Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Planned positron experiments at FRM-II

The new research reactor FRM-II near Munich has a strong positron source, which delivers an intense, nearly monoenergetic positron beam. Our positron systems, the pulsed low energy positron source (PLEPS) and the scanning positron microscope (SPM) will be operated at this beam. Some aspects of matching these systems to the new positron source will be discussed.Considerable improvements are expected, e.g. more than 10⁵ s⁻¹ recorded events at PLEPS and sub-micrometre resolution at SPM. They will enable investigations in so far inaccessible problems like the evaluation of annihilation characteristics and trapping constants of individual defects or studies of fast dynamical processes. In applied materials science complex defect structures will be studied which demand a resolution into many differing lifetimes, e.g. fractured specimens, wear, corrosion, etc. Also large series of measurements at small systematic modifications are planned. There is also the opportunity to analyse in addition the chemical microstructure of the specimens by means of a hydrogen microprobe and other ion beam techniques available close to FRM-II at the Technical University of Munich.     

对称双吡咯甲烷的合成与分子内氢键的研究

５－甲基吡咯－２－羧酸酯在磺酰氢，溴或四乙酸铅作用下，生成相应的在５－甲基上含取代基的产物，后者不经分离不便可自缩合得标题化合物，核磁共振氢谱研究和分子构象木匠，当３，３位的取代基为甲酸（酯）基或乙酸（酯）基时，可形成３，３位酯基与另一吡咯环上的氮氢之间的分子内氢键，而３，３位是其它取代基，如乙酰基，丙酸（酯）基，丁酸（酯）基时不能形成类似的分子内氢键。     

基团共轭效应研究Ⅱ：^13C核磁共振的化学位移与取代基的共轭效应强度

引言在定量和定性研究有机化合物的结构与性质的关系中,最广泛使用的是Hammett等所提出的σ_m、σ_p等取代基常数以及基团的诱导(场)效应和共轭效应常数。在建立基团的共轭效应常数方面,人们做了大量的工作,但多数工作是基于对基团的Hammett常数σ的人为分解上,建立的模型和分解方式(系数因子)不同,则得到不同的结果。另一方面纯理论计算工作大多引入较多参数,使计算复杂和使用不便。作者曾在建立表征诱导效应大小的     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。     

铜铝合金中γ_2相沉淀的分析电镜研究

Cu-12.7(wt)%Al合金从900℃高温淬至365℃～500℃温度范围等温不同时间(30秒至15分钟)的试样中形成了大量树枝状的γ_2相沉淀粒子。应用配有X线能谱仪(XEDS)和电子能量损失谱仪(EELS)的分析电子显微镜(JEOL JEM-2000FX型)对上还试样研究,结果表明:这些γ_2相粒子具有富铝的“核心”,长大到粒子线度大于约800nm后以不稳定方式生长成“花朵”状。生长过程中伴随着溶质元素Al由基体向γ_2相内的富集。而且在γ_2相粒子内部呈现出Spinodal分解组织的形貌特征,表明γ_2粒子内形成了化学成分调幅。EELS分析表明试样含氧。     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.