光纤传感器低温啁啾现象的分析

介绍了光纤光栅传感原理,依据传感机理制作了两种结构材料的光纤光栅传感器,对它们进行了试验,将试验后的传感数据进行了拟合分析和比对,并对它们在低温环境下产生的啁啾现象进行了分析,验证了采用预拉工艺对解决啁啾现象的可行性。     

On the evaluation of bragg intensities in the low-temperature phase of C60

The temperature dependence of Bragg intensities in C₆₀ is discussed for the simple cubic Pa3 phase occurring below 260 K. It is shown that, generally, the intensities of Bragg reflections may be surprisingly strongly affected even by seemingly minor variations of certain parameters. Among these the most important are the respective molecular orientational angles of the so-called pentagon and hexagon orientations, the fractions of molecules adopting these orientations and the lattice parameter. Correct determination of the Debye-Waller factor is found to be unusually difficult because of this behaviour. Numerical calculations are used to provide explicit examples and lead to the conclusion that the evaluation of Bragg intensities in this system requires considerable care.     

The research on temperature measurement based on polarization dependent loss

This paper analyzes the properties of reflected polarization dependent loss of apodized fiber Bragg gratings with temperature effective. We simulates reflected spectrum and polarization dependent loss of the apodized fiber Bragg gratings. The reflected spectrum and polarization dependent loss are measured under different temperatures. The analysis results show that reflected polarization dependent loss presents two peaks which shift an equal proportion to long wavelength with temperature increasing and have very good stability so we propose an idea that use polarization dependent loss as temperature sensor measurement parameters. The results show that the accuracy of measurement can be increased almost by one order of magnitude.     

Observation of field induced anomalous quantum criticality in Ce0.6Y0.4NiGe2 compound

We report the results of our investigation of magnetization and heat capacity on a series of compounds Ce${}_{1?x}$Y_xNiGe₂ ($x=0.1,0.2\text{ and }0.4$) under the influence of external magnetic field. Our studies of the thermodynamic quantity $?\mathrm{d}M/\mathrm{d}T$ on these compounds indicate that magnetic frustration persists in Ce_0.9Y_0.1NiGe₂, as also reported for the parent compound CeNiGe₂. The weak signature of this frustration is also noted in Ce_0.8Y_0.2NiGe₂, whereas, it is suppressed in Ce_0.6Y_0.4NiGe₂. Heat capacity studies on Ce_0.9Y_0.1NiGe₂ and Ce_0.8Y_0.2NiGe₂ indicate the presence of a new magnetic anomaly at high field which indicates that quantum criticality is absent in these compounds. However, for Ce_0.6Y_0.4NiGe₂ such an anomaly is not noted. For this later compound, the magnetic field (H) and temperature (T) dependence of heat capacity and magnetization obey $H/T$ scaling above critical fields. However, the obtained scaling critical parameter (δ) is 1.6, which is away from mean field value of 3. This deviation suggests the presence of unusual fluctuations and anomalous quantum criticality in these compounds. This unusual fluctuation may arise from disorderness induced by Y-substitution.     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Crystal planes and reciprocal space in Clifford geometric algebra

This paper discusses the geometry of kD crystal cells given by (k+ 1) points in a projective space ?^{n+ 1}. We show how the concepts of barycentric and fractional (crystallographic) coordinates, reciprocal vectors and dual representation are related (and geometrically interpreted) in the projective geometric algebra Cl(?^{n+ 1}) (see (Die Ausdehnungslehre von 1844 und die Geom. Anal. Teubner: Leipzig, 1894)) and in the conformal algebra Cl(?^{n+ 1, 1}). The crystallographic notions of d‐spacing, phase angle, structure factors, conditions for Bragg reflections, and the interfacial angles of crystal planes are obtained in the same context. Copyright © 2011 John Wiley & Sons, Ltd.     

Study of the Molecular Mobility in Polymers with the Thermally Stimulated Recovery Technique—A Review

Thermally stimulated recovery (TSR) is a non‐conventional mechanical spectroscopy technique that allows to analyse in detail the relaxation processes of polymeric systems in the low frequency region. This work reviews the main aspects and potentialities of this technique. The different kinds of TSR experiments that can be performed, global and thermal sampling (TS) experiments, are described and illustrated with several examples. Also, the different methods for the determination of the thermokinetic parameters (activation energy and pre‐exponential factor) of the thermal sampling (TS) procedure are explained and compared. In this context, the compensation phenomenon, which always appears in TSR results when the studies are performed in the glass transition region of a given system, is discussed. Examples of the application of this technique to different polymeric systems during the last 20 years are provided. An emphasis will be made on the analysis of the effect of crystallinity degree and crosslink density on the TSR response. A comparison between the results (characteristic times and activation energies) obtained by different techniques, namely TSR, dynamic mechanical analysis (DMA), and differential scanning calorimetry (DSC), is made.     

Comparison of an antibody and its recombinant derivative for the detection of the small molecule explosive 2,4,6-trinitrotoluene

Antibodies are commonly used as recognition elements in immunoassays because of their high specificity and affinity, and have seen extensive use in competitive assays for the detection of small molecules. However, these complex molecules require production either in animals or by mammalian cell cultures, and are not easily tailored through genetic manipulation. Single chain antibodies (scFv), recombinantly expressed molecules consisting of only the antibody's binding region joined via a linking peptide, can provide an alternative to intact antibodies. We describe the characterization of a new monoclonal antibody (mAb), 2G5B5, able to detect the small molecule explosive 2,4,6-trinitrotoluene (TNT) and the scFv derived from its variable regions. The mAb and scFv were tested by surface plasmon resonance to determine their affinity for an immobilized TNT surrogate; dissociation constants were determined to be 1.5 × 10⁻¹³ M and 4.8 × 10⁻¹⁰ M respectively. Circular dichroism was used to determine their melting temperatures. The mAb is more stable melting at ∼75 °C while the scFv melts at ∼65 °C. The recognition elements were incorporated into a competitive assay format using a bead-based multiplexing platform to examine their sensitivity and specificity. The scFv was able to detect TNT ∼10-fold more sensitively than the mAb in this assay format, allowing detection of TNT concentrations down to at least 1 μg L⁻¹. The 2G5B gave similar detection limits to a commercial anti-TNT mAb, but was less specific, recognizing 1,3,5-trinitrobenzene (TNB) equally well as TNT.