Anaerobic biological treatment of dye bearing water in anaerobic sequencing batch reactor: Performance and kinetics studies

Textile and dye industries are main sources of dye bearing effluent. In present studies the anaerobic biological degradation of Acid Red 3BN dye water (AR3BNDW) and mixed dye water (MDW) for reduction of color and COD were studied in sequential batch reactor (SBR). The sludge as sources of microorganism was arranged from maize processing bio methanation wastewater treatment plant, which was acclimatized for treatment of AR3BNDW and MDW. After the acclimatization, dyes degradation were studied in SBR At optimum operation condition of hydraulics retention time (HRT) = 2.5 d, and treatment time (t_R) = 16 h, AR3BNDW have gone maximum 87% color reduction of 500 mg/L dye, and 82.8% COD reduction of 380 mg/L COD. At same operating condition, 84.5% color reduction of 500 mg/L dye, and 79.42% COD reduction of 413 mg/L COD achieved for MDW. The second order Grau model was fitted well for COD and dye reductions. The kinetics parameter were evaluated for both the dye water.     

Effect of hybrid fillers on the mechanical behavior of polypropylene based hybrid composites

The present study investigates the effect of hybrid fillers such as graphene nanoplatelets (GnPs) and Titanium di-oxide (TiO₂) in polypropylene (PP) composites on the mechanical properties. The compatibilizing agent of Maleic anhydride grafted polypropylene (MAPP) are used in the polypropylene based composites to increase the interfacial adhesion between matrix and fillers. The experiments are designed according to L₁₆ orthogonal array (OA) based design of experiments (DOE). The parameters selected for this study are GnPs, TiO₂ and MAPP with four different levels are used.By using Orthogonal array and Taguchi based experimental design, the performance characteristics of tensile modulus, tensile strength, elongation at break and toughness can be analyzed with more objective through a small set of experiments.Taguchi based analysis are used to find out the optimal parameters to maximize the tensile properties for the GnPs and TiO₂ reinforced PP hybrid composites. Further, analysis of variance (ANOVA) is investigated to identify the most significant parameters which influence the mechanical properties.From the analysis it was found that the optimal parameters of 3 ?wt% GnPs, 2 ?wt% TiO₂ and 6 ?wt% MAPP for maximum tensile modulus and tensile strength. The most significant parameter for tensile modulus and tensile strength is GnPs followed by TiO₂ and MAPP according to ANOVA analysis.     

Supramolecular optical sensor arrays for on-site analytical devices

Supramolecular optical chemosensors are useful tools in analytical chemistry for the visualization of molecular recognition information. One advantage is that they can be utilized for array systems to detect multiple analytes. However, chemosensor arrays have been evaluated mainly in the solution phase, which limits a wide range of practical applications. Thus, appropriate solid support materials such as polymer gels and papers are required to broaden the scope of the application of chemosensors as on-site analytical tools. In this review, we summarize the actual approaches for the fabrication of solid-state chemosensor arrays combined with powerful data processing techniques and portable digital recorders for real-world applications.     

Cellulose filter paper immobilized α-glucosidase and its application to screening inhibitors from traditional Chinese medicine

In this study, α-glucosidase was successfully immobilized on cellulose filter paper and further applied to screening inhibitors from traditional Chinese medicines combined with capillary electrophoresis analysis. For α-glucosidase immobilization, a cellulose filter paper was used as the carrier and grafted with amino groups by coating chitosan, then α-glucosidase was covalently bonded on the amino-modified carrier via epoxy ring-opening reaction using polyethylene glycol diglycidyl ether as the crosslinker. Several parameters influencing the enzyme immobilization were optimized and the optimal values were enzyme concentration of 4 U/mL, polyethylene glycol diglycidyl ether concentration of 1.25%, chitosan concentration of 7.5 mg/mL, immobilization pH 7.0, crosslinking time of 4 h and immobilization time of 2 h. The immobilized α-glucosidase exhibited good batch-to-batch reproducibility (RSD = 2.1%, n = 5), excellent storage stability (73.5% of its initial activity after being stored at 4°C for 15 days), and reusability (75% of its initial activity after 10 repeated cycles). The Michaelis constant of immobilized α-glucosidase and half-maximal inhibitory concentration of acarbose were calculated to be 1.12 mM and 0.38 μM, respectively. Finally, the immobilized α-glucosidase was used for screening inhibitors from 14 kinds of Traditional Chinese Medicine extracts, and Sanguisorbae Radix showed the strongest inhibitory effect on α-glucosidase.     

