首先阐述了交换偏置的基本性质。然后简述了交换偏置的实验研究方法；最后，着重介绍了几种主要的理论模型。     

分布耦合系数对线性啁啾光栅色散的影响

本文从光栅反向耦合波方程出发,经相位共轭变换用Runge-Kuta-Gil方法对其数值求解。针对线性啁啾光栅耦合系数变化服从不同的分布,分析了各种分布对光栅反射谱特性和色散特性的影响。     

Na2SnO3系催化剂在甲烷氧化偶联反应中的催化性能及表面碱性的探讨

1982年Keller和Bhasin以金属氧化物为催化剂从甲烷制得少量乙烯和乙烷的工作引起了各国研究工作者的重视,此后报道了许多有研究价值的催化剂,其中添加碱金属对提高催化性能所起的作用引起了普遍的关注.Lunsford等首先用添加Li~+的MgO作催化剂,发现催化剂表面碱性增强的同时,生成C_2烃类产物的选择性明显增加.随后Iwamatu等在MgO中添加Na~+及Rb~+盐,Jones等在Mn~(4+)/SiO_2中添加Na~+,Otsuka等在Sm_2O_3中添加LiCl作为甲烷氧化偶联催化剂进行了研究,这些结果均表明,因添加碱金属使催化剂呈现     

毛细管电泳质谱联用技术及其应用

本文介绍了用于毛细管电泳质谱联用仪器的多种接口技术，描述了ＣＺＥ，ＣＩＥＦ，ＣＧＥ，ＭＥＫＣ和ＣＩＴＰ等毛细管电泳技术和四极质谱，离子阱质谱，傅 叶变换离子回旋共振质谱，飞行时间质谱，磁质谱，解吸质谱等联用的现状及发展前景，对近年来ＣＥ－ＭＳ在酶解产物。蛋白质和肽，核苷酸，药物及代谢产物等领域中的应用作了详细述评。     

Toward breast cancer resistance protein (BCRP) inhibitors: design, synthesis of a series of new simplified fumitremorgin C analogues

In this study, we report the design and synthesis of a series of new simplified fumitremorgin C analogues. The preliminary biological study indicated some of these simplified fumitremorgin C might be developed into breast cancer resistance inhibitors.     

Synthesis of new α,α,β,β-tetrafluoroesters

Substituted phenyl iodides or diiodides reacted with ethyl iodotetrafluoroproponylate ICF₂CF₂CO₂Et, 1 in the presence of copper powder to give the coupled products 2 or 3 in good yields. Addition of 1 to ethylene and allyl acetate proceeded smoothly under thermal and radical conditions to give the corresponding adducts, which underwent elimination reaction to give β-vinyl and β-allyl α,α,β,β-tetrafluoroesters, CH₂CHCF₂CF₂CO₂Et, 4 and CH₂CHCH₂CF₂CF₂CO₂Et, 5, respectively. 1 also readily reacted with 1,5-hexadiene and 1-hexene with copper or palladium complex, followed by reduction to remove iodine to produce ω-alkenyl-α,α,β,β-tetrafluoroester CH₂CH(CH₂)₄CF₂CF₂CO₂Et 6 and α,α,β,β-tetrafluoroester C₄H₉CH₂CHICF₂CF₂CO₂Et.     

Facile preparation of organozinc bromides using electrogenerated highly reactive zinc and its use in cross-coupling reaction

Highly reactive zinc was readily prepared by electrolysis of a DMF solution containing pyrene as a mediator with a platinum cathode and a zinc anode. Preferential reduction of pyrene occurred to generate the corresponding radical anion, which reduced zinc ions generated from anodic dissolution to give zero valent zinc with high reactivity. The reactive zinc was successfully used for an efficient transformation of bromoalkanes into the corresponding organozinc bromides. Organozinc bromides obtained were further used successfully in Pd-catalyzed cross-coupling reaction with various aryl iodides and bromides.     

Synthesis of new axially dissymmetric ligand with large perfluoroalkyl groups

A new axially dissymmetric ligand with large perfluoroalkyl groups, 2,2′-bis(1-hydroxy-1H-perfluorooctyl)biphenyl (1c), which could not be obtained by the coupling reaction of the aryl bromide using copper powder, was synthesized successfully by the coupling reaction using Ni(COD)₂. This ligand showed much higher asymmetric induction in the reaction of diethylzinc with benzaldehyde than the trifluoromethyl (1a) or pentafluoroethyl (1b) analogues.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Effects of coupling agents on mechanical and morphological behavior of the PP/HDPE blend with two different CaCO3

The main purpose of incorporating fillers, such as calcium carbonate, into blends of polyolefins is to decrease costs and change tensile and impact properties. Structural differences between both components give rise to the formation of large filler agglomerates in the polymer matrix, which influence the mechanical response of the material. Therefore, the coupling agents of the Lica 12 type at various concentrations was used to facilitate the link between filler and matrix (the latter consisting of PP/HDPE 80/20 wt). Filler was added to the PP/HDPE blend at a 30 wt.% concentration. Two types of calcium carbonate (CaCO₃) were used. These have different average sizes (3.0 and 1.8 μm) which were determined by means of laser diffraction techniques. In addition other coupling agents of the titanate type, such as Lica 09, Lica 01, zirconates ZN 12, and a 1:1 mixture of Lica 12 and Lica 01, were used. This study clearly demonstrated that the addition of the coupling agent to CaCO₃ modifies the mechanical properties of the PP/HDPE/CaCO₃ composites. Values of the mechanical properties indicate that due to its characteristics, each coupling agent gives rise to increases in a particular mechanical property. In the case of Lica 01 an increase was verified in Young’s modulus at 0.7 wt.% and in elongation at break at both concentrations (0.3 and 0.7 wt.%), whereas ZN 12 brought about an increase in elongation at break. The 1:1 mixture of Lica 12 and Lica 01 caused impact resistance of the blend of PP/HDPE with CaCO₃ to increase considerably.