Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

Catalytic Sandmeyer cyanation as a synthetic pathway to aryl nitriles

Aryl nitriles ArCN were obtained by the Cu(I)/Cu(II) catalysed reaction of aryl diazonium salts with KCN in good yields.     

Solid Phase Extraction and Simultaneous Spectrophotometric Determination of Trace Amounts of Copper and Iron Using Mixture of Ligands

 A novel sensitive and simple method for rapid and selective extraction, preconcentration and determination of iron (as its bathophenanthroline complex) and copper (as its neocuproine complex) using octadecyl silica cartridges and dual wavelength spectrophotometry is presented. The dual wavelength method (533 nm for the iron-bathophenanthroline and 454 nm for the copper-neocuproine as the analytical wavelength) is used to eliminate spectral interferences. Extraction efficiency and the influence of flow rates of sample solution and eluent, pH, amount of neocuproine, bathophenanthroline and hydroxylamine hydrochloride, type and least amount of eluent for elution of iron and copper complexes from cartridge, break-through volume and limit of detection are evaluated. The effects of various cationic and anionic interferences on percent recovery of iron and copper are also studied. Extraction efficiencies >95% are obtained by elution of cartridges with minimal amount of organic solvent. Iron and copper were determined in the range of 3–100 ng mL⁻¹. The limits of detection are 0.98 and 1.13 ng mL⁻¹ for iron and copper, respectively. The proposed method is applied successfully to the determination of both analytes in river, tap and well water samples. Author for correspondence. E-mail: yyamini@modares.ac.ir Received September 18, 2002; accepted December 12, 2002 Published online May 5, 2003     

Cis‐trans Isomerism in Copper(II) Complexes with N‐acyl Thiourea Ligands

The N‐acyl thiourea complexes bis[N,N‐diethyl‐N′‐(p‐nitrobenzoyl)‐thioureato]copper(II) ( 1a,1b ) and bis(N,N‐diphenyl‐N′‐benzoylthioureato)copper(II) ( 2a,2b ) crystallize in each case in two modifications. X‐ray structural analysis shows that 1a and 1b are cis‐trans isomers. This is very unusual for N‐acyl thioureato complexes because with exception of one platinum(II) complex up to now only cis complexes have been found. In contrast X‐ray structural analysis of both forms 2a and 2b of the other complex shows no cis‐trans pair. Both modifications are cis complexes. In solution both isomers of the copper(II) complexes are observable by EPR spectroscopy.     

Stereoselective adduct formation of α-acylcamphorato-copper(II) chelates with some chiral Lewis bases

The formation constants of the mono-adducts of α-acylcamphorato-copper(II) chelates such as (+)-Cu(facam)₂, (?)-Cu(facam)₂, (+)-Cu(hfbc)₂ and (?)-Cu(hfbc)₂ with some chiral Lewis bases were determined spectrophotometrically in benzene. In order to compare the adduct formation constants obtained with the (+)- and (?)-forms, some pairs of chiral Lewis bases such as 1-amino-2-propanol [(R)(?), (S)(+)], 1-(α-naphthyl)ethylamine [(R)(+), (S)(?)], α-phenyl ethylamine [(R)(+), (S)(?)] and also quinine and quinidine were examined as neutral ligands. Although not very pronounced, the effects of combinations obtained for (+)- or (?)-Cu(II) chelates and (+)- or (?)-ligands indicate that formation constants obtained by the formation of adducts with the ligands having different directions of the optical rotation seems to be superior to those with the same direction.     

An In Situ Copper Plated Boron‐Doped Diamond Microelectrode Array for the Sensitive Electrochemical Detection of Nitrate

The first example of using a copper microelectrode array for use in electroanalysis is explored and exemplified with the electroanalytical quantification of nitrate. The analytical approach is based upon the in situ deposition of copper at a boron‐doped diamond (BDD) microelectrode array. The immobilized copper layer is electrocatalytic for nitrate reduction and exhibits an analytically useful range from 1.2 to 124 μM with a marked selectivity for nitrate ion over nitrate, with a limit of detection of 0.76 μM. The analytical applicability was examined through standard addition determinations of nitrate in drinking and river water samples.     

溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

Cu(phen)2+2和Cu(bpy)2+2与6-巯基嘌呤、腺嘌呤相互作用的研究

在ｐＨ为７．０的磷酸盐缓冲溶液中，用荧光光谱、紫外光谱、电化学及紫外光谱电化学等方法研究了铜配合物与６－巯基嘌呤、腺嘌呤的相互作用．结果表明，Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤发生了相互作用，但作用程度不同．根据荧光光谱实验数据计算出Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤的配位比均为１∶１；它们与６－巯基嘌呤作用的配位常数分别为２．２３×１０４Ｌ／ｍｏｌ和６．１１×１０４Ｌ／ｍｏｌ；与腺嘌呤作用的配位常数分别为１．９５×１０４Ｌ／ｍｏｌ和５．１２×１０４Ｌ／ｍｏｌ．电化学实验也获得了相近的结果．这为解释Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与ＤＮＡ的作用机理及作用部位提供了有益的信息     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Integrated Microanalytical System Coupling Permeation Liquid Membrane and Voltammetry for Trace Metal Speciation. Technical Description and Optimization

A new minicell coupling the liquid‐liquid extraction technique called permeation liquid membrane (PLM) with an integrated Ir‐based Hg‐plated microelectrode array for voltammetric detection has been developed for the speciation of heavy metals in natural waters. Lead and cadmium have been used as model compounds. The PLM consists of a carrier (0.1 M 22DD+0.1 M lauric acid) dissolved in 1 : 1 mixture of toluene/phenylhexane held in the small pores (30 nm) of a hydrophobic polypropylene membrane (Celgard 2500). One side of this membrane is in contact with a flowing source solution, containing the metal ions of interest. An acceptor or strip solution (pyrophosphate) is placed on the other side of the PLM with the microelectrode array placed at 480 μm of the PLM. The analyte is transported by the carrier from the source solution to the strip solution. The originality of the new minicell is that accumulation in the strip solution is voltammetrically followed by the integrated microelectrode array in real time, and at low concentration level, using square‐wave anodic stripping voltammetry (SWASV). In order to protect the Hg microelectrodes from the adsorption of the hydrophobic carrier, the microelectrodes are embedded in a thin gel layer (280 μm) of 1.5% LGL agarose gel containing 10% of hydrophobic silica particles C18. The choice of optimum conditions is discussed in details in this article. Due to the very small effective strip volume of the new cell (less than 1 μL), high enrichment factor can be obtained (e.g., 330 for Pb) after 2 hours of accumulation. No deaeration of the solutions is required for SWASV measurements. Detection limits under these conditions are 2 pM and 75 pM for Pb and Cd, respectively, using a voltammetric deposition time of 5 min. In addition, no fouling effects were observed with natural water samples.