All-solid-state BiVO4/ZnIn2S4 Z-scheme composite with efficient charge separations for improved visible light photocatalytic organics degradation

Constructing a Z-scheme is a significant approach to improve the separation of photogene rated carriers for effective organic pollutant degradation.Herein,a BiVO4/ZnIn2S4(BZ) Z-scheme composite was successfully synthesized,and applied to photodegrade methyl orange(MO) irradiated by a LED lamp.Anchoring the BiVO4 on the ZnIn2S4 nanoparticles promoted the separation of photogenerated electronholes and broadened the light response range.The detailed characterizations,including surface morphology,elements valence state,and photocurrent performance,demonstrated that the enhanced separation of photogenerated carriers was the pivotal reason for the enhanced photocatalysis reaction.Benefiting from the excellent photocatalytic characteristics,the 5% mass ratio of BZ composite presented the highest MO degradation rate of 0.00997 min^-1,which was 1.9 and 10.3 times greater than the virgin ZnIn2S4 and BiVO4,respectively.Furthermore,the BZ hybrid materials indicated a well photo-stability in the four recycling tests.     

Defect-induced anisotropic surface reactivity and ion transfer processes of anatase nanoparticles

Surface reactivity and ion transfer processes of anatase TiO₂ nanocrystals were studied using lithium bis(trifluoromethylsulfone)imide (LiTFSI) as a probing molecule. Analysis of synthesized anatase TiO₂ by electron microscopy reveals aggregated nanoparticles (average size ~8 nm) with significant defects (holes and cracks). With the introduction of LiTFSI salt, the Li⁺-adsorption propensity towards the surface along the anatase (100) step edge plane is evident in both x-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analysis. Ab initio molecular dynamics (AIMD) analysis corroborates the site-preferential interaction of Li⁺ cations with oxygen vacancies and the thermodynamically favorable transport through the (100) step edge plane. Using ⁷Li nuclear magnetic resonance (NMR) chemical shift and relaxometry measurements, the presence of Li⁺ cations near the interface between TiO₂ and the bulk LiTFSI phase was identified, and subsequent diffusion properties were analyzed. The lower activation energy derived from NMR analysis reveals enhanced mobility of Li⁺ cations along the surface, in good agreement with AIMD calculations. On the other hand, the TFSI^– anion interaction with defect sites leads to CF₃ bond dissociation and subsequent generation of carbonyl fluoride-type species. The multimodal spectroscopic analysis including NMR, electron paramagnetic resonance (EPR), and x-ray photoelectron spectroscopy (XPS) confirms the decomposition of TFSI^– anions near the anatase surface. The reaction mechanism and electronic structure of interfacial constituents were simulated using AIMD calculations. Overall, this work demonstrates the role of defects at the anatase nanoparticle surface on charge transfer and interfacial reaction processes.     

准一维电荷密度波材料Ta2NiSe7 的转角及变温拉曼光谱研究

近年来, 低维过渡金属硫族化合物Ta2NiSe7 因其独特的电荷密度波和特殊的拓扑能带结构而引起广泛关注. 本文利用拉曼光谱技术对准一维电荷密度波材料Ta2NiSe7 的声子模式进行了系统研究. 角度依赖的偏振拉曼光谱实验表明室温下可以观测到19 个拉曼峰, 且所有观察到的拉曼模式强度随样品旋转呈周期性变化, 这意味着Ta2NiSe7 具有较高的面内各向异性. 通过群论分析, 我们确定了拉曼峰的具体模式为Ag 和Bg 两种原子振动模式. 在温度依赖的偏振拉曼光谱测量中, 我们在低温下还观察到了新的声子峰, 推测与电荷密度波结构调制引起的晶格畸变有关. 本研究提供了对Ta2NiSe7 声子振动的全面理解, 这可能为进一步研究电荷密度波与声子振动之间的关联提供参考意义.     

HfSe2 monolayer stability tuning by strain and charge doping

Strain and charge doping are the effective ways to modulate the electronic and phonon properties of materials. The effects of biaxial tensile strains and charge dopings on the stabilities of HfSe₂ monolayer have been systematically investigated using first-principles methods. Its two-dimensional Young's modulus is only 65.4 N/m, and it is easy to be stretched. When the tensile strain is applied on HfSe₂ monolayer, two of its phonon modes soften with one frequency decreasing to zero at critical strain. Our results show that electron and hole dopings could suppress the softening of phonon modes, and significantly enhance the ideal strength by 28% and 36%, respectively. The calculations for electronic structures and phonon dispersions provide the theoretical references for future nano-device designing.     

Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface

Muscovite mica is a widely accepted substrate for scanning probe microscopy (SPM) investigations. However, mica has intrinsic properties that alter samples and obstruct their analysis due to free charges build-up, ionic exchange and water adsorption taking place at the surface. In addition to interfacial phenomena, there is a growing interest in electrostatic charges on insulators as they are crucial in diverse applications. Despite the high demand for studies of this nature, experimental set-ups capable of resolving charge build-up at the micro-scale are still scarce and technically limited. Here, we report the imaging of surface charge dissipation on freshly cleaved mica by Kelvin-probe Force Microscopy (KPFM). A local electrostatic charge micro-domain was generated by friction between an atomic force microscope (AFM) tip and mica, and its decay was tracked by two-dimensional mapping using KPFM. We found time-dependent charge dissipation, which is attributed to the adsorption of water molecules on mica surface.     

Extending the response spectrum of organic photodetectors by quaternary active layer method with complementary absorption spectra

In this work, we report a new method for extending the response spectra of organic photodetectors (OPDs) by incorporating PBDT-TT-C and PBDT-TT-F in the P3HT:PC₆₁BM. The effects of PBDT-TT-C and PBDT-TT-F incorporation on the optical and electrical properties of OPDs were investigated, It was found that when the mass ratio of P3HT:PBDT-TT-F:PBDT-TT-C:PC₆₁BM was 12:2:2:8, the response spectrum of the active layer was extended to 780 nm. The responsivity (R) and external quantum efficiency (EQE) of the OPDs reached 340, 376, 315 mA/W and 67%, 88%, 85% under 630, 530, and 460 nm illumination and −1 V bias, respectively, and the detectivity (D*) reached 10¹² Jones. The results show that the inclusion of an appropriate amount of donor material with similar chemical structure and complementary absorption spectrum can reduce the influence of the doping material on the micro-morphology of the original film while improving the absorption of the spectrum. The interaction between the donor materials promotes the generation of photogenerated carriers and increases the photocurrent of the OPDs. In addition, the incorporation of the different component promotes crystallization of the film, resulting in a reduction in dark current of the OPDs.     

用自动凯氏定氮仪测定水中氨氮

用MgO控制预蒸馏水中的pH值,以硼酸溶液为吸收液,用稀硫酸进行中和滴定,用自动凯氏定氮仪测试水中的氨氮,检测下限为1mg/L,相对标准偏差在0.32%~1.04%范围内,加标回收率为96%~104%,并将该法与纳氏试剂比色法和离子色谱法进行了比较。     

1,8-萘酰亚胺衍生物的合成、表征及电存储性能

本文以三苯胺结构作为电子给体,与三种接有不同吸电子基团的1,8-萘酐反应合成了具有电子给-受体结构的N-(4-三苯胺)-1,8-萘酰亚胺(NA-ATPA)、N-(4-三苯胺)-(4-氰基)-1,8-萘酰亚胺(NA(CN)-ATPA)和N-(4-三苯胺)-(4-硝基)-1,8-萘酰亚胺(NA(NO_2)-ATPA),并对它们的结构进行了表征。利用紫外可见光谱、荧光发射光谱和循环伏安法对产物的光物理性能和电化学性能进行了测试,并测试了其存储行为,结果显示NA-ATPA表现出易失的静态随机存储行为(SRAM),NACN-ATPA表现出非易失的闪存型存储(Flash),NA(NO_2)-ATPA表现出非易失只读型存储(WORM)。三种萘酰亚胺对存储行为中高导态的维持能力逐渐增强,其原因是引入的吸电子基团的吸电子性越强,其LUMO值和能隙值降低的越多,越利于电荷转移,形成更稳定的电荷转移络合物。另外,本文还对原料和产物的电子结构、分子轨道和能级进行了分子模拟计算,研究了三种化合物基态和激发态的差别,并对其电子转移过程进行了理论分析。     

密度泛函理论下的分子电负性(Ⅳ)──大环分子的总能量和电荷分布的直接计算

以密度泛函理论表述的电负性定义及其均衡原理为基础,提出了一个修正电负性均衡方法(MEEM),可直接用于计算各类分子的总能量和原子电荷分布。通过对3个较大环状分子18-crown-6,24-crown-8和24-cryptand的实际计算,发现其计算结果与从头计算结果接近。     

Metal-to-Oxide Charge Transfer Observed by a Kelvin Probe Force Microscope

The charge transfer from a nanometer-sized transition metal particle to a catalyst support is thought to affect reactions over the metal surface. We propose the application of Kelvin probe force microscope, which is an extension of the atomic force microscope, to observe the charge transfer particle-by-particle. Our recent results on Na adatoms, Cl adatoms, Pt adatoms and particles, and Ni particles evaporated on TiO₂(110) are reviewed.