酞菁氧钛/卟啉氧钒复合体系光导性能的协同增强效应

在酞菁氧钛（TiOPc)／卟啉氧钒（VOTPP）复合光生材料中发现了光敏性的非线性增强现象，对复合体系的电子跃迁光谱和X射线衍射图的研究结果表明，在基态下两种材料之间没有明显相互作用，光致放电研究说明，该现象来自光激发状态下复合体系中的隙间态跃迁对光导的贡献，XPS测试结果表明酞菁氧钛与卟啉氧钒分子之间存在着定向的部分电荷转移，光致激发状态下的电荷转移是协同增强效应的起因，这种协同增强效应为利用弱的电子给体与弱的受体复合体系设计新型光导材料与器件提供了新方法。     

Enhancement of the static SIMS secondary ion yields of lipid moieties by ultrathin gold coating of aged oil paint surfaces

Static secondary ion mass spectrometry (SIMS) is a powerful technique for identification and localization of pigments and binding media present in traditional paintings. Coating the surface of a cross‐section with a 20 Å thick gold layer improves the yields of secondary ions from the fatty acids and diacids. A chalk tablet containing 1% stearic acid, which was partially covered during gold deposition, is used as a test system to investigate the increase of the organic secondary ion yields upon gold deposition in SIMS imaging. A comparative study of a native and gold‐coated aged surface of a lead white‐containing linseed oil paint demonstrates the enhancement of the organic ion yields on a sample relevant for painting studies. The yields of oil paint‐derived negative ions increase by a factor of 3 whereas the yields of positive ions increase by a factor of 2–4. The different types of charged functional groups determine the degree of improvement in yield. Gold coating improves the ionization process of the fatty acids and does not influence their fragmentation. The dissociation of the lead white by the primary ion beam is reduced due to the gold coating. Copyright © 2004 John Wiley & Sons, Ltd.     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

丙烯酸酯接枝炭黑无皂水性涂料的性能研究

旋转粘度计研究了丙烯酸酯接枝炭黑无皂水性涂料的流变性能，并考察了着色涂料的冻融及贮存稳定性。接枝炭黑争散于无皂水性涂料中形成的着色涂料具有良好的综合性能。     

尖晶石LiMn_2O_4的表面改性研究

采用溶胶_凝胶法合成尖晶石LiMn2 O4 ,并以LiCoO2 对其进行包覆 ,用XRD、SEM、EPMA等方法对修饰的尖晶石结构和性能进行研究 .结果表明 ,经包覆的LiMn2 O4 在 70 0℃焙烧 10h所得的晶粒是表层富含Co的立方尖晶石 ,而且晶粒中Co3+的含量呈现出从表到里递减的梯度分布 .以该材料作锂离子电池正极 ,虽初始容量稍有降低 ,但能有效地降低Mn2 +在电解质中的溶解 ,而且对Jahn_Teller效应有一定的抑制作用 ,包覆的LiMn2 O4 尖晶石正极材料比未包覆的有更好的循环性能     

动力学涂层毛细管电泳分离双链脱氧核糖核酸片段

以异丙醇为聚合反应链转移试剂，水相法合成了短链聚N，N－二甲基丙烯酰胺（PDMA），研究表明，该聚合物能在毛细管内壁形成稳定的动力学涂层，从而有效地抑制电渗流和毛细管内壁与DNA的作用。这种介质被成功地应用于DNA片段的高效分离。     

Rf‐GDOES analysis of composite metal/ceramic electroplated coatings with nano‐ to microceramic particles' size: issues in plasma sputtering of Ni/micro‐SiC coatings

Ni matrix composite coatings reinforced with nano‐ and microceramic particles were analyzed by radio frequency glow discharge optical emission spectrometry (Rf‐GDOES). An interesting phenomenon related to the sputtering and excitation modes of this technique was observed. During plasma sputtering with Rf‐GDOES, the micro‐SiC particles were detached from metal matrix and did not contribute to the analytical signals. The same was not found in composite coatings containing nanoceramic particles. This anomalous behavior was confirmed by atomic force microscopy (AFM) investigation and scanning electron microscope (SEM) observations into Rf‐GDOES craters that showed the presence of residual non‐sputtered microparticles. Various attempts were done in order to minimize this problem, mainly by varying the analysis parameters of the used instrumentation, but without any relevant success. Some suggestions were then proposed for explaining the observed phenomenon, moreover possible solutions (e.g. by using a strong magnetic field or changing plasma gas to be more energetic) are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface characteristics and wetting properties of sol–gel coated base paper

Two hybrid coatings synthesized by using alkoxysilanes as precursors in a sol–gel process, differing from each other in terms of the organic components in alkoxysilanes, have been developed to improve the water repellent properties of base paper. The sol–gel‐coated base paper samples were characterized by scanning electron microscopy, atomic force microscopy, confocal laser scanning microscopy, X‐ray photoelectron spectroscopy, time‐of‐flight secondary ion mass spectrometry, and contact angle measurements. The sol–gel coatings were found to clearly change the surface properties of base paper. Thin coating layers were formed on base paper surfaces. The topographical data indicated the formation of discontinuous thin films; the time‐of‐flight secondary ion mass spectrometry analyses confirmed that the coatings were covering the fibres but only partially covered the fibre–fibre intersections. Water and the subsequent heat treatment used as a reference treatment reduced the surface roughness and porosity and slightly changed the surface chemistry of the base paper. The wettability and absorptivity of base paper was clearly reduced by the applied coatings. Copyright © 2011 John Wiley & Sons, Ltd.