Pd nanoparticles on boron doped graphene catalyst for electrochemical detection of hydrogen peroxide prepared by electroless deposition methodEI北大核心CSCD

Taking advantage of large conjugated structure and reductivity of boron-doped graphenethe palladium nanoparticles/boron-doped graphene catalyst was prepared by electroless deposition method using boron-doped graphene as reductant and stabilizer. The average size of palladium nanoparticles highly dispersed on the surface of boron-doped graphene was about 6.5 nm. The electrochemical sensor was prepared by modifying the as-formed catalyst on the surface of glassy carbon electrode. The obtained electrochemical sensor exhibited an excellent electrochemical catalytic activity for H2 O2 . It exhibited high sensitivity with the detection limit as low as 830 nmol/L and good linearity in the range of 2.5-300 μµmol/L for detection of H2 O2 . It could be utilized for the determination of H2 O2 in milk samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

Thermally stimulated depolarization currents, TSDC, wide-angle X-ray scattering, WAXS, differential scanning calorimetry, DSC, and polarized light optical microscopy, PLOM, have been used to examine poly(L-lactide)-b -poly( -caprolactone) diblock copolymers in a wide composition range. Both components are crystallizable and the miscibility in the amorphous phase has been determined from the behavior of the primary relaxations which are the dielectric manifestation of the glass transition, and also from the superstructural morphology revealed by PLOM and the compositional dependence of the melting points as determined by DSC. Distinct segmental mobilities in the amorphous phase which can be well resolved by TSDC are present; the mode of the slower component shifts to lower temperatures as the PCL content increases while the glass transition of neat PCL is present for all compositions. A relaxation times bimodal distribution is apparent for PCL-rich copolymers. The composition dependence of the multiple glass transitions detected in these weakly segregated copolymers are predicted by the self-concentration model for a miscible blend made of components with a large T_g contrast.     

Generalized excluded volume and the diffusivity and viscosity of supercooled liquids and glasses over the entire fragility spectrum

Transport properties of glass-formers near glass transition reflect the varying degrees of the sensitivity of the solid-like dynamics and structures with respect to temperature, depending on their fragility. Notably, however, most glasses resume Arrehenius transport behavior upon onset of vitrification. To address this phenomenon a theory of the self-diffusion coefficient and viscosity is developed on the basis of a model constructed for the generalized excluded volume of glass-formers described by the generic van der Waals equation of state. The molecular clustering behavior of a glass-former is exploited in terms of an order parameter that measures the concentration of glassy, clustered molecules, which is then related to the excluded volume. The formulas arrived therefrom are shown to excellently account for the self-diffusion coefficient and viscosity of various glass-formers over the entire fragility spectrum studied experimentally: e.g., _GeO2${\mathrm{GeO}}_2$, silica, ethanol, glycerol, diopside, propylene carbonate, o$o$-terphenyl, tris-napthylbenzene, toluene, and so on. The excluded volume effect thus investigated is shown to essentially characterize the fragility of the glass-formers. The resulting theory not only predicts for fragile glass-formers to resume Arrehenius transport behavior upon the onset of the glass transition, but also explains a crossover between strong and fragile glass-formers in their diffusivity and viscosity profiles as vitrification sets in.     

Improving copper plating adhesion on glass using laser machining techniques and areal surface texture parameters

Glass is a promising substitute substrate material being evaluated for electronic packaging technology. Improving the electroless copper plated layer adhesion of the glass is one of the most important considerations for development of the technology. An excimer laser (248 nm) was used for structured texturing of glass surfaces (to improve adhesion) by changing mask dimensions, laser operating parameters and overlapping pitch spacing, and therefore producing a range of micro-scale features. Electroless plated copper adhesion strength was assessed using quantitative scratch testing, demonstrating that micro-patterned structures can significantly improve copper/glass adhesion. New ISO 25178 Part 2 areal surface texture parameters were used to characterise the surface roughness of ablated glass surfaces, and correlated to the scratch testing results. Highly correlated parameters were identified that could be used as predictive surface design tools, directly linking surface topography to adhesion performance, without the need for destructive adhesion quantification via scratch testing.     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.     

Immobilization of chiral Rh catalyst on glass and application to asymmetric transfer hydrogenation of aryl ketones in aqueous media

A chiral catalyst, Cp＊RhTsDPEN （Cp＊ = pentamethyl cyclopentadiene, TsDPEN = substitutive phenylsulfonyl-l,2-diphenylethylenediamine）, was synthesized and immobilized at the surface of glass. The immobilized catalyst exhibited good catalytic efficiency for asymmetric transfer hydrogenation of aromatic ketones in water with HCOONa as hydrogen source.     

A novel model for quantification of the moisture absorption of polymeric laminated composites

In the present study, a new model was developed that considers the amount of the environmental fluid absorption by different constituents of polymeric laminated composites including fibers, resin, fiber-matrix interphase region, ply interface region, and voids. By knowing the fluid absorption behavior of the composite constituents, the present model can predict the amount of fluid absorption of different constituents of polymeric laminated composites with an arbitrary resin volume fraction and stacking sequence. Test specimens were fabricated by glass fibers and vinyl ester resin. The environmental fluids, examined in this study, were distilled and saline water under different temperatures and salt concentrations. To investigate the absorption behavior of different constituents of polymeric composite, various tests were conducted on fibers, pure cured resin, unidirectional composite specimens, and laminated composites. Based on the results of the tests, a new theoretical model was developed to quantify and predict the amount of fluid absorption of different constituents of laminated polymeric composites. The thickness of the interphase region between the fiber and matrix was also measured using the scanning electron microscope (SEM) images and nano-indentation tests. The consistency of experimental results with the outcomes of the theoretical model indicates the accuracy of the model.     

Removal of multi-metals from water using reusable pectin/cellulose microfibers composite beads

Pectin (Pec) and cellulose microfibers (CF) extracted from orange waste were combined to form composite beads with enhanced adsorption capacity. Such beads were extensively tested in the removal of multi-metal ions from water. A factorial design approach was conducted to establish the optimum conditions for adsorption of Cd(II), Cu(II), and Fe(II) on Pec-CF beads. Batch adsorption experiments revealed that removal efficiency of such metal ions falls in the range of 94–58% and it followed the order Fe(II) > Cu(II) > Cd(II). The maximum Cd(II), Cu(II) and Fe(II) adsorption capacities calculated from the Langmuir isotherm were 192.3, 88.5 and 98.0 mg/g, respectively. FTIR analysis suggests that the functional groups on Pec-CF beads (binding sites) favor the adsorption of such metal ions. Desorption and reuse experiments demonstrated the beads could be used for at least five consecutive adsorption/desorption cycles. Our finds suggest the Pec-CF beads can serve as an efficient adsorbent for the removal of multi-metal ions from wastewater.     

玻璃基质微流控芯片用于DNA片段的分离和C677T基因突变的快速检测

基于微加工方法,在一般实验条件下,成功地制备了玻璃芯片。利用水溶性聚合物对玻璃通道进行动态修饰,从而抑制了DNA分子的吸附作用,并成功地用于DNA片段的分离和四氢叶酸还原酶基因(MTHFR)中C677T的突变检测。