铜电极表面的电致发光法现场测试

采用电致发光等方法, 初步探讨了铜电极在0.25 mol·L~(-1)Na_2S_2O_8+1.25 mol·L~(-1)NaOH溶液中的电致发光特性及其相关性能, 给出了电致发光法现场测试铜电极表面性质的初步结果。     

Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

食道癌患者血清铜／锌比值及血清硒含量的测定及临床意义

报道了３５例食道癌患者血清铜／锌比值及血清硒水平，结果发现食道癌患者血清铜／锌比值增加，血清硒水平下降，具有显著性差异（Ｐ〈０．００１）；同时提示随着食道癌分期增加，铜／锌比值进一步增加，血硒水平进一步下降，但无统计学差异。上述结果对临床诊断及观察病情变化有一定意义。     

Copper(I) hexafluoroantimonate - an example of a compound with Cu in a solely fluorine environment

Yellow-orange single crystals of CuSbF₆, were prepared by reacting Cu wire (∼10 mmol) with SbF₅ (∼3 mmol) in liquid anhydrous hydrogen fluoride (aHF) and by reduction of Cu(SbF₆)₂ with Cu metal in aHF. CuSbF₆ crystallizes rhombohedral at 296 K with the LiSbF₆ structure type, with a = 530.4(4) pm, c = 1453(1) pm and Z = 3, space group R (no. 148). The structure is dominated by isolated layers of regular [SbF₆]⁻ octahedra and Cu⁺ cations.An attempt to prepare CuF by reaction between CuSbF₆ and CsF in aHF at ∼190 K failed. Instead of CuF, a mixture of Cu and CuF₂ was obtained.     

O. Carboxyphenylhydrazoethylacetoacetate as an Analytical Reagent for the Determination of Cu(II) and Co(II) in Complex Materials

An extraction‐spectrophotometric method for the determination of trace amounts of copper and cobalt based on their extraction into n‐pentanol with 0. carboxyphenylhydrazoethylacetoacetate (O.CPHEAA) was per formed. Copper was extracted from pH 6.0 – 8.0 and ionic strength 0.5 M – KCl. The maximum absorption of the extracted Cu(II) ‐ O.CPHEAA complex (1:1 & 1:2 species) occurs at 415 nm. The proposed method succeeded in as saying a concentration of 3–63 μg per 10 mL of n‐pentanol (? = 1.25 × 10⁴L mol^?1 cm^?1). The method failed to ex tract cobalt ion into various organic sol vents over a pH range of 2–11. The suggested method is highly selective and sensitive according to a wide scheme of interference studied. Copper in some plant samples was accurately estimated using the suggested method. The obtained results and the results of the AAS method were consistent. The reproducibility test shows a relative standard deviation of 1%. Sandell sensitivity for A = 0.001 is 5 × 10^?3 μg cm^?2.     

The Effects of M2O3 on Stabilizing Monocopper over the Surface of Cu-ZnO-M2O3 Catalysts for Mathanol Synthesis

The effects of M₃O₃ (M = Al, Sc etc.) in Cu-ZnO-M₂O₃ catalysts on methanol synthesis at low pressure were studied with ESR, XPS and TPR spectroscopy. The results of ESR showed that the generation of monovalent cationic defects was because the valence state and electronic charge on the ZnO lattice lost their balance as M³⁺ doped into ZnO. The induced effect by Sc³⁺ is stronger than that by Al³⁺. The results of XPS and TPR indicated that the amount and stabilization of Cu⁺ on the surface of reduced copper-based catalyst and its catalytic activity were affected by the monovalent cationic defects on the surface of ZnO.     

Copper phosphonates with dinuclear and layer structures: a structural and magnetic study

Hydrothermal reactions of copper (II) nitrate with 1-hydroxycyclohexanephosphonic acid [C₆H₁₀(OH)PO₃H₂] or Δ¹-cyclohexenephosphonic acid [C₆H₉PO₃H₂] have resulted in three new copper phosphonates, namely, Cu(C₆H₁₀(OH)PO₃)(H₂O)₂ (1), Cu(C₆H₁₀(OH)PO₃) (2) and Cu(C₆H₉PO₃)(H₂O) (3). Compound 1 has a dinuclear structure in which two {CuO₅} square pyramids are bridged by two {CPO₃} tetrahedra through corner sharing. The dimers are connected through intermolecular hydrogen bonds, forming supramolecular layers. Both compounds 2 and 3 show layer structures typical for metal mono-phosphonates, in which the inorganic metal-containing layers are separated by cyclohexane or cyclohexene groups. The magnetic studies show that ferromagnetic interactions are mediated between copper centers in compound 1. In compounds 2 and 3, antiferromagnetic interactions are dominant.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

火焰原子吸收法快速分析硫酸中铅镉铜锌

文中直接取硫酸样品3ml于装有约10ml水的25ml比色管中,加入碘化钾溶液2ml,用水稀至刻度。加入甲基异丁酮5ml,萃取lmin,分层后,在有机相中测定铅、镉、铜含量;在水相中测定锌含量。方法的加标回收率为98.9％～103％,精密度1.8％～4.3％,标准曲线法和标准加入法结果相近,倍比试验结果亦相吻合,方法快速简便、准确,适合于工业中的快速分析。     

高血脂大鼠摄入富硒饲料对血清中铜,锌,钙,镁含量的影响

将４０只雄性ＳＤ大鼠随机分成两组，采用猪油（Ｌ）或玉粮米油（Ｍ）加胆固醇饲料诱导出大高血脂模型后，再分出两组、分别加入亚硒酸钠（Ｌ－Ｓｅ，Ｍ－Ｓｅ），观察大鼠补硒后血清中锌铜、锌、钙、镁等元素的变化。结果表明，高血脂大鼠补硒后血 锌的含量明显下降，铜／锌比值长高。相关分析显示：血硒水平与血清锌含量呈负相关，各组大鼠血清铜、钙、镁的浓度未观察到显著性差异。