四溴代对苯二甲酸及2，2′-联吡啶构筑的铜配位聚合物的合成、晶体结构及热稳定性

以四溴代对苯二甲酸(H2TBTA)与2,2′-联吡啶(2,2′-bipy)为配体,与硝酸铜在水和甲醇混合溶剂中合成了1个一维铜配合物{[Cu(2,2′-bipy)(TBTA)(H2O)].H2O}n,并通过元素分析、红外分析、热重分析、X-射线粉末衍射和X-射线单晶衍射对其进行了表征。该配合物属于正交晶系,空间群为Pna21,a=1.399 9(11)nm,b=0.929 3(7)nm,c=1.557 9(11)nm,V=2.027(3)nm3,Z=4,R1=0.053 5。中心Cu(Ⅱ)离子处于一个五配位环境中,且在配合物中存在着π-π相互作用和氢键作用。热重分析表明该配合物在203℃开始发生分解。     

新型罗丹明型荧光探针的合成及其对Cu(Ⅱ)的识别性能

罗丹明B-酰肼和8-羟基-7-喹啉醛经缩合反应合成了一个新型的荧光探针(L),其结构经1H NMR,MS和元素分析表征。考察了L对金属离子的识别性能,结果表明:在乙腈溶液[V(MeCN)∶V(H2O)=19∶1,pH7.0]中,L可高选择性的识别Cu(Ⅱ)。Cu(Ⅱ)能诱导L内酰胺结构开环并形成1∶2型的配合物L-Cu(Ⅱ),这一过程是可逆的。     

The use of a polymer inclusion membrane in a paper-based sensor for the selective determination of Cu(II)

A disposable paper-based sensor (PBS) is described for the determination of Cu(II) in natural and waste waters at approximately 2 cents per measurement. The device makes use of a polymer inclusion membrane (PIM) to provide the selectivity for Cu(II). The PIM consists of 40 wt% di(2-ethlyhexyl) phosphoric acid (D2EHPA) as the carrier, 10 wt% dioctyl phthalate (DOP) as a plasticizer, 49.5 wt% poly(vinyl chloride) (PVC) as the base polymer and 0.5 wt% (m m⁻¹) 1-(2′-pyridylazo)-2-naphthol (PAN) as the colourimetric reagent. High selectivity under mildly acidic conditions (HCl, pH 2.0) is achieved for Cu(II) in the presence of frequently encountered metal ions in natural and waste waters such as Fe(III), Al(III), Zn(II), Cd(II), Pb(II), Ca(II), Mg(II), and Ni(II).     

Efficient Synthesis of β-Hydroxy Sulfides and β-Hydroxy Sulfoxides Catalyzed by Cu/MgO Under Solvent-Free Conditions

Regio-, stereo-, and chemoselective ring opening of epoxides with thiols using Cu/MgO as a heterogeneous catalyst has efficiently been carried out to produce the corresponding β-hydroxy sulfides in excellent yields at room temperature under solvent-free conditions. The treatment of the epoxides with thiols and 50% aqueous H₂O₂ in the presence of the same catalyst at room temperature affords the β-hydroxy sulfoxides in excellent yields.     

Cu(OTf)2-Catalyzed 1,2,3-triazole-ring-controlled selective phenolic O–H bond methylthiomethylation

Copper-catalyzed selective methylthiomethylation of 1,4-disubstituted 1,2,3-triazole phenols using DMSO as a methylthiomethylation reagent was achieved. Controlled by the triazole ring, the ortho-phenolic hydroxyl in N(1) aryl can be selectively methylthiomethylated, generating functionalized 1,4-disubstituted 1,2,3-triazoles bearing aryl methylthiomethyl ether fragment.     

Copper-Catalyzed Cyanopropylation of Activated Alkenes

A practical copper-catalyzed alkylarylation of activated alkenes with azobisisobutyronitrile (AIBN) and beyond has been developed, in which incorporation of 3^o nitrile moiety into an oxindole scaffold proceeded smoothly through cascade radical addition/C(sp²)-H cyclization. The use of readily available AIBN as radical source and inexpensive CuI as catalyst, as well as broad substrate scope and the simplicity of operation and handling, make this protocol a highly attractive approach to oxindoles bearing 3^o nitrile moiety.     

Solvent‐Free Chemoselective Synthesis of 1,1‐Diacetates Catalyzed by Cu(NO3)2 · 3H2O

1,1‐Diacetates have been synthesized by the reaction of a variety of aldehydes with acetic anhydride in the presence of cupric nitrate as catalyst under solvent‐free conditions. Ketones were not converted to the corresponding diacetates under these conditions.     

The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface

Band alignment at CdS/Cu₂ZnSnSe₄ heterojunction interface is studied by X‐ray photoemission spectroscopy. The Cu₂ZnSnSe₄ thin films are prepared by selenization of electrodeposited Cu‐Zn‐Sn precursors. CdS overlayers with different thickness are sequentially grown on the Cu₂ZnSnSe₄ substrate by pulsed laser deposition process. Photoemission spectra are obtained before and after each growth to study the conduction and valence band offsets at the heterojunction interface. The determined conduction band offset of 0.34 eV indicates a spike‐like ‘type I’ band alignment at CdS/Cu₂ZnSnSe₄ interface. The spike will avoid interface recombination, and it is low enough that electron could transfer from the Cu₂ZnSnSe₄ layer to the buffer layer which is suitable for solar cell's fabrication. Copyright © 2012 John Wiley & Sons, Ltd.     

Multifractal analysis for Cu/Ti bilayer thin films

Two bilayer thin films with different stacking sequences, Cu/Ti/Si and Ti/Cu/Si, were deposited by DC magnetron sputtering technique. X‐ray diffraction technique was used to measure the crystallization structures, and scanning electron microscopy and atomic force microscopy were used to measured surface morphology. The multifractal spectra f(α)‐α was used to characterize the surface morphology. The result of |q|_max ≤ 53 is obtained by multifractal analysis. The shape of the multifractal spectra f(α) ? α is hook‐like for Cu/Ti/Si and bell jar‐like for Ti/Cu/Si. The spectrum width Δα = α_max ? α_min and Δf(=f(α_min) ? f(α_max)) of the multifractal spectra is able to quantitatively analyze the growth and surface roughness of the Cu/Ti bilayer thin films. The surface of Ti/Cu/Si thin film is more uniform and smoother than the film of Cu/Ti/Si. Copyright © 2013 John Wiley & Sons, Ltd.