Studies on partial compatibility of PP and PS

<正>Blends of polystyrene(PS) and polypropylene(PP) were prepared through melt compounding.With an increase of PS content up to 30 wt%,the tensile strength of PP/PS blends increased from 37.4 MPa to 42.2 MPa,although the blends were widely regarded as immiscible.The DSC results showed that there's slight decrease in melting temperature of PP, showing insufficient evidence for partial compatibility between PP and PS.Almost no variation of distinct characterization peaks were observed in FTIR spectra of PS/PP blends compared with those of neat PP and PS,indicating there is no chemical interactions between PP and PS.Since the morphology investigation showed a droplet structure as PS content was up to 30 wt%,the improvement of tensile strength could be simply considered as due to the reinforcing effect of dispersed rigid PS particles on the PP,combining with partial compatibility between them as evaluated by change of C_p at glass transition for both PS and PP.More interestingly,DSC and DMA results showed that the blending of PS and PP could lead to a substantial decrease of the glass transition temperature(T_g) of PP,and increase of T_g of PS.The annealing experiment was carried out to understand the change of T_g in PP/PS blends.It is believed that the compressive stress generated by the contracting PP should be the dominant mechanism for the T_g elevation of PS.On the other hand,the T_g decrease of PP is likely owing to the creation of a large amount free interface of PP and the dilatation of the PP phase resulting from the corresponding tension exerted by PS during cooling.     

A new construction of vertex algebras and quasi-modules for vertex algebras

In this paper, a new construction of vertex algebras from more general vertex operators is given and a notion of quasimodule for vertex algebras is introduced and studied. More specifically, a notion of quasilocal subset(space) of for any vector space W is introduced and studied, generalizing the notion of usual locality in the most possible way, and it is proved that on any maximal quasilocal subspace there exists a natural vertex algebra structure and that any quasilocal subset of generates a vertex algebra. Furthermore, it is proved that W is a quasimodule for each of the vertex algebras generated by quasilocal subsets of . A notion of Γ-vertex algebra is also introduced and studied, where Γ is a subgroup of the multiplicative group C^× of nonzero complex numbers. It is proved that any maximal quasilocal subspace of is naturally a Γ-vertex algebra and that any quasilocal subset of generates a Γ-vertex algebra. It is also proved that a Γ-vertex algebra exactly amounts to a vertex algebra equipped with a Γ-module structure which satisfies a certain compatibility condition. Finally, two families of examples are given, involving twisted affine Lie algebras and certain quantum torus Lie algebras.     

Symmetry groups of differential-difference equations and their compatibility

It is shown that the intrinsic determining equations of a given differential-difference equation (DDE) can be derived by the compatibility between the original equation and the intrinsic invariant surface condition. The (2+1)-dimensional Toda lattice, the special Toda lattice and the DD-KP equation serving as examples are used to illustrate this approach. Then, Bäcklund transformations of the (2+1)-dimensional DDEs including the special Toda lattice, the modified Toda lattice and the DD-KZ equation are presented by using the non-intrinsic direct method. In addition, the Clarkson-Kruskal direct method is developed to find similarity reductions of the DDEs.     

The group consensus based evidential reasoning approach for multiple attributive group decision analysis

Many multiple attribute decision analysis problems include both quantitative and qualitative attributes with various kinds of uncertainties such as ignorance, fuzziness, interval data, and interval belief degrees. An evidential reasoning (ER) approach developed in the 1990s and in recent years can be used to model these problems. In this paper, the ER approach is extended to group consensus (GC) situations for multiple attributive group decision analysis problems. In order to construct and check the GC, a compatibility measure between two belief structures is developed first. Considering two experts’ utilities, the compatibility between their assessments is naturally constructed using the compatibility measure. Based on the compatibility between two experts’ assessments, the GC at a specific level that may be the attribute level, the alternative level, or the global level, can be constructed and reached after the group analysis and discussion within specified times. Under the condition of GC, we conduct a study on the forming of group assessments for alternatives, the achievement of the aggregated utilities of assessment grades, and the properties and procedure of the extended ER approach. An engineering project management software selection problem is solved by the extended ER approach to demonstrate its detailed implementation process, and its validity and applicability.     

