In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

The response of microstructure to processing in a series of poly(siloxaneimide) copolymers

Poly(siloxaneimide) (PSI) segmented copolymers exhibit organized microdomains if the blocks are sufficiently incompatible. As with neat diblock and triblock copolymers, the processing route employed to prepare films of PSI materials is expected to influence the dimensions and/or morphology of the resultant microstructure. In this work, small-angle neutron scattering (SANS) is utilized to characterize the disordered microstructure found in films of a series of PSI copolymers which are subjected to solvent casting and various thermal treatments. Microstructural dimensions such as the periodicity and correlation length are deduced from the Teubner-Strey (TS) model for disordered microemulsions. The scattering intensity of each copolymer up to q = 5.0 nm^?1, where q is the scattering vector, is found to scale as q^?2.8+?0.1. Results indicate that processing the materials as cast films or as melt-pressed films allowed to cool slowly has a small, but discernible, effect on microstructural characteristics. SANS profiles of films quenched from elevated temperatures reveal a clear transition in microdomain periodicity, which correlates well with the glass transition temperature of the imide microphase in these and other materials of similar chemical structure. © 1993 John Wiley & Sons, Inc.     

Chemiluminescent determination of reactive hydrocarbons

Summary Chemiluminescent reactions of ozone with several classes of compounds at different temperatures are described. In a reaction chamber in front of a photomultiplier ozone is mixed with the compounds studied such as alkanes, olefins, alcohols, aromatics, C₂H₂, NO, vinyl chloride or H₂S. The chemiluminescent emission is proportional to the concentration of the compound involved. At room temperature only olefinic hydrocarbons respond but at temperatures above 150°C also a response for alkanes, alcohols, CO etc. is obtained. It is suggested that next to the ozonide-excited formaldehyde mechanism the CO-CO ₂ ^* mechanism is responsible for the chemiluminescent emission at high temperature. A detection limit of a few ppb is achieved. Possible applications are a selective gas-chromatographic detector, an air pollution monitor for instance for CO, and a photochemical reactivity monitor.

---

Bestimmung reaktiver Kohlenwasserstoffe durch Chemiluminescenz

Zusammenfassung Chemiluminescenzreaktionen von Ozon mit verschiedenen Verbindungsgruppen (hauptsächlich Kohlenwasserstoffe) bei unterschiedlichen Temperaturen werden beschrieben. In einer Reaktionskammer werden die Verbindungen vor einem Photomultiplier mit Ozon vermischt. Es handelt sich u. a. um folgende Verbindungstypen: Alkane, Olefine, Alkohole, Aromaten, C₂H₂, NO, Vinylchlorid, H₂S. Die Emissionsintensität ist proportional der Konzentration. Bei Raumtemperatur sprechen nur Olefine an, die übrigen Verbindungen erst über 150°C. Die Emission bei höherer Temperatur wird neben der Bildung von Formaldehyd auf die Reaktion CO-CO ₂ ^* zurückgeführt. Die Nachweisgrenze beträgt wenige ppb. Als mögliche Anwendungsgebiete werden ein selektiver GC-Detektor, ein Monitor für Luftverunreinigungen (z.B. für CO) sowie ein Monitor zur Messung photochemischer Reaktivität der Luft genannt.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria.     

R?ntgenspektrometrische Elementbestimmung in Abwasser: Probenvorbereitung und Matrixkorrekturverfahren

Zusammenfassung Für Elementbestimmungen in Abwasser wird ein Röntgenfluorescenzverfahren beschrieben. Zur Probenvorbereitung werden die Elemente durch Gefriertrocknung auf einem inerten Träger angereichert. Diese Anreicherung ist nicht selektiv und erfaßt praktisch alle in Abwasser gelösten und suspendierten Verunreinigungen. Für die Berechnung der Elementkonzentrationen aus den gemessenen Fluorescenzintensitäten wird ein Matrixkorrekturverfahren angegeben, welches dem unterschiedlichen Absorptionsverhalten der Probenmatrix Rechnung trägt. Die Massenabsorptionskoeffizienten werden durch Messung der diffus gestreuten Bremsstrahlung bzw. der Comptonstreustrahlung ermittelt. Die Selbstabsorption des zu bestimmenden Elementes wird rechnerisch berücksichtigt. Das Korrekturverfahren kann auf alle mit Röntgenfluorescenzanalyse bestimmbaren Elemente angewendet werden.

---

Determination of elements in waste water by x-ray fluorescence analysis: Sample preparation and matrix correction method

Summary For sample preparation the elements are enriched upon an inert carrier by freeze-drying. This enriching procedure is not selective and collects all dissolved and suspended contaminations from the waste water. In order to calculate the element concentrations from the measured fluorescence intensities a matrix correction method is given which considers the different absorption behaviour of the matrix. The mass absorption coefficients are obtained by measuring the scattered X-ray tube spectrum or a Compton scattered X-ray tube line, respectively. The self-absorption of the element to be determined is taken into account. The correction method is applicable to all elements detectable by X-ray fluorescence.

Herrn Dr. H. Wagner danken wir für das stete Interesse, die zahlreichen konstruktiven Diskussionen und die Hilfe beim Abfassen des Manuskripts.     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.     

Study of air pollution particulates by X-ray photoelectron spectroscopy

Summary This paper discusses the application of X-ray photoelectron spectroscopy to the determination of the chemical composition of sulfur and nitrogen species in air pollution particulates. Core electron chemical shift measurements are augmented by the determination of relative concentrations and volatility of particulate species.

---

Untersuchung von Verunreinigungsteilchen in der Luft durch Röntgenphotoelektronen-Spektroskopie

Zusammenfassung Die Anwendung der Röntgenphotoelektronen-Spektroskopie auf die Bestimmung der chemischen Zusammensetzung von Schwefel und Stickstoff enthaltenden Verunreinigungsteilchen in Luft wird diskutiert. Messungen der chemischen Verschiebung werden ergänzt durch die Bestimmung der relativen Konzentrationen und der Flüchtigkeit der Verbindungen.

Presented at the 6th Annual Symposium on Recent Advances in the Analytical Chemistry of Pollutants, April 21–23, 1976; Vienna, Austria.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

Volume and compressibility changes of complex formation between 18-Crown-6 and NaCl,KCl, and CsCl in water

The apparent molal volumes and compressibilities of NaCl, KCl, and CsCl in mixtures of 18-Crown-6 and water have been calculated from density and speed-of-sound measurements at 25°C. The partial molal volumes and compressibilities of the salts when all cations have formed complexes with 18-Crown-6 molecules have been evaluated. The sign and magnitude of the volume and compressibility changes of complex formation strongly suggest that the charge of the cation becomes very effectively screened by the crown ether.