掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...     

一种通过梯形PPMgLN波导倍频实现带宽可调谐光源的理论研究

本文设计了一种梯形的周期极化掺镁铌酸锂(PPMgLN)波导,并通过在传播方向上引入温度梯度来拓宽其倍频(SHG)过程的泵浦光源可接收带宽。通过有限差分的光束传输法,计算波导的有效折射率,并进行波导尺寸的设计。结果表明,通过改变梯形波导不同位置的温度,使其形成一个温度梯度,可拓宽泵浦光源的波长可接收带宽。本文所设计的PPMgLN波导最大泵浦光源可接收带宽为C波段,即1 530~1 565 nm,该波导可倍频C波段,得到输出波段带宽为765~782.5 nm,温度调谐范围为30~150 ℃。     

Analysis,design and simulation of MIM plasmonic filters with different geometries for technical parameters improvement

In this paper, four optical filter topologies based on metal–insulator–metal waveguides are proposed and the designed structures are investigated numerically using finite-difference timedomain method. Triangular-shaped adjunctions have been added to the filter structures to improve their transmission spectrum. These improved structures consist of air as the insulator and silver as the metal. The relative permittivity of metal has been described via the Drude,Drude–Lorentz, and Palik models. The first filter's transmission spectrum shows an acceptable transmittance. In the second optimized filter, the transmission spectrum has been improved. The transmittance spectrum can be tuned through adjusting the edge of the triangle in these four optimized filters. As a result, the bandwidths of resonance spectra can be adjusted. The theory of such tapered structures will be investigated by the tapered transmission line and will be solved with the transfer matrix method. This method shows a better performance and higher transmission efficiency in comparison with the basic structures. On the other hand, the final filter has been chosen as the best one because of its hexagonal resonator. The main reason for having a better result is due to a longer interaction length in comparison with the circular resonator. This in turn creates much better energy coupling and results in higher transmission.     

Interplay of local resonances and Bragg band gaps in acoustic waveguides with periodic detuned resonators

This letter is concerned with acoustic wave propagation and transmission in acoustic waveguides with periodically grafted detuned Helmholtz resonators. The interplay of local resonances and Bragg band gaps in such periodic systems is examined. It is shown that, when the resonant frequencies of the resonators are tuned close to a Bragg band gap, the behavior of the Bragg band gap can be affected dramatically. Particularly, by introducing appropriately tuned resonators, the bandwidth of a Bragg band gap can be reduced to zero, leading to a very narrow pass band with great wave attenuation performance near both band edges. The band formation mechanisms of such periodic waveguides are further examined, providing explicit formulae to locate the band edge frequencies of all the band gaps, as well as the conditions to achieve very narrow pass bands in such periodic waveguides.     

5-(2-硫甲基-4-甲基-5-嘧啶基)-2,4戊二炔-l-醇α-甲基丙烯酸酯(PDMA)/PMMA的全光通道波导

利用Ａｇ＋－Ｎａ＋离子交换法形成了Ａｇ＋离子基底，在此基础上镀上ＰＤＭＡ／ＰＭＭＡ膜并在Ｙ型波导分支上进行局部紫外聚合，从而制成了较理想的通道波导。测定了ＰＤＭＡ／ＰＭＭＡ的线性折射率及Ａｇ＋离子基底的折射率，实现了较理想的复合波导传输。     

基于硫堇掺杂的聚乙烯醇薄膜的光波导传感器检测硫化氢气体

采用旋转甩涂法将硫堇掺杂的聚乙烯醇薄膜固定在K⁺交换玻璃光波导表面,研制出一种高灵敏硫化氢气体传感器。 传感膜与硫化氢(H₂S)气体作用时,薄膜颜色从紫色变为无色,从而降低薄膜对倏逝波的吸收,使传感器的输出光强度（信号）增强。 采用流动注射法对H₂S气体进行检测。 实验结果表明,H₂S传感器对浓度在0.14~56 mg/m3范围的H₂S气体具有良好的线性响应（r=0.99667）,检出限为0.11 mg/m³(S/N=3),相对标准偏差为4.0%,响应时间（t90）＜2 s。 该传感器具有灵敏度高、响应快、可逆性和重复性好等特点。     

可交联聚甲基丙烯酸甲酯的合成、表征及在阵列式波导光栅中的应用

合成了含环氧基团的可交联的甲基丙烯酸甲酯和甲基丙烯酸环氧丙酯的共聚物[Poly(MMA-co-GMA)],通过FTIR,NMR,GPC,DSC和AFM等技术对其进行了表征. 结果表明,所合成的聚合物材料具有较好的成膜性; 通过热固化使引入的环氧基团开环交联,该聚合物的玻璃化转变温度(Tg)比固化前提高了24 K,同时有效地降低了聚合物的双折射率. 用Poly(MMA-co-GMA)作为包层材料,双酚A型环氧化合物作为高折射率材料, 将其引入到包层材料中形成芯层材料的折射率在波长1.55 μm处可调,其范围是1.483~1.588. 采用旋涂、 铝掩膜和氧反应离子刻蚀的方法(RIE)制得了阵列式光波导. 测试结果表明,制作的波导在1.55 μm处实现了光的单模传输,光损小于3.0 dB/cm.      

Monte Carlo Study of Slot-waveguide Liquid Crystal Phase Shifters

Abstract

We present detailed Monte Carlo simulations of a simple model of a nematic liquid crystal slot waveguide shifter, investigating the effect of an applied electric external field. The simulations are based on the Lebwohl-Lasher lattice spin model with boundary conditions chosen to mimic the planar alignment as in Silicon Organic Hybrid waveguides and the homeotropic anchoring appropriate for Polydimethylsiloxane polymer walls. The external field is modeled by adding a term to the Hamiltonian which describes its coupling to the mesogenic molecules. We have investigated the effect of the external field on the optical transmission and the ordering across the cell.     

Closed-System Solution of the 1D Atom from Collision Model

Obtaining the total wavefunction evolution of interacting quantum systems provides access to important properties, such as entanglement, shedding light on fundamental aspects, e.g., quantum energetics and thermodynamics, and guiding towards possible application in the fields of quantum computation and communication. We consider a two-level atom (qubit) coupled to the continuum of travelling modes of a field confined in a one-dimensional chiral waveguide. Originally, we treated the light-matter ensemble as a closed, isolated system. We solve its dynamics using a collision model where individual temporal modes of the field locally interact with the qubit in a sequential fashion. This approach allows us to obtain the total wavefunction of the qubit-field system, at any time, when the field starts in a coherent or a single-photon state. Our method is general and can be applied to other initial field states.