Terahertz planar antennas for future wireless communication: A technical review

With the monotonic increasing demand of the higher bandwidth for the next generation wireless communication system, the extension of the operating frequency of the communication system to the millimeter/Terahertz wave regime of the electromagnetic spectrum where several low-attenuation windows exist is inevitable. However, before the commercial implementation of the wireless communication in these low-attenuation windows, there are various obstacles which need to be addressed by the scientists and researchers. The atmospheric path loss is the main obstacle to the full-fledged implementation of the terahertz wireless communication. The remedy to this problem is the use of high-power sources, efficient detectors and high gain antenna systems. This paper reviews these technical issues with the special attention to the planar antennas which might contribute to the compact, inexpensive, and low profile future terahertz wireless communication system design.     

A CSP and tabulation-based adaptive chemistry model

We demonstrate the feasibility of a new strategy for the construction of an adaptive chemistry model that is based on an explicit integrator stabilized by an approximation of the Computational Singular Perturbation (CSP)-slow-manifold projector. We examine the effectiveness and accuracy of this technique first using a model problem with variable stiffness. We assess the effect of using an approximation of the CSP-slow-manifold by either reusing the CSP vectors calculated in previous steps or from a pre-built tabulation. We find that while accuracy is preserved, the associated CPU cost was reduced substantially by this method. We used two ignition simulations – hydrogen–air and heptane–air mixtures – to demonstrate the feasibility of using the new method to handle realistic kinetic mechanisms. We test the effect of utilizing an approximation of the CSP-slow-manifold and find that its use preserves the order of the explicit integrator, produces no degradation in accuracy, and results in a scheme that is competitive with traditional implicit integration. Further analysis on the performance data demonstrates that the tabulation of the CSP-slow-manifold provides an increasing level of efficiency as the size of the mechanism increases. From the software engineering perspective, all the machinery developed is Common Component Architecture compliant, giving the software a distinct advantage in the ease of maintainability and flexibility in its utilization. Extension of this algorithm is underway to implement an automated tabulation of the CSP-slow-manifold for a detailed chemical kinetic system either off-line, or on-line with a reactive flow simulation code.     

A picosecond widely tunable deep-ultraviolet laser for angle-resolved photoemission spectroscopy

We develop a picosecond widely tunable laser in a deep-ultraviolet region from 175 nm to 210 nm,generated by two stages of frequency doubling of a 80-MHz mode-locked picosecond Ti:sapphire laser.A β-BaB2O4 walk-off compensation configuration and a KBe2BO3F2 prism-coupled device are adopted for the generation of second harmonic and fourth harmonics,respectively.The highest power is 3.72 mW at 193 nm,and the fluctuation at 2.85 mW in 130 min is less than ±2%.     

The effects of Zn vacancies on ferromagnetism in Cu-doped ZnO films controlled by oxygen pressure and Li doping

Zn0.99Cu0.01O films were studied experimentally and theoretically.The films were prepared by pulsed-laser deposi tion on Pt(111)/Ti/SiO2/Si substrates under various oxygen pressures to investigate the growth-dependence of the ferromag netic properties.The structural,magnetic,and optical properties were studied,and it was found that all the samples possess a typical wurtzite structure,and that the films exhibit room-temperature ferromagnetism.The sample deposited at 600℃and an oxygen pressure of 10 Pa showed a large saturation magnetization of 0.83μB/Cu.The enhanced ferromagnetism in the(Cu,Li)-codoped ZnO is attributable to the existence of Zn vacancies(VZn),as shown by first-principles calcu lations.The photoluminescence analysis demonstrated the existence of V Zn in both Zn0.99Cu0.01O and(Cu,Li)-codoped ZnO thin films,and this plays an important role in the increase of ferromagnetism,according to the results of first-principles calculations.     

