EPR studies on H-abstraction from methylbenzenes by “magic blue” reagent

After mixing a methylbenzene 4 with “magic blue” solution in F113 (CClF₂CCl₂F) containing bis{perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl}nitroxide 2 and perfluoro-1-nitroso-1-[1-(2-fluorosulfonyl)ethoxy]ethane 3 at room temperature, benzylic H-atom of 4 could be selectively abstracted by 2, and benzyl radical 5 thus generated was immediately trapped by 3. Based on hyper-fine splitting constants (hfsc), the structure of the spin adducts perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl benzyl nitroxides 6 derived from seven methylbenzenes have been identified. The mechanism of the H-abstraction/spin trapping process is also discussed.     

Hydrolytically stable, diaminocarboxylic acid-based membranes buffering in the pH range from 6 to 8.5 for isoelectric trapping separations

Diaminocarboxylic acid carrier ampholytes, such as L-histidine, 2,3-diaminopropionic acid, L-ornithine, and L-lysine, were reacted with glycerol-1,3-diglycidyl ether (GDGE) and poly(vinyl alcohol) (PVA) in the presence of sodium hydroxide to produce hydrolytically and mechanically stable hydrogels, supported on a PVA substrate, for use as buffering membranes in isoelectric trapping (IET) separations. The pH values of the DACAPVA membranes were determined with the help of small-molecule pI markers and proteins and were found to be in the 6 < pH < 8.5 range. The membranes were successfully used to isoelectrically trap small ampholytes, desalt ampholyte solutions in IET mode, and effect the binary separation of chicken egg white proteins.     

General Method to Increase Carboxylic Acid Content on Nanodiamonds

Carboxylic acid is a commonly utilized functional group for covalent surface conjugation of carbon nanoparticles that is typically generated by acid oxidation. However, acid oxidation generates additional oxygen containing groups, including epoxides, ketones, aldehydes, lactones, and alcohols. We present a method to specifically enrich the carboxylic acid content on fluorescent nanodiamond (FND) surfaces. Lithium aluminum hydride is used to reduce oxygen containing surface groups to alcohols. The alcohols are then converted to carboxylic acids through a rhodium (II) acetate catalyzed carbene insertion reaction with tert–butyl diazoacetate and subsequent ester cleavage with trifluoroacetic acid. This carboxylic acid enrichment process significantly enhanced nanodiamond homogeneity and improved the efficiency of functionalizing the FND surface. Biotin functionalized fluorescent nanodiamonds were demonstrated to be robust and stable single-molecule fluorescence and optical trapping probes.     

Enhanced particle trapping performance of induced charge electroosmosis

By increasing the number of floating electrodes or enlarging the width of single floating electrode, this work provides effective ways to strongly improve the particle trapping performance of induced charge electroosmosis (ICEO). Particle trapping with double or triple separate narrow floating electrodes increases the effective actuating range of ICEO flow and therefore enhance the optimum trapping ability to be 1.63 or 2.34 times of that with single narrow electrode (width of ), and the ideal trapping frequency is independent of the electrode number due to the mutual independence of electrochemical ion relaxation over each electrode. Furthermore, using a single wide floating electrode with the effective width equal to three separate narrow floating electrodes () instead of a single narrow one slightly lowers the ideal trapping frequency due to an increase in the characteristic polarization length, but the trapping performance is only up to 1.59 times of that with original single narrow electrode, implying that vertical channel confinement effect may severely suppresses the effective actuating range of ICEO flow and renders the trapping performance not as expected. Trapping experiments over wide floating electrode with different channel height were carried out, showing that the trapping performance increases by correctly increasing the channel height.     

CaS：Ce，Sm的制备及性能表征

采用碳还原法制备了CaS：Ce，Sm样品，并研究了反应机理、还原原理以及灼烧温度对CaS晶格形成和光激励发光的影响。样品的XRD测试表明，采用碳还原法制备的CaS：Ce，Sm样品，具有纯CaS的面心立方结构，晶格常数a=0.569 4 nm，样品的激发光谱是峰值分别位于295 nm和461 nm的宽带谱，样品的荧光光谱是峰值位于503 nm、560 nm、600 nm和655 nm带谱，光激励发光光谱是峰值分别位于500 nm，565 nm和605 nm的宽带谱，光激励激发光谱是峰值位于1 150 nm的宽带谱。     

Capillary gas chromatography of lower aliphatic C2?C5 aldehydes in the free form as a group of pungent odorants in air

The capillary gas chromatography of the C₂-C₅ lower aliphatic aldehydes (e.g.,acetaldehyde, propionaldehyde, n- and i-butyraldehydes, n- and i-valeraldehydes) which, in the free form in air, have unpleasant odors and low threshold odor values, has been studied using cold-trap preconcentration with liquid oxygen. The capillary column outlet was connected to enable simultaneous detection by FID, ECD, FPD AND FTD (SID).     

氧化锌分散体光反应产生的自由基中间体

溶液中光诱导的电子转移反应已进行了大量的研究。而半导体粉末在水相或非水溶剂中的光化学研究也与自俱增^[1-3]。这种光化学与成像体系、太阳能转换以及光催化或污物的光降解有关。因此,越来越引起人们的重视。     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

Photophysics of carbazole-containing systems. 1. Dilute solution behavior of poly(N-vinyl carbazole) and N-vinyl carbazole/methyl acrylate copolymers

Steady-state and time-resolved fluorescence techniques have been used to study the photophysical behaviors of poly(N-vinyl carbazole), PNVCz and a series of N-vinyl carbazole-methyl acrylate (NVCz-co-MA) copolymers in dilute solution as a function of both NVCz composition and temperature. A kinetic scheme, intended to describe intramolecular excimer formation across the entire NVCz composition range, is proposed. In low aromatic content copolymers, two monomer species (unquenched and quenched monomer) and two excimer species (the sandwich-like excimer and a higher energy excimer) exist. The contribution from monomer emission to the overall fluorescence decreases with increasing NVCz content through increased excimer formation: this is likely to be consequent upon (1) an increase in the number of excimer forming sites, and (2) increasing efficiency of energy transfer from the excited monomers to the excimer forming sites. In the homopolymer, PNVCz, the only emission that can be observed on a nanosecond timescale is excimeric. This fluorescence appears to originate from three excimer species (the sandwich-like excimer, and two higher energy forms). For the homopolymer, the current observations are consistent with the model proposed by Vandendriessche and De Schryver [Polym. Photochem. 7 , 153 (1986)]. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 963–978, 1997     

Nanoparticle enabled thermal control of ions in liquid crystals

Typically, ionic species in thermotropic liquid crystals are nearly fully ionised. Therefore, the concentration of mobile ions practically does not depend on the temperature. Interestingly, the same liquid crystals doped with nanoparticles exhibit totally different behaviour. The concentration of mobile ions become temperature dependent. This paper reports the effects of the temperature on the concentration of ions in liquid crystal nanocolloids. Liquid crystals doped with both 100% pure and contaminated nanoparticles are considered. Regardless the ionic purity of nanodopants, the concentration of mobile ions in liquid crystal nanocolloids increases towards the saturation as their temperature goes up. The magnitude of this saturation level equals the initial concentration of ions in liquid crystals doped with 100% pure nanoparticles. The temperature induced release of ions by contaminated nanoparticles in liquid crystals increases the above-mentioned saturation level. While the dispersion of 100% pure nanoparticles in liquid crystals leads to the temperature-dependent purification only, the use of contaminated nanoparticles results in the temperature-driven switching between the purification and contamination regimes enabling thermal control of ions.