聚丙烯／顺丁橡胶动态硫化共混物的交联行为和结晶性能的研究

研究了聚丙烯／顺丁橡胶动态硫化共混物橡胶相的交联行为、动态硫化共混物的结晶行为和结晶结构。结果表明，顺丁橡胶的加入对ＰＰ的熔点无明显影响，但结晶度降低。动态硫共化共混物在低于熔点处另有一熔化转变。动态硫化使共混物中ＰＰ的结晶速率提高。     

PA1010/丁基橡胶磺酸盐共混体系组分间相互作用和体系相容性的研究

ＰＡ１０１０／丁基橡胶磺酸锌盐共混体系的ＤＳＣ、ＦＴＩＲ、固体ＮＭＲ结果表明两组份之间存在强的相互作用，ＤＭＡ结果表明随锌盐的比例增加，两组份相容性增加，并产生混合新相。ＰＡ１０１０／丁基橡胶磺酸钠盐共混体系中两组份之间的相互作用不明显，相容性较差。ＳＥＭ结果与上述结果完全吻合。     

THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride)—poly(methyl methacrylate) and chlorinated poly(vinyl chloride)—poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.     

不同链化学结构丁苯橡胶与天然橡胶混容性研究

选择了三种丁苯橡胶 (SBR)———乳聚丁苯胶 (ESBR)、溶聚丁苯C(SSBR (C) )及溶聚丁苯B(SSBR(B) ) ,用红外光谱 (FTIR)分析了它们的链化学结构 .同时 ,用动态力学谱 (DMA)和示差扫描量热谱 (DSC)研究了这三种SBR与天然橡胶 (NR)的混容性 .结果表明 ,SSBR(B)与NR具有很好的混容性 .三种SBR与NR混容性的差别 ,与SBR链化学结构不同有关     

计算高聚物增塑体系混合自由能新方法

高聚物增塑体系混合自由能与浓度关系 ΔGm=f(ω1) ,不仅反映了增塑体系热力学稳定性好坏 ,而且可以预测溶液各组分间的作用能力 [1,2 ] .通过实验可直接得到增塑体系混合自由能的相关数据 ,其中包括偏蒸气压值测量法、渗透压法、反相气相色谱法及小角 X射线散射法等[3～ 8] .这些方法可以测量增塑体系挥发性组分的偏摩尔化学位值 ,利用下面公式计算Δμ1/RT =ln(p1/p1,S)式中 p1,p1,S是某温度下增塑体系增塑剂的偏蒸气压值和纯增塑剂的饱和蒸气压 .1　现有的高聚物混合体系自由能 ηGm计算方法对于低分子溶液体系各组分的偏摩尔化学位Δ…     

端羟基聚丁二烯/增塑剂共混物相容性的分子动力学模拟

固体推进剂和炸药的力学性能在很大程度上依赖于配方中高分子粘结剂与增塑剂的相容性. 本文对相容和非相容两种体系进行了分子动力学(MD)模拟, 以考察分子模拟方法的实用性. 为预测固体推进剂中端羟基聚丁二烯(HTPB)与增塑剂癸二酸二辛酯(DOS)、硝化甘油(NG)的相容性, 采用MD模拟方法在COMPASS力场下, 对HTPB、DOS、NG和共混物HTPB/DOS、HTPB/NG的密度、内聚能密度及溶度参数等进行了模拟计算. 通过比较溶度参数差值(△δ)的大小、分子间径向分布函数和模拟前后体系密度变化情况均可以预测HTPB/DOS属于相容体系,而HTPB/NG属于不相容体系, 与实验结果一致. 径向分布函数分析同时揭示了HTPB/增塑剂组分之间的相互作用及本质. 本文的模拟方法可以作为预测聚合物与增塑剂相容性的有利工具, 也可以为固体推进剂和炸药的配方设计提供理论指导.