Chemical separation and inductively coupled plasma–atomic emission spectrometric determination of seventeen trace metals in thorium oxide matrix using a novel extractant – Cyanex-923

Comprehensive studies have been carried out on the extraction behaviour of thorium matrix vis-a-vis 17 trace metallic elements using a novel extractant viz. Cyanex-923. The near total extraction of thorium and quantitative separation of these metals has been established using inductively coupled argon plasma–atomic emission spectrometry (ICP–AES). The recovery of few representative elements has been confirmed by radio-active tracer studies. The studies carried out here have enabled determination of μg/l amounts of all analyte elements with a precision of better than 1% RSD with prior chemical separation from as low as 1 g thorium sample in just five chemical extractions.     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…     

铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Bifurcations and transition states

Bifurcations of reaction channels are related to valley-ridge inflection points and it is examined what happens when these do not coincide with transition states. Under such conditions there result bifurcating regions. There exist a number of different prototypes for such regions which are discussed explicitly on the basis of the pertinent Taylor expansions. When bifurcations occur close enough to transition states then there result bifurcating transition regions. An example for a bifurcating transition region is exhibited which is obtained from a quantum mechanical ab initio calculation for the ring opening of cyclopropylidene to aliene. In general there exist no orthogonal trajectory patterns which could serve as simplified models for channel bifurcations.Operated for the U.S. Department of Energy by Iowa State University under Contract No. W-7405-ENG-82. This work was supported by the Office of Basic Energy Sciences     

Rearrangement during cyclisation of some 3-(2-pyrrolyl) propionic acids and related compounds

Cyclisation of the title compounds leads to mixtures of the expected 4H-cyclopental[b]pyrrol-4-ones (1), the corresponding 6-ones (3) by a single rearrangement, and the cyclopenta[c]pyrrol-4-ones (4) by a double rearrangement, the proportions depending upon the substituents.The ¹H NMR spectra of 2-methyl-4H-cyctopenta[b]thiophen-6-one (3f) shows 6J long range $\text{CH}{}_3\text{CH}{}_2$ coupling, but this is absent in the corresponding pyrroles (3c,d). The ¹³C spectra of 1 and 3 cannot be interpreted on the basis of substituent chemical shifts in pyrroles and thiophens, and are clearly -CH = CH-X (X = NMe, NPh, S) bridged derivatives of cyclopent-2-enone.     

Classification of oxide glasses: A polarizability approach

A classification of binary oxide glasses has been proposed taking into account the values obtained on their refractive index-based oxide ion polarizability α_O2−(n₀), optical basicity Λ(n₀), metallization criterion M(n₀), interaction parameter A(n₀), and ion's effective charges as well as O1s and metal binding energies determined by XPS. Four groups of oxide glasses have been established: glasses formed by two glass-forming acidic oxides; glasses formed by glass-forming acidic oxide and modifier's basic oxide; glasses formed by glass-forming acidic and conditional glass-forming basic oxide; glasses formed by two basic oxides. The role of electronic ion polarizability in chemical bonding of oxide glasses has been also estimated. Good agreement has been found with the previous results concerning classification of simple oxides. The results obtained probably provide good basis for prediction of type of bonding in oxide glasses on the basis of refractive index as well as for prediction of new nonlinear optical materials.     

Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

核心素养为本的单元教学设计与实施——以“探究水的组成”为例

以“探究水的组成”教学为例，通过课标、教材及学习者分析，从认识角度、探究水平、认识水平等3个维度整体规划“身边的化学物质”主题单元目标学习进阶，明确“探究水的组成”课时目标，通过温故建模、据模探究、探究推理等3个阶段的教学实施，建立具体物质的研究思路模型，运用模型研究陌生物质（氢气），初步形成定量研究物质组成的能力。     

Importance of REP values when comparing the CALUX bioassay results with chemoanalyses results Example with spiked vegetable oils

Differences between chemical activated luciferase gene expression (CALUX) bioassay and chemoanalyses results are observed.This paper shows that calculations of the TEQ values using REP values instead of WHO TEF values give different results. The REP values do affect the results obtained by the CALUX technique. These differences are more marked for the dioxin like PCB compounds (CALUX TEQ values are lower than WHO TEQ values) than for the dioxin compounds (CALUX TEQ values are higher than WHO TEQ values).The CALUX results were compared with the concentrations of the congeners’ spiked into the oil.