Hydrothermal Synthesis and Structure of [Mn(C_8H_5NO_4)·H_2O]_n·2nH_2O

1 INTRODUCTION The self-assembly of organic-inorganic hybrid ma- terials is an intriguing area, which is yielding new generations of supramolecular architectures[1, 2]. Coor- dination by transition metals with multifunctional ligands is one of the main design principles. As a rigid multi-dentate ligand, 5-aminoisophthalic acid (AIP) has received considerable attention owing to the variety of bridging abilities[3~8]. It can engage in three types of intermolecular interactions: (1) M-L b…     

Zero Dissipative, Explicit Numerov-Type Methods for Second Order IVPs with Oscillating Solutions

New explicit, zero dissipative, hybrid Numerov type methods are presented in this paper. We derive these methods using an alternative which avoids the use of costly high accuracy interpolatory nodes. We only need the Taylor expansion at some internal points then. The method is of sixth algebraic order at a cost of seven stages per step while their phase lag order is fourteen. The zero dissipation condition is satisfied, so the methods possess an non empty interval of periodicity. Numerical results over some well known problems in physics and mechanics indicate the superiority of the new method.     

车前子中多糖含量的测定

采用蒽酮-硫酸法比色测定，用精制车前子多糖测得车前子多糖对葡萄糖的换算因子，对我国同属不同品种的车前子不同采集时间及炮制前后其多糖含量进行了比较研究。结果表明：此测定方法简便可行。供试液在8h内显色稳定，重现性较好，平均回收率为97．8％，RSD=1．41％(n=5)。江西吉安产大粒车前子生品多糖含量在9．15％～9．83％之间，炮制后其多糖含量在6．29％～6.81％之间；南昌新祺周车前GAP标准基地的大粒车前子生品多糖含量为7.85％～8．38％，炮制后其多糖含量为6．01％～6．64％；东北产的小粒车前子生品多糖含量为6．61％，炮制后其多糖含量为6．45％。     

Crystallization and morphology of poly(vinylidene fluoride)/poly(3‐hydroxybutyrate) blends. I. Spherulitic morphology and growth by polarized microscopy

The development of the poly(3‐hydroxybutyrate) (PHB) morphology in the presence of already existent poly(vinylidene fluoride) (PVDF) spherulites was studied by two‐stage solidification with two separate crystallization temperatures. PVDF formed irregular dendrites at lower temperatures and regular, banded spherulites at elevated temperatures. The transition temperature of the spherulitic morphology from dendrites to regular, banded spherulites increased with increasing PVDF content. A remarkable amount of PHB was included in the PVDF dendrites, whereas PHB was rejected into the remaining melt from the banded spherulites. When PVDF crystallized as banded spherulites, PHB could consequently crystallize only around them, if at all. In contrast, PHB crystallized with a common growth front, starting from a defined site in the interfibrillar regions of volume‐filling PVDF dendrites. It formed by itself dendritic spherulites that included a large number of PVDF spherulites. For blends with a PHB content of more than 80 wt %, for which the PVDF dendrites were not volume‐filling, PHB first formed regular spherulites. Their growth started from outside the PVDF dendrites but could later interpenetrate them, and this made their own morphology dendritic. These PHB spherulites melted stepwise because the lamellae inside the PVDF dendrites melted at a lower temperature than those from outside. This reflected the regularity of the two fractions of the lamellae because that of those inside the dendrites of PVDF was controlled by the intraspherulitic order of PVDF, whereas that from outside was only controlled by the temperature and the melt composition. The described morphologies developed without mutual nucleating efficiency of the components. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 873–882, 2003     

Cu(II)-catalyzed enantioselective aldol condensation between malonic acid hemithioesters and aldehydes

A mild, decarboxylative, aldol-type addition of malonic acid hemithioesters to aldehydes has been shown to occur with up to 39% enantioselectivity when the reaction was carried out in the presence of catalytic amounts of a Cu(II) salt, an enantiopure, tartaric acid-derived bis-benzimidazole and an achiral base.     

Polyaniline/12-phosphotungstic acid/V<Subscript>2</Subscript>O<Subscript>5</Subscript> nanocomposite and its platinum analog as oxygen reduction electrocatalysts

A guest-host nanocomposite based on electroconducting polyaniline doped with 12-phosphotungstic acid and V₂O₅ as well as its bifunctional analog containing not more than 5 mass% nanosized platinum were obtained. A study was carried out on the structure of these nanocomposites, their redox characteristics, and electrocatalytic activity in the reduction of oxygen. These nanocomposites were found to display catalytic properties in the electrochemical reduction of oxygen, while the presence of even a slight amount of nanosized platinum in the bifunctional composite leads to a significant increase in its electrocatalytic activity. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 5, pp. 307–314, September–October, 2007.     

Synthesis and properties of the nanocomposite of zink oxide and poly(amic acid)

The composite comprised of zinc oxide quantum dots and poly(amic acid) (PAAc) was prepared and studied by X-rays diffraction, X-ray photoelectron spectroscopy, light scattering, UV absorbance and UV fluorescence. The UV absorbance of the ZnO/PAAc composite was found to be much larger than that of its components taken separately. The fluorescence of the ZnO/PAAc composite was found to be shifted to longer wavelengthes in comparison with pure ZnO. The presence of the dopant dodecylbenzenesulfonic acid was found to affect the observed fluorescence.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Fiber-Optic Chemical Sensor for Detection of NO2 Using Poly (3-Octylthiophene)

A fiber-optic chemical sensor (FOCS) for detection of nitrogen dioxide (NO₂) molecules is reported. The FOCS presents an optropode structure because of the transmission properties of the sensitive material. The NO₂ FOCS is activated by using the semiconductor polymer: regioregular head-to-tail poly(3-octylthiophene-2,5-diyl). The operation wavelength of the sensor is 543.5 nm such that a simple LED and detector can be used for the design of this device. The sensor response decreases after each exposure, demonstrating the reduction in sensitivity as well as irreversibility lower than 5%. However, its properties such as rapid response, high selectivity, high sensitivity (0.43 ± 0.01 muW/ppm), hygroscopic properties, and its operation at room temperature make this kind of FOCS a good alternative for NO₂ toxic gas detection.