Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.     

Parameters to Define the Electron Beam Trajectory of a Double-Tapered Disc-Loaded Wideband Gyro-TWT in Profiled Magnetic Field

In the method of tapering the cross section of the interaction structure for broadbanding a gyro-TWT, the different portions of the interaction length of the tapered-cross-section waveguide become effective for different frequency ranges if the magnetic field and beam parameters are profiled to maintain the condition of electron cyclotron resonance throughout the interaction length. In the present paper, the study of profiling the magnetic field and beam parameters in steps of the stepped analytical model of a double-tapered disc-loaded circular waveguide was made throughout the steps of the model. In the observed profile, the magnetic flux density in a typical step relative to its value in first-step decreases from first-step (gun-end) to end-step (collector-end) of the model considering the up-tapering schemes, in which structure parameters increase from gun-end to collector-end. Also, the transverse beam velocity in a typical step relative to its value in first-step decreases from gun-end to collector-end. However, the Larmor radius in a typical step relative to its value in first-step as well as the hollow-beam radius in a typical step relative to its value in first-step, both increase from gun-end to collector-end in the model considering the up-tapering schemes.     

多波段条纹管激光成像系统探测距离计算

基于条纹管激光成像的基本原理，分析了利用条纹管实现紫外到近红外波段激光成像的技术可行性，并对其性能进行了分析；建立了激光成像雷达方程，计算了不同波长在不同天气条件下的探测距离，并分析了各激光波长的应用领域和优缺点．     

轴角编码器测量中偏心带来的误差分析

介绍了应运多面体和自准直光管组合测量高准确度编码器角度的原理和方法，具体分析了多面体中心和编码器轴中心偏心时对测量角度产生的测量误差，并对自准直光管光轴和多面体中心、编码器轴中心两者偏心连线不重合时产生的测量误差进行了分析，同时对两中心偏心的方向进行了判定．实验证明，多面体中心与编码器轴中心不重合时对测量将产生按正弦或余弦规律变化的系统误差，同时自准直光管光轴和两者中心连线不重合对测量结果将不会产生影响．     

无支持膜法TiO2纳米管透射电镜观察

用透射电镜观察纳米量级的样品,通常要承载在具有支持膜的铜风上观察,铜网上制膜虽然有多种方法,但者需要有一定的过程,经过实践,我们采取无支持膜法用铜网直接捞取TiO2纳米管样品,在诱射电镜下观察获得了比较满意的结果。     

二甲醚低温低压自点火行为的实验和理论研究

针对二甲醚(DME)低温低压数据缺乏和反应机理认识不统一问题,利用高压激波管进行点火延迟期测量实验,实验工况完整覆盖负温度系数(NTC:Negative Temperature Coefficient)区域.使用Aramco Mech 3.0机理对实验结果进行了数值仿真,发现与实验数据相比存在两个差异较大的典型区域:N...     

反射波对预混气体爆炸过程与管壁动态响应的影响

为研究管道内甲烷/空气混合气体火焰和压力波的传播规律,对内载压力波作用下管壁的动态响应进行实验。结果表明,末端闭口实验中,管道末端的反射激波会引起当地火焰亮度的增大,而前端反射激波则有可能导致火焰内部的分离从而出现熄灭与复燃现象。相对于末端开口工况,末端闭口实验时管道两端产生的往复反射激波对管壁具有叠加加载作用,导致管壁产生较大的环向应变。     

高频脉冲管制冷机流动特性实验分析

系统的测量了不同运行条件下,高频脉冲管制冷机蓄冷器冷端压力波幅值、速度波幅值以及它们之间相位差的变化规律。结合焓流理论,解释了小孔开度、充气压力、压比和运行频率,在高频条件下对制冷性能的影响规律。所得结果定性解释了制冷机中相应的实验现象,对于高频脉冲管制冷机的机理理解和实验研究有重要指导意义。     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

瞬态加速液柱的流体力学问题研究

介绍了用激波和压缩气体加速液柱时的流体动力现象的实验研究,实验中采用了高速摄影技术。研究分为两部分:第一部分,液柱在被加速后在管内的气/液两相流的发展以及流出管外后喷雾流的形成,喷雾流自下而上产生;第二部分,气/液界面上的流体力学不稳定性,即Rayleigh Taylor(RT)不稳定性及Richt myer Meshkov(RM)不稳定性,液柱自上而下运动。实验发现,用此方法产生的喷雾具有流量大、射程远、覆盖面积大等特点。液柱在管内的加速过程中,上端面保持平面,下端面在经历了初始的不稳定性之后形成弹状流。在本实验的驱动压力及马赫数的范围内,RT和RM不稳定性的后期的发展过程比较接近,尽管两者的增长率不同。在RT不稳定性的初始阶段,高密度流体的尖钉先伸入低密度流体中;但是,在RM不稳定性的初始阶段,低密度的气泡先伸入高密度流体中。