晶化温度对中孔分子筛（M41S）结构转变的影响

在低表面活性剂浓度及低表面活性剂与氧化硅比的条件下，研究了十六烷基三甲基溴化铵－硅酸钠体系中晶化温度对中孔分子筛Ｍ４１Ｓ材料结构转变的影响。结果有，晶化温度提高至１３５℃改变了原六方晶相ＭＣＭ－４１的结构，晶化温度提高到１５０℃后，中孔结构六方ＭＣＭ－４１晶格转变为变不稳定的层状相，     

高分子在生物工程中的应用进展

在生物工程中所用的高分子材料一般统称为高分子生物材料,其涉及的范围很广。医用高分子是其中很重要的一类,另一类就是在生物技术中所用的高分子材料。对于高分子生物材料可根据其材料性质进行分类,也可按使用范围进行分类。如体内应用的材料,半体内应用的材料和体外应用的材料。本文着重介绍了抗凝血材料、药用高分子材料及应用于生物技术中高分子材料的研究进展,并总结分析了这几个研究领域中的发展趋势。     

长余辉发光玻璃SrAl2O4∶Dy, Eu的制备与发光性能研究

在低熔点破璃中掺杂一定量的长余辉发光粉制备了性能优良的长余辉发光玻璃。在保证发光玻璃均匀透明的基础上，发光性能随发光粉掺杂量的增加而增强，尽量降低假烧温度和减少保温时间可以保持良好的发光性能，在还原气氛制备的发光玻璃性能优于在空气中制备的。煅烧工艺对发光玻璃的微观结构有显著的影响。     

Mg-Nd-Zr-Zn合金的制备及钕对合金组织性能的影响

在RJ-2溶剂和Be的联合保护下制备了Mg-Nd-Zr-Zn系合金. 通过对合金组织的分析, 以及Nd对组织性能影响的研究, 试制出了Nd添加量合理的Mg-Nd-Zr-Zn合金. 经过测试, 认为Nd添加量的增加提高了合金的250 ℃高温抗拉强度, 当Nd添加量超过2.8%时, 合金的高温强化作用不十分显著. Mg-Nd-Zr-Zn合金在250 ℃时的拉伸断裂方式主要是韧性断裂.     

镧对含锡、锑残余元素的34CrNi3Mo钢热塑性的改善作用

采用Gleeble-1500热模拟机测定了不同含量的残余元素锡、锑及稀土镧对低氧、低硫的34CrNi3Mo钢热塑性的影响;采用SEM及EDS手段研究了稀土镧对不同锡、锑含量的钢断裂方式的影响及在其中形成夹杂物的情况。结果表明,用稀土金属可以改善低氧、低硫钢中残余元素对钢性能的危害;镧可以和钢中较低含量的锑作用生成镧锑金属间化合物,并且发现了少量的镧锡金属间化合物。     

Synthesis of novel mesoporous silica spheres with starburst pore canal structure

Novel spherical mesoporous silica materials with uniform diameters and starburst mesopore structures were synthesized by a simple one-step procedure with ethanol as the co-solvent in dilute aqueous solution and their formation mechanism was proposed. The arrangement of the pore canal and the diameter of the sphere could be tailored by altering the concentration of ethanol.     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

Synthesis, X-ray crystal structures, and gas sorption properties of pillared square grid nets based on paddle-wheel motifs: implications for hydrogen storage in porous materials

A systematic modulation of organic ligands connecting dinuclear paddle-wheel motifs leads to a series of isomorphous metal-organic porous materials that have a three-dimensional connectivity and interconnected pores. Aromatic dicarboxylates such as 1,4-benzenedicarboxylate (1,4-bdc), tetramethylterephthalate (tmbdc), 1,4-naphthalenedicarboxylate (1,4-ndc), tetrafluoroterephthalate (tfbdc), or 2,6-naphthalenedicarboxylate (2,6-ndc) are linear linkers that form two-dimensional layers, and diamine ligands, 4-diazabicyclo[2.2.2]octane (dabco) or 4,4'-dipyridyl (bpy), coordinate at both sides of Zn(2) paddle-wheel units to bridge the layers vertically. The resulting open frameworks [Zn(2)(1,4-bdc)(2)(dabco)] (1), [Zn(2)(1,4-bdc)(tmbdc)(dabco)] (2), [Zn(2)(tmbdc)(2)(dabco)] (3), [Zn(2)(1,4-ndc)(2)(dabco)] (4), [Zn(2)(tfbdc)(2)(dabco)] (5), and [Zn(2)(tmbdc)(2)(bpy)] (8) possess varying size of pores and free apertures originating from the side groups of the 1,4-bdc derivatives. [Zn(2)(1,4-bdc)(2)(bpy)] (6) and [Zn(2)(2,6-ndc)(2)(bpy)] (7) have two- and threefold interpenetrating structures, respectively. The non-interpenetrating frameworks (1-5 and 8) possess surface areas in the range of 1450-2090 m(2)g(-1) and hydrogen sorption capacities of 1.7-2.1 wt % at 78 K and 1 atm. A detailed analysis of the sorption data in conjunction with structural similarities and differences concludes that porous materials with straight channels and large openings do not perform better than those with wavy channels and small openings in terms of hydrogen storage through physisorption.