Polyimidazolyl acetate ionic liquid grafted on cellulose filter paper as thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water

Recently, pharmaceuticals and personal care products in the water environment exhibited potential risks to both human and aquatic organisms. In order to improve the sensitivity and accuracy of pharmaceutical detection, the polyimidazolyl acetate ionic liquid was synthesized by Radziszewski reaction and coated on cellulose filter papers as a thin-film extraction phase for extraction of non-steroidal anti-inflammatory drugs from water. The attenuated total reflection-infrared spectrometry, thermogravimetric analysis, and scanning electron microscope analyses demonstrated that the polyimidazolyl acetate ionic liquid was successfully prepared and attached to the surface of the cellulose filter paper through chemical bonding. The adsorption capacity of the homemade thin-film extraction material for the four non-steroidal anti-inflammatory drugs was greater than 8898 ng/cm² under the optimum conditions, and the desorption rate was over 90%. Then, a paper-based thin-film extraction phase-high-performance liquid chromatography-tandem mass spectrometry method was established for the extraction of non-steroidal anti-inflammatory drugs in water. This method provided limits of detection and limits of quantification were in the range of 0.02–0.15 and 0.17–0.50 μg/L, respectively. Hence, the obtained thin-film extraction phase showed excellent recovery and reproducibility for the target non-steroidal anti-inflammatory drugs with carboxyl groups from water.     

用于气象观测的阵列式温度传感器流体动力学分析与实验研究

传统百叶箱和防辐射罩内部的温度传感器受到太阳辐射会导致其温度高于大气真实温度, 升温量可达0.8 K甚至更高. 为提高大气温度观测精度, 本文设计了一种阵列式温度传感器. 利用计算流体动力学方法分析计算该传感器在不同环境条件下的辐射升温量, 采用遗传算法对计算结果进行拟合, 获得辐射升温量修正方程. 为验证阵列式温度传感器的实际性能, 研制了强制通风温度测量平台. 将阵列式温度传感器、配有传统防辐射罩的温度传感器和强制通风温度测量平台置于相同环境下, 进行大气温度观测比对实验. 配有传统防辐射罩的温度传感器辐射升温量平均值为0.409 K; 与前者相比, 阵列式温度传感器的辐射升温量仅为0.027 K. 这种阵列式温度传感器可将辐射升温引起的误差降低约93%. 辐射升温量实验测量值与修正方程修正值之间的平均偏移量为0.0174 K, 均方根误差为0.0215 K, 该结果验证了计算流体动力学方法与遗传算法的准确性. 如果配合计算流体动力学方法与遗传算法, 温度测量精度有进一步提高的潜力.     

A waveguide high-pass filter system for measuring the spectrum of pulsed terahertz sources

We propose a system for measuring spectra of terahertz (THz) pulses, including single pulses, which is based on high-pass filters (HPFs). The system consists of channels for measuring amplitudes of pulses (initial pulses and those transmitted via HPFs with different cutoff frequencies) and an algorithm for processing of the obtained data. The pulse spectrum is restored by using the iteration method or the amplitude–frequency method. The iteration method of spectrum restoration is applicable in the range of THz pulse durations from 10⁻⁹ s to 10⁻⁷ s. The amplitude–frequency method is applicable to THz pulses with durations exceeding 10⁻⁸ s. The system for measuring of THz pulse spectra was simulated by using the characteristics of specially developed waveguide HPFs. The relative simulation error of determining the central frequency by the amplitude–frequency method is equal to 2 · 10⁻⁶ for THz pulse durations of 10⁻⁵ s and longer.     

An evaluation method based on absolute difference to validate the performance of SBNUC algorithms

Scene-based non-uniformity correction (SBNUC) algorithms are an important part of infrared image processing; however, SBNUC algorithms usually cause two defects: (1) ghosting artifacts and (2) over-correction. In this paper, we use the absolute difference based on guided image filter (AD-GF) method to validate the performance of SBNUC algorithms. We obtain a self-separation source using the improved guided image filter to process the input image, and use the self-separation source to obtain the space-high-frequency parts of the input image and the corrected image. Finally, we use the absolute difference between the two space-high-frequency parts as the evaluation result. Based on experimental results, the AD-GF method has better robustness and can validate the performance of SBNUC algorithms even if ghosting artifacts or over-correction occur. Also the AD-GF method can measure how SBNUC algorithms perform in the time domain, it’s an effective evaluation method for SBNUC algorithm.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.