几周期余弦-高斯激光脉冲的时间重心

研究了几周期超短余弦-高斯脉冲的时间重心与绝对相位以及与余弦函数参量之间的关系．给出了几周期超短余弦-高斯脉冲时间重心的解析表达式和模拟图形．结果表明，余弦-高斯脉冲的时间重心随着绝对相位的变化而发生漂移，并且脉冲宽度对余弦-高斯脉冲时间重心的漂移量也有一定的影响．余弦函数的参量在一定取值范围内对余弦-高斯脉冲也有较大的影响，它可能导致几周期余弦-高斯脉冲的时间重心有较大的漂移．     

单偏振控制器环形腔光纤激光器实验研究

理论分析了非线性偏振旋转环形腔作为类饱和可吸收体获得脉冲的物理机理。在光纤环形腔结构中,采用单个偏振控制器实现了非线性偏振旋转锁模,直接获得了脉冲宽度为131 fs的超短脉冲输出。实验中,采用性能稳定的976 nm半导体二极管激光器作为抽运源,使用高掺杂浓度的Er3 光纤为增益介质,通过调节偏振控制器,获得了光谱谱宽(3 dB带宽处)为23.5 nm的稳定锁模脉冲输出。脉冲中心波长为1535.9 nm,平均功率为5.91 mW,脉冲重复率为11.20 MHz。     

5 TW/40 fs级台式钛宝石激光系统研究

在TSA-25系统输出35 mJ,800 nm啁啾脉冲的基础上,建立了以钛宝石作为增益介质的二级啁啾脉冲放大(CPA)系统。使用0.6 J和1.6 J,532 nm,10 Hz Nd∶YAG激光抽运,输出脉冲能量达到500 mJ,经压缩脉冲宽度为41 fs,压缩器的能量转换效率为63%,峰值功率可达7.6 TW。通过对放大器系统的钛宝石晶体、抽运密度以及多通结构通道数的选择等实验,有效地提高了能量放大器的萃取效率。其主放大器能量萃取效率达到32%,整个系统占用尺寸不到10 m2。     

一种新型温度自补偿高灵敏度折射率计

基于高频CO2激光脉冲写入的新型超长周期光纤光栅(ULPFG),提出了一种可实现温度自补偿的新型高灵敏度折射率计。理论与实验表明,新型超长周期光纤光栅不同闪耀阶次谐振峰对外界折射率与温度变化的灵敏度各自不同,特别的是,该光栅存在对外界折变不敏感的谐振峰,测量中除了可以利用该峰实现温度同时测量外,还可以补偿另一个测量折变的谐振峰因温度变化带来的测量误差。该折射率计具有制作简单、成本低、强度好,灵敏度高等优点,当外界折射率在1.43~1.45范围内变化时,其折射率测量灵敏度可达每单位折射率240 nm,在实际工业应用中具有较大的潜在实用价值。     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

脉冲功率晶闸管反向恢复特性

为建立有效的晶闸管模型来仿真晶闸管关断时过电压,减小晶闸管过压损坏的概率,以最大通流150 kA、耐压5.2 kV的脉冲晶闸管为研究对象,将其前置于脉冲形成单元回路中作为大功率开关使用,记录放电过程中晶闸管两端电压及电流。实验数据表明：恢复过程中的电流下降率、反向恢复电荷、反向恢复电流峰值随通态电流峰值的增大而增大,晶闸管关断时间随通态电流峰值的增大而减小。此外,在关断过程中,当电流下降率在-50~1000 A/s时,电流下降率与电流峰值为线性关系。因此,在大脉冲电流条件下,推导反向恢复过程参数与通态电流参数的关系时电流下降率可用与电流峰值的线性关系代替。基于Matlab仿真平台,建立了具有反向恢复过程的脉冲晶闸管模型。该模型仿真得到的晶闸管反向恢复电流峰值与实测结果较为吻合,反向恢复电压尚待进一步修正。     

Asymmetric molecular harmonic assisted generation of the attosecond X-ray pulse

In this paper, we theoretically investigate the asymmetric molecular high-order harmonic emission and the attosecond X-ray pulse generation when the asymmetric molecular HeH²⁺ ion is exposed to an intense chirped pulse. It is found that the molecular harmonics are strongly dependent on the internuclear distance R as well as the chirp parameter, showing a smooth and intense harmonic plateau at R = 8.0 a.u. and β = 0.4. Further, by adding a subharmonic controlling pulse with the optimised conditions, a supercontinuum with a bandwidth of 602 eV can be obtained. Finally, by properly superposing the selected harmonics in the supercontinuum region, a series of isolated X-ray pulses with durations of sub-80 as are directly generated.     

Selective creation of maximum coherence in multi-level Λ system

We consider the creation of the maximum Raman coherence in the six-level Λ system using optimal control theory. Optimal fields are designed for different initial conditions, resonant, and off-resonant, using the Krotov method including a reference field into the cost functional. Suppression of the population transfer to the intermediate level is achieved via an additional functional constraint which depends on the system dynamics. We demonstrate that the spectrum of the optimised fields has major contribution from the corresponding resonant frequencies independently of the choice of carrier frequency of the initial guess field. We also indicate that the pulse train emerges as a solution of the control problem of coherence optimisation in multi-level quantum systems.     

Design and simulation of a C-band SLED with mode converter

The transient response analysis of the SLED based on the equivalent circuit is described. Then, a C-band SLED using TE0,1,15 mode cylindrical cavity with TE10-TE01 mode converter has been designed. According to the main RF parameters of the accelerator, the coupling coefficient is optimized to obtain the maximum multiplication factor. The key components of the pulse compressor include a 3 dB directional coupler, a TE10-TE01 mode converter,and a cylindrical cavity, which are simulated and optimized using 3D electromagnetic field simulation software. In addition, the function defining the relation between the coupling factor and aperture size is derived by a mathematical fitting method.