Darstellung und Strukturen einiger N-(Tri-t-butoxysilyl)anilin-Derivate

Formation and Structures of N-(tri-t-butoxysilyl)aniline Compounds Para-substituted N-(tri-t-butoxysilyl)anilines (t-BuO)₃SiNRC₄H₄X-p, R = H, CH₃, with substituents of high electron affinity (X = CN, NO₂) were prepared by a one-pot reaction of tri-t-butoxychlorsilane, potassium t-butanolate and substituted anilines. Corresponding compounds with substituents of low electron affinity (X = OMe, H) preferably were prepared by metalation of anilines with sodium amide. Four crystal structures were determined. N-(tri-t-butoxysilyl)-p-nitro-aniline, N-methyl-(N-tri-t-butoxysilyl)-p-nitroaniline and N-(tri-t-butoxysilyl)-p-cyanoaniline crystallize at 298 K monoclinically, N-(tri-t-butoxysilyl)aniline crystallizes orthorhombically.     

合成气在Rh（111）上转化为乙醇的机理的键级守恒研究

Rh上乙醇的生成机理,目前主要有两类.一是Ichikawa等为代表提出的“CO解离—CH_x(x=2或3)—乙酰基—乙醇”机理;另一是蔡启瑞等的“CO缔合—甲酰基(金属氧卡宾)—卡宾—乙烯酮—乙酰基—乙醇”机理.本文用Shustorovich的键级守恒—Morse势(BOC-MP)法对其进行了研究     

Synthesis and fluorination of nitro-substituted thionocarbonates

Thiocarbonylchloride reacts with -nitroalcohols yielding symmetrical thionocarbonates. Transesterification of bis(2-fluoro-2,2-dinitroethyl)thioncarbonate affords alkyl 2-fluoro-2,2-dinitroethylthionocarbonates. Fluorination of these thionocarbonates yields the corresponding difluoroformals.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 375–376, February, 1993.     

The anisotropic van der waals potential for He-N2

We have calculated the spherical v₀ and anisotropic radial components v₂ and v₄ in the usual Legendre expansion for the rigid rotor He-N₂ potential using the method of Tang and Toennies Potential curves covering the range of internuclear distances from 2.5 to 8.0 Å, which includes the minimum region, arc presented and compared with a recent experimental potential derived from differential total cross sections.     

Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

Selective Determination of Nanogram γ-Globulin in Human Blood Serum by Resonance Light Scattering of Functionalized Nano-PbS

Functionalized nano-PbS has been prepared and characterized. The functionalized nanoparticles have good dispersibility in water. Reaction of functionalized nano-PbS with γ-globulin (γ-IgG) results an enhanced resonance light scattering (RLS) around 385nm.However, when the content of HSA is lower than 0.5μg/ml^-1 the RLS enhancement is very weak and is nonlinear to concentration of HSA. Based on these results, a new direct quantitative determination method for γ-globulin in blood serum samples without separation is established.Under optimal conditions, the enhanced RLS intensity is in proportion to the γ-IgG concentration in the range 10-500ng/mL. The limit of detection is 2.75ng/mL. This method is proved to be very sensitive, rapid, simple and selective for detection of γ-IgG in blood serum.     

Copper ring-disk microelectrodes: fabrication, characterization, and application as an amperometric detector for capillary columns

A novel approach to the fabrication of metal ring-disk (RD) microelectrodes is presented that employs flexible chemical vapor deposition (CVD) and electrode modification techniques. Specifically, the development of a copper ring-disk microelectrode is described utilizing a combination of CVD coating, electroetching, and electroplating. Initially, a 25 μm diameter tungsten wire is concentrically coated by CVD with an insulating layer of silica, a layer of tungsten metal, and finally, a second outer layer of silica. The copper surface was prepared by first creating micrometer cavities by electrochemical etching the tungsten in hydroxide solutions followed by electrodeposition of copper from aqueous solutions of Cu(II). Each step of the process was characterized by scanning electron microscopy, optical microscopy, and cyclic voltammetry, demonstrating the preparation of a viable metal-based dual ring-disk microelectrode system. For the purpose of demonstrating the concept of introducing specific selectivity into the device, amperometric detection of galactose in 0.1 M NaOH was performed at +0.60 V in bulk solution and after flow injection analysis in a capillary column.     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

稀有气体亚稳态原子与CCl4和CBr4的能量转移反应

CBr_4和CCl_4分子的解离反应前人已做了许多工作,他们分别采用射频放电、电子轰击、He~ 的传能反应等方法研究了CCl_4和CBr_4的解离反应,得到了CCI(A)、CCl~ 、CBr~ 等碎片的发射光谱。有关亚稳态原子与它们的传能反应,只有某些较简单的报道,对传能反应机理也未作深入探讨。本文研究了各种亚稳态原子He(2~3S)、Ne(~3P_(0.2))、Ar(~3P_(0.2))与CCl_4和CBr_4分子的传能反应,并对反应机理进行了初步的讨论和分析。     

Small-angle X-ray scattering studies of the open and closed conformations of aspartate aminotransferase

Summary Aspartate aminotransferase was investigated by X-ray small-angle scattering. A small difference was found between the open (active) and the closed (liganded) conformation of the enzyme. The results were compared with X-ray crystallography data.

---

Untersuchungen zur Röntgenkleinwinkelstreuung der offenen und geschlossenen Konformation von Aspartat-Aminotransferase

Zusammenfassung Aspartat-Aminotransferase wurde mittels Röntgenkleinwinkelstreuung untersucht. Ein kleiner Unterschied zwischen der offenen (aktiven) und der geschlossenen (ligandierten) Konformation wurde gefunden. Die Ergebnisse wurden mit Röntgenkristallstrukturdaten verglichen.

---

Abbreviations AspAT aspartate aminotransferase