Method of immobilization of carboxymethyl-dextran affects resistance to tissue and cell colonization

Coatings from carboxymethylated dextrans (CMDs) were fabricated, analyzed by XPS, and investigated for their ability to inhibit corneal epithelial tissue outgrowth and bovine corneal epithelial cell attachment and growth. CMDs with differing degrees of carboxymethyl substitution and various molecular weights were synthesized by the solution reaction of dextrans with bromoacetic acid under different reactant ratios. The CMD compounds thus obtained were attached onto aminated surfaces produced in two ways: by the plasma deposition of a coating from n-heptylamine vapour, and by the plasma deposition of an acetaldehyde coating onto whose surface aldehyde groups the polyamine compounds polylysine, polyethyleneimine and polyallylamine were immobilized to provide platforms for CMD immobilization. XPS spectra showed that the latter route produced thicker coatings than the former approach. CMD molecules attached directly onto the plasma-fabricated amine surface supported some tissue migration; the extent of carboxymethyl substitution and the molecular weight of the CMDs had little influence. For CMDs immobilized via polyamine spacers, on the other hand, tissue outgrowth was completely inhibited, and again there were no discernible effects from the extent of carboxymethyl substitution and the molecular weight of the CMDs. In assays involving cell attachment and growth, analogous observations were found. Thus, the mode of immobilization of these polysaccharide coatings is the dominant factor in their anti-fouling performance, suggesting that optimization of the architecture of polysaccharide coatings may be an important factor for maximizing their cell-repellent abilities.     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.     

在改性非水合成的丝光沸石上邻二甲苯异构化

1985年Bibby首次在非水体系中合成了纯硅方钠石,由此开创了一条合成分子筛的新途径。徐文旸等首次在Na_2O-SiO_2-Al_2O_3一有机胺非水体系中合成了丝光沸石(简称非水丝光沸石,用NAM表示)。晶化过程中液相无硅铝酸根离子,固相硅铝比始终保持不变,是典型的固相转化过程。利用非水体系这一特点,可以定向地合成出催化反应所需硅铝比的沸石。与水热体系相比,非水体系合成的丝光沸石在邻二甲苯异构化催化性能上要优于前者。     

Concerning the Thermal Diastereomerization of the Green Fluorescent Protein Chromophore

Summary. Two model compounds for the green fluorescent protein chromophore were prepared. One of them incorporates the natural 4-hydroxybenzylidene group of the natural tyrosin derived chromophore, the other one bears a methyl group instead of the hydroxy group. Whereas the photochemically prepared (E)-diastereomer of the first compound very effectively reverted thermally (room temperature) to the thermodynamically stable (Z)-diastereomer, the (E)-diastereomer of the second derivative proved to be stable even at elevated temperatures for more than a day. This finding can be rationalized by constructing the appropriate resonance structures showing that only in the first case an effective delocalization enables partial single bond character of the benzylidene double bond. From the standpoint of chemical etiology, only Nature’s choice of the tyrosin derived chromophore of the green fluorescent protein provides an efficient radiationless thermal relaxation channel for the unwanted photo-diastereomerization product formed after excitation besides the dominating fluorescence channel of its chromophore.     

Molecular potential-energy surfaces for chemical reaction dynamics

This paper reviews the construction of molecular potential-energy surfaces by an interpolation method which has been developed over the last several years. The method uses ab initio quantum chemistry calculations of the molecular electronic energy in an automated procedure to construct global potential- energy surfaces which can be used to simulate chemical reactions with either classical or quantum dynamics. The methodology is explained and several applications are presented to illustrate the approach. Received: 22 February 2002 / Accepted: 2 May 2002 / Published online: 6 November 2002 Correspondence to: M. A. Collins e-mail: collins@rsc.anu.edu.au Acknowledgements. The methods described in this overview are the result of collaborations with former members of my group, in particular with Josef Ischtwan, Meredith Jordon, Keiran Thompson and Ryan Bettens. I am also indebted for inspiration gained from many discussions with my colleagues Leo Radom and Donghui Zhang (National University of Singapore). This work has been supported by the Supercomputer Facility of the Australian National University and the Australian Partnership for Advanced Computing.     

A thorough study of the surface wax of apple fruits

The composition of the surface waxes of three apple ( Malus domestica L.) cultivars ("Florina", "Golden B" and "Ozark Gold") has been studied by means of spectroscopic and GC–MS analysis of the class-fractionated mixture of components. Odd n -alkanes, mainly C₂₇ and C₂₉ molecules, are prevalent in the saturated fraction. Small concentrations of alkenes were also found; the C_28:1 component is strongly (72%) in excess over the other 1-alkenes. Straight-chain esters (mainly of palmitic acid) of saturated primary alcohols (C₁₈–C₃₀) were also detected; whereas the acyl moiety is made up essentially of an even number of carbons, the alcohol counterpart does not exhibit this characteristic. Aldehydes are present (C₂₀–C₃₀) with the homologue patterns C₂₆–C₃₀ most strongly represented. Straight-chain free secondary alcohols characterize the waxes of "Florina" and "Ozark Gold"; the hydroxy function is located far from the extremity of the carbon framework. Outstanding is the presence of three alcohols with 29 carbon centres. These alcohols are accompanied by free straight-chain primary alcohols, mainly with even-numbered carbon chains in the range C₂₆–C₃₀. Free fatty acids are present; all of have a framework of even-numbered carbon chains mainly in the range C₁₆–C₂₀. C_18:1 (oleic acid) is well represented.     

2D metal slabs in new nickel-tin chalcogenides Ni7−δSnQ2 (QSe, Te): average crystal and electronic structures, chemical bonding and physical properties

A systematic search for mixed low-valence, nickel-tin chalcogenides performed by establishing phase relations in the parts of Ni-Sn-Se and Ni-Sn-Te ternary systems resulted in the discovery of two new compounds, Ni_5.62SnSe₂ and Ni_5.78SnTe₂. Single crystals of both compounds were prepared by chemical transport with iodine and crystal structures were determined by single crystal X-ray investigation. The ED patterns for Ni_5.78SnTe₂ showed the presence of satellite reflections, which indicate a modulated structure with q≈0.4a^*. Average crystal structures of both compounds were determined to be of tetragonal symmetry (Sp.gr. I4/mmm, Z=2) with a=3.6890(8) Å, c=18.648(3) Å, R_w=0.0716 and a=3.7680(5) Å, c=19.419(4) Å, R_w=0.0832, correspondingly, and are isostructural to known Ni_5.72SbSe₂ and Ni_5.66SbTe₂. Measurements were carried out for both compounds with respect to thermal, electrical and magnetic properties. Ab initio band structure calculations were also performed to take a first glance into the electronic structure of such type compounds. The anisotropy of their band structure was found. Physical property measurements showed both compounds to be the anisotropic metallic conductors and paramagnetics. Calculated difference charge density maps revealed pairwise covalent and multicenter metallic nature of the d-metal—chalcogen and d-metal—p-metal interactions, respectively.     

Applicability of glass fiber as a support material for generation of gaseous standard mixtures using thermal decomposition of the surface compound. Calibration of analytical equipment

The use of glass fiber as a support material for a surface compound serving to generate gaseous standard mixtures of ethene is described. The technique is based on the process of thermal decomposition of the surface compound in a desorber connected on‐line via a multi‐port valve to the calibrated device. The surface compound undergoes thermal decomposition at 245°C, yielding known amounts of ethene. The method enables on‐line preparation of a standard mixture immediately before the calibration step. Consequently, it can be also applied for the generation of standard mixtures containing volatile, malodorous, unstable, and toxic compounds.     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).