金属氧化物催化剂上合成气转化中羧酸盐物种促进芳烃的生成

芳烃是重要的化工原料,目前主要通过石油催化裂化和催化重整制得.随着石油资源的消耗以及芳烃的需求日益增长,开发非石油路线制备芳烃势在必行.因此,从煤、天然气和生物质出发,经合成气一步制芳烃(STA)广受关注.将合成气制甲醇的金属催化剂和甲醇制芳烃的分子筛催化剂复合,可以制备双功能催化剂,用于合成气反应可高选择性得到芳烃.然而,关于此过程中芳烃的生成机理仍有争论.目前人们认为,生成芳烃的中间体主要分甲醇和其他含氧物种(乙烯酮,醛类)两种.本文以ZnCrAlOx和H-ZSM-5为模型催化剂,进行合成气制芳烃、甲醇制芳烃和丙烯制芳烃反应,确定了传统的甲醇制芳烃路径不是合成气制芳烃中的主要途径,并通过原位傅里叶变换红外光谱和气相色质谱解释了STA反应中两种活性组分距离越近,芳烃选择性越高的原因,从而提出了在合成气制芳烃过程中芳烃的生成机理.通过比较双功能催化剂上合成气、甲醇以及丙烯的反应性能发现,在甲醇和丙烯转化时,其芳烃选择性远小于合成气转化时的,由此可认为,在合成气制芳烃的路径主要不经由传统的甲醇制芳烃,而是通过烯烃聚合脱氢生成芳烃.红外表征和共进料实验表明,合成气可以在金属催化剂表面生成甲酸盐物种,它可与烯烃反应生成羧酸盐物种,再迁移到分子筛上反应生成芳烃,且羧酸盐物种在分子筛上的芳构化能力要高于丙烯;即使在氢气氛围下,当丙烯的芳构化能力受到氢气极大抑制时,羧酸盐物种仍能高选择性生成芳烃.本文制备了一系列金属催化剂和分子筛物理接近距离不同的双功能催化剂,研究了合成气在双功能催化剂上制芳烃时,金属催化剂和分子筛二者组分的距离对芳烃选择性的影响.随着二者接近距离的增加,芳烃选择性急剧增加;通过GC-MS分析合成气转化时的停留物种,发现随着二者接近距离的增加,羧酸盐物种和甲基环戊烯酮的量明显增加,因此,羧酸盐物种和甲基环戊烯酮物种在生成芳烃中起到了重要的作用.综上所述,我们提出了STA中一条新的芳烃生成路径,并证明了羧酸盐物种是其中重要的中间物种.它经由金属表面的甲酸盐物种和烯烃反应生成,随后迁移到分子筛上生成甲基环戊烯酮物种,再脱水生成芳烃.     

Controlling the infrared optical properties of rf-sputtered NiO films for applications of infrared window

In this paper, we will focus on an IR transmittance enhancement technique from the window material point of view by using metal oxides, especially nickel oxide (NiO). At first, anti-reflection (AR) coatings were modeled by using the optical properties of NiO films. The transmittance of the model was predicted using Swanepoel’s model and verified with NiO film prepared by rf magnetron sputtering. Also, post-deposition annealing was performed and was found to change the optical properties of the NiO film. Therefore, we analyzed the annealing effect on the IR optical properties of the NiO film. Furthermore, we confirmed the durability of the NiO film and verified the possibility of this material being used in infrared optics.     

Nano-composite LiMnPO4 as new insertion electrode for electrochemical supercapacitors

Nano-composite olivine LiMnPO₄ (nC-LMP) was found to exhibit facile pseudo-capacitive characteristics in aqueous as well as non-aqueous electrolytes. We demonstrated employing nC-LMP as positive electrode in hybrid electrochemical capacitors namely Li-Ion hybrid capacitors (LIC). Adapting a simple CVD technique, nano-crystallites of LiMnPO₄ were coated with carbon monolayers of ∼2 nm thick to circumvent its poor intrinsic electronic conductivity. The novelty is that the single crystallites were intimately covered with carbon ring and networked to the neighboring crystallites via the continuous carbon wire-like connectivity as revealed from HRTEM analysis. Single electrode faradic capacitance of 3025 Fg⁻¹ (versus standard calomel reference electrode) was deduced for carbon coated LMP, the highest reported hitherto in Li⁺ aqueous electrolytes. Employing nC-LMP as working electrode versus an activated carbon (AC), we obtained a high specific energy of 28.8 Wh kg⁻¹ with appreciable stability in aqueous electrolytes whereas in nonaqueous electrolyte there is an obvious increase in energy density (35 Wh kg⁻¹) due to wider potential window. That is, a full cell version of LIC, AC|Li⁺|LMP, was fabricated and demonstrated its facile cycling characteristics via removal/insertion of Li⁺ within nC-LMP (positive electrode) and the electrosorption of Li⁺ into mesoporous carbon (AC) (negative electrode). Such cells ensured a typical battery-like charging and EDLC-like discharging characteristics of LIC type electrochemical capacitors (ECs) which are desired to enhance safety and energy densities.     

