Dual emission of singlet and triplet states boost the sensitivity of pressure-sensing

Pressure-related sensing materials in mechanochromic luminescent materials have received wide attention. However, at present, most piezochromic luminescence (PCL) materials have problems such as aggregation-caused quenching (ACQ) effect due to the presence of powder form, complicated preparation methods and fluorescence quenching effect under high pressure. To solve these problems, we employ three components containing carbon dots (CDs), layered double hydroxides (LDHs) and polyvinyl alcohol (PVA) to construct the CDs-LDHs/PVA film. The LDHs can provide a rigid environment for CDs and improve the luminescent efficiency of CDs. The film shows high sensitivity, stability and reversibility. Moreover, the compressed film can recover to its original state by heating. Therefore, the PCL film with dual emission (fluorescence and phosphorescence) characteristic is constructed, which boosts the sensitivity of pressure-sensing.     

Discrete filter operators for large‐eddy simulation using high‐order spectral difference methods

The combination of a high‐order unstructured spectral difference (SD) spatial discretization scheme with sub‐grid scale (SGS) modeling for large‐eddy simulation is investigated with particular focus on the consistent implementation of a structural mixed model based on the scale similarity hypothesis. The difficult task of deriving a consistent formulation for the discrete filter within the SD element of arbitrary order led to the development of a new class of three‐dimensional constrained discrete filters. The discrete filters satisfy a set of selected criteria and are completely local within the SD element. Their weights can be automatically computed at run time from the number of solution points within each element and the expected filter cutoff length scale. The novel discrete filters can be applied to any SGS model involving explicit filtering and to a broad class of high‐order discontinuous finite element numerical schemes. The code is applied to the computation of turbulent channel flows at three Reynolds numbers, namely Re_τ = 180, 395, and 590 (based on the friction velocity u_τ and channel half‐width δ). Results from computations with and without the SGS model are compared against results from direct numerical simulation. The numerical experiments suggest that the results are sensitive to the use of the SGS model, even when a high‐order numerical scheme is used, especially when the grid resolution is kept relatively low and mostly in terms of resolved Reynolds stresses. Results obtained using existing filters based on the projection of the solution over lower‐order polynomial bases are also shown and demonstrate that these filters are inadequate for SGS modeling purposes, mostly because of their inability to enforce the selected cutoff length scale with sufficient accuracy. The use of the similarity mixed formulation proved to be particularly accurate in reproducing SGS interactions, confirming that its well‐known potential can be realized in conjunction with state‐of‐the‐art high‐order numerical schemes.Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation of Zn(Cd)O:Ga–SiO2 composite scintillating materials

Composite material consisting of highly luminescent Zn(Cd)O:Ga powder embedded in the silica matrix was prepared. It was found out that ZnO:Ga with less developed crystals (i.e. annealed at lower temperatures) is more prone to interact with the SiO₂ matrix and form zinc silicates, which in turn resulted in the decrease in the excitonic emission. Pre-annealing of the powders at temperatures above 600 °C prevented the interaction with the SiO₂ matrix. ZnO:Ga with well-developed crystals at such a high temperatures was not affected by the matrix and retained its properties, i.e. high radioluminescence intensity and ultrafast sub nanosecond photoluminescence decay. Introducing Cd into the ZnO lattice caused observable red shift in the excitonic luminescence, without negatively affecting the total intensity or the decay.     

Quartz Crystal Microbalance Biosensor for Saxitoxin Based on Immobilized Sodium Channel Receptors

This work explored the possibility of coupling the toxin receptor-binding principle with the piezoelectric transduction principle. The sensing component of the saxitoxin biosensor involves a piezoelectric quartz crystal that was coated with sodium channel receptors. The sodium channel receptors were isolated from the electroplax organ of Electrophorus electricus. Binding of the sodium channel extracts to the quartz crystal was facilitated by pre-coating the gold electrode with a hydrophobic self-assembled monolayer of dodecanethiol. The instrumentation system consisted of a flow cell that held the quartz crystal, an oscillator circuit, an injection port, and a frequency counter that was connected to a personal computer. The various immobilization and measurement parameters were optimized. Binding of saxitoxin standards with the immobilized sodium channels was monitored through the decrease in the crystal oscillation frequency readings (ΔF) upon the introduction of saxitoxin into the flow cell. A calibration curve for saxitoxin was constructed by plotting the ΔF values vs. saxitoxin concentrations in the range from 0.1 to 2.0 μg/mL. A correlation coefficient of 0.9653 was obtained. The saxitoxin biosensor developed has the potential to be applied to the rapid screening of total paralytic shellfish poisoning toxins.     

Synthesis,Crystal Structure and Properties of Novel Composite Complex: [La(Nmp)4(H2o)4][HsiMo12O40]·2nmp·H2o

A new composite complex of [La(NMP)₄(H₂O)₄][HSiMo₁₂O₄₀]·2NMP·H₂O (NMP = N-methyl-2- pyrrolidone) was synthesized and characterized by IR, UV, ESR, TG-DTA and single crystal structural analysis. The water and organic ligands (NMP) coordinate directly with La(III) to form a dodecahedral complex and the SiMo₁₂O^4? ₄₀ anion is the counter ion. IR and X-ray analysis show that there is strong interaction between the polyoxometalate and organic donors. The complex is strongly photosensitive under irradiation with sunlight, resulting in a charge-transfer complex by oxidation of the N-methyl-2-pyrrolidone and reduction of the polyoxometalate. Low temperature ESR spectra indicate thermal electron delocalization among the Mo atoms in the title compound.     

硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

Homogenization of parabolic problem with nonlinear transmission condition

In this paper, we investigate the periodic homogenization of nonlinear parabolic equation arising from heat exchange in composite material problems. This problem, defined in periodical domain, is nonlinear at the interface. This nonlinearity models the heat radiation on the interface, which constitutes the transmission boundary conditions, between the two components of the material. The main challenge is, first, to show the well-posedness of the microscopic problem using the topological degree of Leray–Schauder tools. Then, we apply the two scale convergence to identify the equivalent macroscopic model using homogenization techniques. Finally, in order to confirm the efficiency of the homogenization process, we present some numerical results obtained via finite element approximation.     

Synthetic studies towards zetekitoxin AB: preparation of 4,5-epi-11-hydroxy-saxitoxinol

A concise synthesis of 4,5-epi-11-hydroxy-saxitoxinol utilizing d-ribose to direct an asymmetric Mannich reaction. This approach allows many modes of reactivity, which can be used to access various analogs of saxitoxin.     

Influence of thermal and UV treatment on the polypropylene/graphite composite

Electrically conductive polypropylene/graphite (PP/graphite) composites were prepared via blending granulated PP with maleic anhydride grafted PP and natural graphite. Electrical conductivity of prepared samples containing either 65, 70, or 75 wt% of graphite was measured and the most conductive sample containing 75 wt% of graphite was exposed to UV irradiation for 1 and 24 h or thermally treated at 170 °C for 1 h. The influence of thermal and UV exposure on the structural and electrical changes in such treated samples was studied. Local current measurements on the surface were made using scanning spreading resistance microscopy and morphology of the surface was studied by atomic force microscopy. X-ray diffraction analysis, infrared and Raman spectroscopy were also used for the structural characterization. Properties of treated and untreated samples are compared and differences are discussed.