Polyurethane Ionomers from Cycloaliphatic Diisocyanate and Polytetramethylene Glycol

Abstract

Segmented polyurethane (PU) ionomers were prepared from cycloaliphatic diisocyanate [methylene bis(4-cyclohexyl isocyanate) (H₁₂MDI) and isophoron diisocyanate (IPDI)] and polytetramethylene glycol (PTMG) by using an anionic-type chain extender, viz., dimethylol propionic acid (DMPA). The effect of ionic content and butanediol (BD) on the state of dispersion and physical properties of emulsion-cast film was determined using Autosizer, transmission electron microscopy (TEM), Instron, and Rheovibron. With increased incorporations of DMPA in PU, particle size of emulsion decreased asymptotically, tensile modulus and strength increased, and the glass transition temperature (T _g) moved toward the higher temperature. On the other hand, with increased incorporation of BD in PU, particle size of emulsion, tensile modulus, and strength of the emulsion cast film increased, and the major transition of soft segment moved toward higher temperature. With regard to the structural effect of the isocyanate, H₁₂MDI gave finer dispersion and better mechanical properties over IPDI.     

Crystallizable Polyphenylacetylene-Preparation and Solution Properties

The molecular weight distribution (MWD) of crystallizable polyphenylacetylene prepared near room temperature in the presence of ferric acetylacetonate and triethylaluminum was determined through use of fractions characterized by vapor pressure osmometry and gel permeation chromatography (GPC). The number- and weight-average molecular weights (M _n and M _w) are both less than the molecular weight corresponding to the maximum of the weight distribution function, which lacks a high molecular weight tail. M _wandM _n is less than is consistent with models allowing for chain termination characteristic of vinyl polymers. GPC elution volumes are much less than those characteristic of polystyrene of similar molecular weight, and the Mark-Houwink exponent is high (2.4 for M _v 4800 to 6800). These data indicate more rodlike behavior than for polystyrene of equivalent molecular weight. The MWD and other data suggest intramolecular chain termination, possibly associated with the molecule's tendency to form paramagnetic defect states.     

A novel covalent functionalisation of poly (styrene-alt-maleic anhydride) with 4-amino benzo-9-crown-3 ether

The grafting of 4-amino benzo-9-crown-3 ether to poly (styrene-alt-maleic anhydride) has been described. The covalent grafting of crown ether has led to a considerable increase in the solubility of polymer in organic solvents such as dimethyl sulphoxide, dimethylformamide and tetrahydrofuran. The highest solubility was attained in DMF and DMSO. The covalently bonded 4-benzo-9-crown-3 ether allowed the hosting of Li⁺. The covalently grafted crown ether to polymer was identified by infrared spectroscopy and thermogravimetric analysis methods.     

Swelling Ratios and Rates of Sulfonation of Solvent Modified Copolymers of Styrene Cross-Linked with Pure m-and Pure p-Divinylbenzene

Solvent-modified (toluene) copolymers have been prepared from styrene cross-linked with commercial divinylbenzene, m-divinylbenzene, and p-divinylbenzene at divinyl monomer contents of 16 mole % and 32 mole % at F_M = 0.50. The resultant copolymers have been characterized by swelling-ratio determinations and rates of sulfonation at 60 and 80°C. The solvent-modified 16 mole % cross-linked copolymers sulfonated at rates slightly greater than those characterizing the 8 mole % cross-linked copolymers prepared in the absence of diluent. The order of decreasing sulfonation rates for both the conventional 8 mole % cross-linked systems and for the solvent-modified 16 mole % cross-linked copolymers is commercial divinylbenzene/styrene, p-divinylbenzene/styrene, m-divinylbenzene styrene. The 32 mole % cross-linked systems exhibit a different order of decreasing sulfonation rates: commercial divinylbenzene/styrene, m-divinylbenzene/styrene, p-divinylbenzene/styrene. The swelling ratios of the 32 mole % solvent-modified copolymers were comparable to those of the conventional 8 mole % cross-linked systems.     

Deep eutectic solvents and glycerol: a simple,environmentally benign and efficient catalyst/reaction media for synthesis of N-aryl phthalimide derivatives

Abstract

Deep eutectic solvents (DES) and glycerol have been successfully employed as efficient catalysts/reaction media in the synthesis of N-aryl phthalimide derivatives from phthalic anhydride and primary aromatic amines. The DES prepared from choline chloride and malonic acid proved to be an efficient catalyst whereas glycerol and the DES of choline chloride and urea played a dual role of catalyst and solvent. These mixtures are biodegradable, nontoxic, and cost-effective thereby providing a good industrial alternative to conventional methods. These methods gave products in moderate to high yields with good recyclability of catalyst/solvent at least up to five consecutive runs.     

Mild,Rapid, and Inexpensive Microwave-Assisted Synthesis of Allylic and Propargylic Esters

A variety of allylic and propargylic esters were rapidly prepared via microwave heating of their corresponding mixed anhydride derived from pivaloyl chloride. The reaction conditions were modified to account for the sterics of the alcohol and the electronics of the carboxylic acid.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

SDS/Ac2O/H2O: Surfactant‐Mediated Cleavage of Imines with Acetic Anhydride to Carbonyls and Acetanilides in Water

Surfactant (SDS)‐mediated cleavage of imines was achieved with acetic anhydride to the corresponding carbonyls (aldehydes and ketones) and acetanilides in water at 25–30°C with very good to excellent yields, thus contributing significantly to the green chemistry concept.     

RuCl3 · xH2O: A New Efficient Catalyst for Facile Preparation of 1,1‐Diacetates from Aldehydes

An efficient, facile preparation of aldehyde 1,1‐diacetates (acylals) in excellent yields catalyzed by RuCl₃ · xH₂O is described. Ketones do not react under these conditions.     

Synthesis of Acylated Steroidal Olefins and Their Derivatives

Acylation of cholest-5-ene and cholest-5-ene 3-one with anhydrides in the presence of zinc chloride and characterization of products thus obtained on the basis of elemental analysis, spectral data, and chemical transformations are reported.     

Preparation the Esters of Oleic Acid-Maleic Anhydride Copolymer and Their Evaluation as Flow Improvers for Waxy Crude Oil

Five comb-like copolymers derived from oleic acid-maleic anhydride were prepared and then esterified by long-chain fatty alcohol (POMA C_n), where n = 18, 20, 22. These polymers were characterized by FTIR and ¹H NMR analysis. The molecular weight was determined by using gel permeation chromatography (GPC). The prepared copolymers were investigated as flow improvers and pour point depressants (PPD) for crude oil. From the evaluation, it was found that, the maximum depression of PP was obtained by (POMA₂ C₂₂) with long-chain alcohol (C₂₂–OH) from 27°C to 15°C (ΔPP_3000ppm = ?12°C). On the other side, it was remarked that no depression obtained by (POMA₂ C₁₈), which esterified by alcohol (C₁₈–OH) at the same condition. The depression of pour point effectiveness was discussed on the light of polymers structure, molecular weights, and their concentrations. By analysis the results of the rheological flow properties, it was found that the POMA₂ C₂₂ enhanced the Bingham yield values (τ_β). The τ_β for crude oil without additives against 15, 27, and 39°C were 0.286, 0.131, and 0.075 Pa respectively, whereas the τβ for the treated crude oil with POMA₂ C₂₂ were 0.027, 0.022 and 0.010 Pa at 3000 ppm at the same temperatures. By using the photomicrography analysis, it was found that, the wax morphology was greatly modified to fine dispersed crystals of compact size.