The role of various binding materials for trace elemental analysis of powder samples using laser-induced breakdown spectroscopy

Study of various binding materials like potassium bromide, poly(vinyl alcohol), starch, silver and aluminum has been carried out using laser-induced breakdown spectroscopy (LIBS). The role of matrix effects using these five binders on LIBS signal intensity was investigated for better performance of LIBS technique as a quantitative analytical tool. For comparative study of different binders, the signal intensity of different Mg lines at 518.3, 517.2, 383.8 and 279.5 nm wavelengths were recorded for pellets prepared with known concentrations of Mg in these binders. The influence of laser energy on ablated mass under different binding materials and its correlation with LIBS signal intensity has been explored. Optical scanning microscopy images of the ablated crater were studied to understand the laser ablation process. The study revealed that the binding material plays an important role in the generation of LIBS signal. The relative signal intensity measured for a standard Mg line (at 518.3 nm) were 735, 538, 387, 227 and 130 for potassium bromide, starch, poly(vinyl alcohol), silver and aluminum as binders, respectively. This indicates clearly that potassium bromide is better as a binder for LIBS studies of powder samples.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

酞菁氧钛/卟啉氧钒复合体系光导性能的协同增强效应

在酞菁氧钛（TiOPc)／卟啉氧钒（VOTPP）复合光生材料中发现了光敏性的非线性增强现象，对复合体系的电子跃迁光谱和X射线衍射图的研究结果表明，在基态下两种材料之间没有明显相互作用，光致放电研究说明，该现象来自光激发状态下复合体系中的隙间态跃迁对光导的贡献，XPS测试结果表明酞菁氧钛与卟啉氧钒分子之间存在着定向的部分电荷转移，光致激发状态下的电荷转移是协同增强效应的起因，这种协同增强效应为利用弱的电子给体与弱的受体复合体系设计新型光导材料与器件提供了新方法。     

Coaxial electrospinning core-shell fibers for self-healing scratch on coatings

Polystyrene (PS) fibers with core-shell structure were prepared by coaxial electrostatic spinning using liquid epoxy or curing agent as the core and PS solution as the shell. Scratch self-healing coatings were realized by using the healant-loaded core-shell fibers in the matrix.     

焙烧富集分离－氢化物原子荧光法测定地质物料中痕量硒

本文研究了一种焙烧富集分离、氢化物－原子荧光法测定地质物料中痕量Ｓｅ的方法。系统地研究了Ｓｅ富集分离条件、考查了３０多种元素在焙烧前后对测定Ｓｅ的影响，在选定的最佳实验条件下，方法检出下限为０．０１μｇ／ｇ，线性范围为０．００１～０．３μｇ／ｍＬ。样品中Ｓｅ含量水平为０．０３６μｇ／ｇ和０．０８９μｇ／ｇ时的测量精度（ＲＳＤ）分别为１０％和５．８％。加标回收率为９７～９９％。采用本方法分析了２６个地球化学标准参考样中痕量硒，获得满意结果。     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

溶胶-凝胶法合成纳米铬酸锶镧的工艺研究

以硝酸镧、硝酸铬、硝酸锶为原料，乙二醇为分散剂，柠檬酸为胶溶剂，用溶胶-凝胶法合成纳米级的铬酸锶镧粉体。利用TG，DSC，XRD分析研究了粉料的晶化过程。利用HREM分析了煅烧温度、含锶量对粉料粒径的影响。研究表明，获得纳米晶的最佳烧结温度在800℃。随着锶掺杂量的增加，粉料的粒径逐渐变小。