纳米Cu颗粒等温晶化过程的分子动力学模拟研究

采用分子动力学方法和镶嵌原子势,模拟了500个Cu原子(简称Cu₅₀₀) 组成的纳米颗粒的等温晶化过程.利用修正的均方位移、键对分析技术和内在结构(IS) 等方法对该过程中的结构和动力学行为进行分析研究.结果显示:与块体金属不同的是, Cu₅₀₀纳米颗粒在某一温度保温时,其晶化时间并不是一个定值, 而是存在一个统计分布,并且保温温度越低其晶化时间的分布范围越广, 最长晶化时间越长.在低温晶化时, Cu₅₀₀经历了一系列中间构型的转变才达到晶态, 表现出多步晶化的特征.文章作者研究了颗粒的初始构型对晶化进程的影响, 发现颗粒的初始结构特征和能量状态对其随后的晶化过程有着重要的影响, 同一温度下,颗粒初始构型的IS能量越低其晶化时间越长,这一点在低温时尤其明显.     

微波消解-FAAS法测定三种蒙成药中铜、铁、锰、钙和镁

微波消解 -火焰原子吸收分光光度法测定蒙成药中 5种金属元素。实验结果表明 ,微波消解方法简便 ,消化时间短 ;测试方法具有较好的精密度和准确度     

Cu2+对鲁米诺阳极电致化学发光的抑制作用

本文研究了Ｃｕ＾２＋对碱性鲁米诺阳极电致化学发光的影响,发现Ｃｕ＾２＋对发光峰强度有明显的抑制作用。通过对溶液ｐＨ值及离子强度、溶液中支持电解质种类、理米诺浓度和ＥＤＴＡ对抑制作用影响的讨论,结合Ｐｔ电极表现ＸＰＳ谱图的分析结果,给出了可能的抑制机理;非常微小的Ｃｕ（ＯＨ）２分子聚体参与了电极氧化过程中双电层的形成,阻碍了电化学发光活性物质的生成和传质速率。在一定条件下,发光峰强度的减小量与Ｃｕ＾     

Influence of one CO molecule on structural and electronic properties of monatomic Cu chain

By using first-principles calculations, we have systematically investigated the structural and electronic properties of an infinite linear monatomic Cu chain with an adsorbed CO molecule. We find that the bridge geometry is energeticabsally favored not only when the Cu–Cu bond below the molecule is unstretched, but also for a wide range of d_Cu–Cu up to about 4.20 Å, while the substitutional geometry is favored only in the hyperstretched situation d_Cu–Cu>4.80 Å. Charge density differences point out the electron transfer is from the Cu atoms to the adsorbed CO molecule. The binding mechanism of CO to Cu chain can be described by the Blyholder’s model, in terms of σ-donation of electron density from the nonbonding CO-5σ orbital into empty metal orbitals and π-backdonation from the occupied metal d orbitals to empty CO-2π^⁎ orbital. The donation/backdonation process leads to the formation of bonding/antibonding pairs, 5σ_b/5σ_a and 2π_b^⁎/2π_a^⁎, with the 5σ_a lying above E_f and the 2π_b^⁎ below E_f.     

Preconcentration of Trace Cu(II) in Water Samples with Nano-Sized ZnO and Determination by GFAASSCIEI北大核心CSCD

The content of copper in natural water is very low, and direct determination is difficult. Therefore, it is very meaningful for the combination of efficient separation-enrichment technology and highly sensitive detection. Based on the high adsorption capacity of Cu(II) onto nano-sized ZnO, a novel method by using nano-sized ZnO as adsorbent and graphite furnace atomic absorption spectrometry as determination means was in this work. The adsorption behaviors of Cu(II) on nano-sized ZnO was studied. Effects of acidity, adsorption equilibrium time, adsorbent dosage and coexisting ions on adsorption rates were investigated. The results showed that the adsorption efficiency was above 95% in a pH range from 3.0 to 7.0. Compared with other adsorbents for trace element enrichment such as activated carbon, nano-sized TiO2 powder, the most prominent advantage is nanosized ZnO precipitate with the concentrated element can directly dissolved in HCl solution without any filtration and desorption process can directly analyzed by graphite furnace atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry. Compared with colloid nano materials, nano-sized ZnO is the true solution after dissolving have small matrix effect and viscosity more suitable for graphite furnace atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry detection. The proposed method possesses low detection limit (0.13 mu g.L-1) and good precision (RSD=2.2%). The recoveries for the analysis of environmental samples were in a rang of 91.6%-92.6% and the analysis results of certified materials were compellent by using the proposed method.     