Electrical and optical properties of Si-doped indium tin oxides as transparent electrode and anti-reflection coating for solar cells

We have studied the electrical and optical properties of Si-doped indium tin oxides (ITSOs) as transparent electrodes and anti-reflection coatings for Si-based solar cells. The ITSO thin films were obtained by co-sputtering of ITO and SiO₂ targets under target power control. The resistivity of the ITSO thin films deposited at 0.625 in terms of power ratio (ITO/SiO₂) were 391 Ωcm. In this condition, the ITSO thin films showed very high resistivity compared to sputted pure ITO thin films (1.08 × 10⁻³ Ωcm). However, refractive index of ITSO thin films deposited at the same condition at 500 nm is somewhat lowered to 1.97 compared to ITO thin films (2.06). The fabricated graded refractive index AR coatings using ITO, ITSO, and SiO₂ thin films kept over 80% of transmittance regardless of their thickness varing from 97 nm to 1196 nm because of their low extinction coefficient. As the AR coating with graded refractive indices using ITO, ITSO, and SiO₂ layers was applied to general silicon-based solar cell, the current level increased nearly twice more than that of bare silicon solar cell without AR coating.     

无机硅酸盐涂料的研制及应用

以硅酸盐溶液为主要原料,利用少量自制的含偶联功能基团的有机硅聚合物乳液与硅酸盐进行杂化反应,同时与填料等有效的结合制备了无机硅酸盐涂料,并对涂料的性能进行研究。结果表明：制备的无机硅酸盐涂层具有优异的贮存稳定性、柔韧性、防水性、耐污性、阻燃性以及耐霉菌性等,满足建筑内外墙涂料的相关标准要求。     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.     

用于高性能涂料的无定型聚芳醚腈酮共聚物的制备及性能

通过亲核缩聚反应由酚酞、4,4′-二氟二苯酮和2,6′-二氯苯腈制备了一系列不同腈基含量的无定型聚芳醚腈酮共聚物。通过FT-IR、1 H-NMR、13 C-NMR、DSC、TGA等表征了聚合物的结构与性能。研究表明:随着腈基含量的提高,聚合物的玻璃化转变温度升高,在马口铁板上的附着力逐渐提高;该聚合物在有机溶剂中具有良好的可溶性和成膜性,聚合物涂层具有优异的综合性能。     

Study of the fire resistant behavior of unfilled and carbon nanofibers reinforced polybenzimidazole coating for structural applications

With increasing interest in epoxy‐based carbon fiber composites for structural applications, it is important to improve the fire resistant properties of these materials. The fire resistant performance of these materials can be improved either by using high performance epoxy resin for manufacturing carbon fiber composite or by protecting the previously used epoxy‐based composite with some fire resistant coating. In this context, work is carried out to evaluate the fire resistance performance of recently emerged high performance polybenzimidazole (PBI) when used as a coating material. Furthermore, the effect of carbon nanofibers (CNFs) on fire resistant properties of inherently flame retardant PBI coating was studied. Thermogravimetric analysis of carbon/epoxy composite, unfilled PBI and nano‐filled PBI shows that the carbon/epoxy composite maintained its thermal stability up to a temperature of 400°C and afterwards showed a large decrease in mass, while both unfilled PBI and nano‐filled PBI have shown thermal stability up to a temperature of 575°C corresponding to only 11% weight loss. Cone calorimeter test results show that unfilled PBI coating did not improve the fire retardant performance of carbon/epoxy composite. Conversely, nano‐filled PBI coating has shown a significant improvement in fire retardant performance of the carbon/epoxy composite in terms of increased ignition time, reduced average and peak heat release rate and reduced smoke and carbon monoxide emission. These results indicate that addition of carbon nanofibers to inherently flame retardant coating can significantly be helpful for improving the fire resistance performance of composite materials even with low coating thickness. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of silanized maghemite nanoparticles onto reduced graphene sheets composites

Novel γ-Fe₂O₃@APTES@rGO composites are successfully synthesized by using graphene oxide and silanized maghemite nanoparticles. Graphene oxide and maghemite were obtained by Hummers and Massart methods, respectively. The silanization process was done to functionalize maghemite surface with a controllable quantity of amino groups. Then, by adding aqueous graphene oxide suspension, the bonding between graphene oxide and silanized maghemite nanoparticles was done in refluxing conditions. Afterwards, chemical reduced graphene oxide reaction was realized by addition of hydrazine solution. The characterization of γ-Fe₂O₃@APTES@rGO composites was studied by X-ray Diffraction, Fourier Transformed Infrared Spectroscopy, thermogravimetric analysis and scanning electron microscopy.     

Bi_2MoO_6/BiVO_4异质结的水热合成和可见光催化活性(英文)

采用一步水热法制备Bi2MoO6/BiVO4复合光催化剂.利用X射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征.结果表明,Bi2MoO6纳米粒子沉积在BiVO4纳米片表面从而形成异质结结构.紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi2MoO6/BiVO4异质结较纯相Bi2MoO6和BiVO4对可见光吸收更强.由于形成异质结结构及其光吸收性能使Bi2MoO6/BiVO4光催化活性有较大提高.可见光下(λ420 nm)光催化降解罗丹明B(RhB)实验结果表明,Bi2MoO6/BiVO4光催化活性较纯相Bi2MoO6和BiVO4高.Bi2MoO6/BiVO4样品光催化性能提高的原因是Bi2MoO6和BiVO4形成异质结,从而有效抑制光生电子-空穴对的复合,增大了可见光吸收范围及比表面积.