晶体级联方式的宽带三倍频方案分析

 讨论了入射基频光频谱宽度、两块和频晶体失谐角对KDP晶体Ⅰ/Ⅱ/Ⅱ类角度失谐级联方式的三倍频光功率谱分布的影响,分析了影响三倍频效率的因素。研究结果表明,第二块和频晶体得到的三倍频光的功率谱分布与基频光功率谱分布及失谐角有关,三倍频光频谱宽度近似为基频光的3倍,采用该方案的三倍频可有效抑制由于基频光时间相位调制导致的三倍频光强随时间分布的不均匀,并能有效提高大带宽条件下的三倍频转换效率。同时,采用该方案的三倍频,对级联的两块和频晶体厚度及失谐角调整精度要求不高,在实验上有很大的可操作性。     

基于随机并行梯度下降算法的多波长激光相干合成

由于受到受激布里渊散射(SBS)等非线性效应的限制,单频激光放大器的功率在百瓦量级,以非单频激光多波长激光作为种子源能够有效地抑制SBS并提高放大器功率.与单频激光相干合成相比,非单频率、多波长激光的相干合成有望将输出激光功率成量级地提高.基于随机并行梯度下降(stochastic parallel gradient descent,SPGD)算法,实现了四波长激光的相干合成.在系统闭环时,四路多波长激光合成后的主瓣能量能够提高3倍,达到理想值的75%.验证了多波长、非单频激光相干合成的可行性,为高功率相干合成的发展提供了新的途径.     

基于室温脉冲量子级联激光器的NO气体检测中的光谱处理方法研究

报导了采用基于室温脉冲量子级联激光器的脉内光谱检测技术,利用中心波长为1904 cm^-1的量子级联激光器,在实验室对NO气体样品进行检测的研究结果. 针对单线直接吸收光谱反演算法进行了研究,介绍了基线拟合的最小二乘算法以获取其吸光度,根据HITRAN数据库中相应吸收谱线的吸收线强,采用扫描积分实现了气体浓度的反演,避免了标气标定造成的误差及污染;通过拟合残差分析得到了系统的检测限,达到34×10^-6 m. 关键词： 量子级联激光器 中红外 多项式拟合 扫描积分     

相对论效应对激光在等离子体中的共振吸收的影响

采用一维粒子模拟(PIC)方法，研究了相对论效应对P偏振激光斜入射非均匀等离子体时产生的共振吸收的影响. 计算表明，弱相对论情况下，在临界面附近产生的电子等离子体波的相对论非线性效应占主要作用；随着入射光场的逐渐增大，吸收率逐渐降低. 当入射光强超过3.7×10¹⁷W/cm²时，由于超短激光脉冲本身在等离子体中产生相对论效应、等离子体波破裂效应，以及参量不稳定过程激发等，吸收系数随着激光强度又开始增加. 固定等离子体密度标长，取不同的激光入射角、电子初始温度，相对论效应对吸收系数的影响是一致的. 关键词： 激光等离子体 相对论效应 共振吸收 粒子模拟     

宽频带光束非线性热像效应的实验研究

实验研究宽频带脉冲光束通过非线性介质时的非线性热像的形成过程,揭示了光束入射功率和脉冲宽度、介质厚度等因素对热像光强和位置的影响. 结果表明,与单纵模激光束一样,在宽频带脉冲光束情形下,非线性介质上游元件的模糊斑调制也可导致在下游共轭位置形成热像. 热像光强随入射光束功率的增加而增加;若脉冲能量一定,则热像光强随脉冲宽度的增加而减弱;若脉冲峰值功率一定,则热像光强随脉冲宽度的增加而增强. 关键词： 高功率激光 热像 宽带光束 小尺度自聚焦     

三能级Upper-ladder型系统中的

三能级Upper-ladder型系统中,在旋波、慢变振幅近似下,求解了考虑驱动场相位扩散后的系统密度矩阵运动方程,并给出了这个三能级梯型系统稳态线性解析解.利用对密度矩阵运动方程的稳态线性解析解的数值模拟结果,研究相位扩散对无反转激光增益、色散和粒子数差的影响;利用对密度矩阵运动方程的数值模拟结果,分析相位的扩散对无反...