ICP-AES法同时测定硝酸锶晶体中十种掺杂元素

本文报道了用ＩＣＰ－ＡＥＳ法同时测定硝酸锶晶体中掺杂元素Ａｇ、Ｃａ、Ｃｅ、Ｃｕ、Ｆｅ、Ｌａ、Ｍｇ、Ｍｎ、Ｎａ、Ｚｎ的分析方法。本方法采用基体匹配法与背景扣除法对基体干扰及光谱干扰进行校正,被测元素检出限为０．１－１６ｎｇ／ｍＬ,合成样品的回收率为９０％－１１６％。相对标准偏差均小于１３％。本法简便、快速、准确。     

为什么水在金属表面的吸附构型是倾斜的——水在铜、铝表面吸附的量子化学计算

用量子化学从头算方法,分别以原子簇Ｃｕ５、Ａｌ４、Ａｌ１０模拟Ｃｕ（１００）和Ａｌ（１１１）表面,在不同基组水平上,计算了水在两种金属表面上倾斜吸附的热能面,结果表明：当计算基组中不含氧原子的ｄ轨道时,得到水分子在金属垂直吸附的构型,这与实验结果不符;当水中氧原子加极化函数时,水分子倾斜吸附时能量较低,得到与实验相符的吸附构型。这说明水中氧原子ｄ轨道在计算中起着关键作用,在成键过程中有着重要影响。     

Cu掺杂ZnO稀磁半导体磁电性能影响的模拟计算

在Cu重掺杂量摩尔数为0.02778–0.16667的范围内, 对ZnO掺杂体系磁电性能影响的第一性原理研究鲜见报道. 采用基于自旋密度泛函理论的平面波超软赝势方法, 用第一性原理计算了两种不同Cu单掺杂量Zn_1-xCu_xO (x=0.02778, 0.03125)超胞的能带结构分布和态密度分布. 结果表明, 掺杂体系是半金属化的稀磁半导体; Cu掺杂量越增加、相对自由空穴浓度越增加、空穴有效质量越减小、电子迁移率越减小、电子电导率越增加. 此结果利用电离能和Bohr半径进一步获得了证明, 计算结果与实验结果相符合. 在限定的掺杂量0.02778–0.0625 的条件下, Cu单掺杂量越增加、掺杂体系的体积越减小、总能量越升高、稳定性越下降、形成能越升高、掺杂越难. 在相同掺杂量、不同有序占位Cu双掺ZnO体系的条件下, 双掺杂Cu-Cu间距越增加, 掺杂体系磁矩先增加后减小; 当沿偏a轴或b轴方向Cu–O–Cu相近邻成键时, 掺杂体系会引起磁性猝灭; 当沿偏c轴方向Cu–O–Cu相近邻成键时, 掺杂体系居里温度能够达到室温以上的要求. 在限定的掺杂量0.0625–0.16667的条件下, 沿偏c轴方向Cu–O–Cu相近邻成键时, Cu 双掺杂量越增加, 掺杂体系总磁矩先增加后减小. 计算结果与实验结果变化趋势相符合.     

铜锌锡硫薄膜材料及其器件应用研究进展

铜锌锡硫薄膜材料组成元素储量丰富, 环境友好, 成本低廉, 成为最具前景的薄膜材料之一. 目前, Cu₂ZnSn(S, Se)₄ (CZTSSe)薄膜太阳电池的最高转换效率已经达到12.6%. 本文总结了Cu₂ZnSnS₄ (CZTS)的发展历史, 依次介绍了CZTS薄膜材料的结构特性、光学特性、电学特性、界面特性和Na对CZTS 薄膜的影响, 详细介绍了CZTS薄膜的制备方法及器件应用的最新研究进展, 总结了目前CZTS薄膜太阳电池发展中存在的问题, 展望了今后的研究方向.     

���ں˾۱�װ�õ�W/Cu ���ܲ������Ʊ�����������о�

采用了两步热等静压法制备W/Cu 穿管部件,即先用热等静压(930℃,100MPa,2h)在钨块的孔内壁上覆一层无氧铜作为中间层,然后再用热等静压工艺(600℃,100MPa,2h)把W/Cu 复合块与CuCrZr 管串接起来。经过高热负荷辐照测试,部件经受住了1000 次10MW•m−2 高热负荷的辐照,满足使用要求。